Accurate Stiffness Matrix for Nonprismatic Members
Publication: Journal of Structural Engineering
Volume 133, Issue 8
Abstract
In this note, the transfer matrix method is adopted to deduce general expressions for the components of the stiffness matrix and equivalent node load vector of nonprismatic members, and the effect of warping is not considered. State vectors are introduced to describe the nodal forces and displacements of a structural member. The relation between the state vectors of the left node and the right node of the member is given by a matrix referred to as the transfer matrix. It is found that the stiffness matrix of the member can be expressed in terms of the transfer matrix. Therefore, an accurate expression for the stiffness matrix can be obtained as long as the corresponding transfer matrix can be accurately determined. The method proposed is a general procedure for the stiffness matrix derivation of both continuous nonprismatic members and discontinuous nonprismatic members. The correctness of the obtained stiffness expressions is verified by two simple numerical examples.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research reported here was financially supported by National Science & Technology Key Task Program of China (Grant No. 2004BA904B02), Science and Technology Program of Beijing (Grant No. Z000402804221), and National Natural Science Foundation of China (Grant No. 50638050).
References
Al-Gahtani, H. J. (1996). “Exact stiffnesses for tapered members.” J. Struct. Eng., 122(10), 1234–1239.
Gu, J. L. (1986). “An improved transfer matrix-direct integration method for rotor dynamics.” ASME J. Vib., Acoust., Stress, Reliab. Des., 110(2), 182–188.
Luo, Y., Wu, F., and Xu, X. (2006). “Element stiffness matrix and modified coefficients for circular tube with tapered ends.” J. Constr. Steel Res., 62(9), 856–862.
Pestel, S. C., and Leckie, F. A. (1963). “Introduction to state vectors and transfer matrices.” Matrix methods in elastomechanics, McGraw-Hill Book Co., New York, 51–60.
Tena-Colunga, A. (1996). “Stiffness formulation for nonprismatic beam elements.” J. Struct. Eng., 122(12), 1484–1489.
Yan, Y. M. (2003). “Overall stability analysis of high-rise steel frames.” J. Xi’an Univ. of Sci. and Techn., 23(4), 382–385 (in Chinese).
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Sep 5, 2006
Accepted: Feb 12, 2007
Published online: Aug 1, 2007
Published in print: Aug 2007
Notes
Note. Associate Editor: Kim J. R. Rasmussen
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.