Reference-Free NDT Technique for Debonding Detection in CFRP-Strengthened RC Structures
Publication: Journal of Structural Engineering
Volume 133, Issue 8
Abstract
This study attempts to develop a real-time debonding monitoring system for carbon fiber-reinforced polymer (CFRP) strengthened structures by continuously inspecting the bonding condition between the CFRP layer and the host structure. The uniqueness of this study is in developing a new concept and theoretical framework of nondestructive testing (NDT) in which debonding is detected without relying on previously obtained baseline data. The proposed reference-free damage diagnosis is achieved based on the concept of time reversal acoustics (TRA). In TRA, an input signal at an excitation point can be reconstructed if the response signal measured at another point is reemitted to the original excitation point after being reversed in the time domain. Examining the deviation of the reconstructed signal from the known initial input signal allows instantaneous identification of damage without requiring a baseline signal representing the undamaged state for comparison. The concept of TRA has been extended to guided wave propagations within the CFRP-strengthened reinforced concrete (RC) beams to improve the detectability of local debonding. Monotonic and fatigue load tests of large-scale CFRP-strengthened RC beams are conducted to demonstrate the potential of the proposed reference-free debonding monitoring system.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by an NSF Grant No. CMS-0529208, Pennsylvania Infrastructure Technology Alliance (PITA) program and Smart Infra-Structure Technology Center (SISTeC). The writers would like to thank the CMS Program Manager, Dr. Shi Lui, and the PITA codirector, Professor Cristina Amon for their supports. The writers also like to thank Seung Bum Kim and Dena E. De Iuliis for assisting our experiments. The first author would like to acknowledge the Electric Power National Scholarship Program at the Ministry of Commerce, Industry and Energy (MOCIE) in Gwachon, South Korea. The beam testing was conducted by Andrew Zorn and Benjamin Reeve in the Watkins-Haggart Structural Engineering Laboratory at the University of Pittsburgh.
References
Akuthota, B., Hughes, D., Zoughi, R., Myers, J., and Nanni, A. (2004). “Near-field microwave detection of disbond in carbon fiber reinforced polymer composites used for strengthening cement-based structures and disbond repair verification.” J. Mater. Civ. Eng. 16(6), 540–546.
Ansari, F. (2005). “Fiber optic health monitoring of civil structures using long gage and acoustic sensors.” Smart Mater. Struct. 14(3), S1–S7.
Draeger, C., Cassereau, D., and Fink, M. (1997). “Theory of the time-reversal process in solids.” J. Acoust. Soc. Am., 102(3), 1289–1295.
Ekenel, M., Stephen, V., Myers, J. J., and Zoughi, R. (2004). “Microwave NDE of RC beams strengthened with CFRP laminates containing surface defects and tested under cyclic loading.” Proc., 16th World Conf. on Nondestructive Testing, Montreal, Canada.
Feng, M. Q., Flaviis, F., and Kim, Y. J. (2000). “Use of microwaves for damage detection of fiber reinforced polymer-wrapped concrete structure.” J. Eng. Mech. 128(2), 172–183.
Fink, M. (1999). “Time-reversed acoustics.” Sci. Am., 281(5), 91–97.
Fink, M., and Prada, C. (2001). “Acoustic time-reversal mirrors.” Inverse Probl., 17, R1–R38.
Giurgiutiu, V., Harries, K. A., Petrou, M. F., Bost, J., and Quattlebaum, J. (2003). “Disbond detection with piezoelectric wafer active sensors in RC structures strengthened with FRP composite overlays.” Earthquake Eng. Eng. Vibration, 2(2), 213–224.
Giurgiutiu, V., and Lyshevski, S. E. (2004). Micromechatronics: Modeling, analysis, and design with MATLAB, CRC, Boca Raton, Fla.
Hong, S., and Harichandran, R. (2005). “Sensors to monitor CFRP/concrete bond in beams using electrochemical impedance spectroscopy.” J. Compos. Constr., 9(6), 515–523.
Ing, R. K., and Fink, M. (1996). “Time recompression of dispersive lamb waves using a time reversal mirror—Application to flaw detection in thin plates.” Proc., 1966 IEEE Ultrasonics Symp., 1, 659–663.
Karbhari, V. M., Chin, J. W., and Reynaud, D. (2000). “Critical gaps in durability data for FRP composites in civil infrastructure.” Proc., 45th Int. Soc. for the Advancement of Materials and Process Engineering (SAMPLE) Symp. and Exhibition, 45, 549–563.
Kessler, S. S., Johnson, C. E., and Dunn, C. T. (2003). “Experimental application of optimized Lamb wave actuating/sensing patches for health monitoring of composite structures.” Proc., 4th Int. Workshop on Structural Health Monitoring, Stanford Univ., 429–436.
Kim, S., and Sohn, H. (2006). “Application of time reversal guided waves to field bridge testing for baseline free damage diagnosis.” Proc., SPIE Int. Symp., Smart Structure and Materials and Nondestructive Evaluation for Health Monitoring and Diagnostics, SPIE.
Kim, S., Sohn, H., Greve, D., and Oppenheim, I. (2005). “Application of a time reversal process for baseline-free monitoring of a bridge steel girder.” Proc., Int. Workshop on Structural Health Monitoring, Sage Publications.
Levar, J., and Hamilton, H. (2003). “Nondestructive evaluation of carbon fiber-reinforced polymer-concrete bond using infrared thermography.” ACI Mater. J., 100(1), 63–72.
Luangvilai, K., Punurai, W., and Jacobs, L. (2002). “Guided Lamb wave propagation in composite plate/concrete component.” J. Eng. Mech., 128(12), 1337–1341.
Mal, A. K., Shih, F. J., Ricci, F., and Sauvik, B. (2005). “Impact damage detection in composite structures using Lamb waves.” Proc. SPIE 5768, 295–303.
Mirmiran, A., Shahawy, M., and Echary, H. (1999). “Acoustic emission monitoring of hybrid FRP-concrete columns.” J. Eng. Mech., 125(8), 899–905.
Mirmiran, A., and Wei, Y. (2001). “Damage assessment of FRP-encased concrete using ultrasonic pulse velocity.” J. Eng. Mech., 127(2), 126–135.
Park, H. W., Sohn, H., Law, K. H., and Farrar, C. R. (2007). “Time reversal active sensing for health monitoring of a composite plate.” J. Sound Vib., 302(1–2), 55–66.
Reeve, B. (2005). “Effect of adhesive stiffness and CFRP geometry on the behavior of externally bonded CFRP retrofit measures subject to monotonic loads.” MS thesis, Dept. of Civil and Environmental Engineering, Univ. of Pittsburgh, Pittsburgh, Pa.
Rose, L. J. (1999). Ultrasonic waves in solid media, Cambridge Univ. Press, New York.
Sohn, H. (2007). “Effects of environmental and operational variability on structural health monitoring.” Special Issue of Philosophical Transactions of the Royal Society on Structural Health Monitoring, 365, 539–560.
Sohn, H., Kim, S., and Park H. (2005). “Searching for a reference-free damage detection technique.” Proc., 2nd Int. Workshop on Advanced Smart Materials and Smart Structures Technology, Gyeong-ju, Korea.
Sun, F. P., Chaudhry Z., Liang, C., and Rogers, C. A. (1995). “Truss structure integrity identification using PZT sensor-actuator.” J. Intell. Mater. Syst. Struct., 6, 134–139.
Viktorov, I. A. (1967). Rayleigh and Lamb waves, Plenum, New York.
Zorn, A. (2006). “Effect of adhesive stiffness and CFRP geometry on the behavior of externally bonded CFRP retrofit measures subject to fatigue loads.” MS thesis, Dept. of Civil and Environmental Engineering, Univ. of Pittsburgh, Pittsburgh, Pa.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Apr 24, 2006
Accepted: Jan 8, 2007
Published online: Aug 1, 2007
Published in print: Aug 2007
Notes
Note. Associate Editor: Ahmet Emin Aktan
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.