Development of Multidirectional Structural Testing System Applicable to Pseudodynamic Test
Publication: Journal of Structural Engineering
Volume 133, Issue 5
Abstract
An accurate multidirectional structural testing system is developed. This testing system is used to carry out a multidirectional pseudodynamic test with the help of a unique three-dimensional hinge and a spatial truss-type transducer. With this testing system, multidirectional seismic behaviors of thin-walled circular steel columns are examined in comparison with their in-plane behavior. Further, the accuracy of the testing system is confirmed by the numerical results of nonlinear FEM shell analyses.
Get full access to this article
View all available purchase options and get full access to this article.
References
Goto, Y., Wang, Q. Y., and Obata, M. (1998). “FEM analysis for hysteretic behavior of thin-walled steel columns.” J. Struct. Eng., 124(11), 1290–1301.
Hakuno, M., Shidawara, M., and Hara, T. (1969). “Dynamic destructive test of a cantilever beam controlled by an analog computers.” Trans. Jpn. Soc. Civ. Eng., 171, 1–9 (in Japanese).
Hibbitt, Karlson, and Sorenson, Inc. (HKS). (2002). ABAQUS/STANDARD user’s manual, Version 5.8, Vols. I, II, and III. Pawtucket, R.I.
Japan Road Association (JRA). (2002). Specification for road bridges and commentaries: V. Earthquake resistance design, Tokyo, Maruzen (in Japanese).
Jiang, L., Goto, Y., and Obata, M. (2002). “Hysteretic modeling of thin-walled circular steel columns under biaxial bending.” J. Struct. Eng., 128(3), 319–327.
JSCE Subcommittee on Investigation of Seismic Damage of Steel Structure. (2000). “Investigation of causes of damage to steel structure on Hanshin-Awaji Earthquake disaster.” J. Struct. Mech. and Earthquake Engrg, 647/1-51, 17–30 (in Japanese).
Kitajima, K., Adachi, H., and Nakanishi, M. (1994). “Shaking table tests on reinforced concrete columns under bi-directional earthquake motions.” J. Struct. Constr. Eng., 455, 137–146 (in Japanese).
Mahin, S. A., Shing, P-S B., Thewalt, C. R., and Hanson, R. D. (1989). “Pseudodynamic test method-current status and future directions.” J. Struct. Eng., 115(8), 2113–2128.
Nishimura, N., Ikeuchi, T., and Taniguchi, N. (1998). “Numerical simulation on damage to pipe piers in Hyogoken-Nanbu earthquake.” Eng. Struct., 20(4–6), 291–299.
Saatcioglu, M., and Ozcebe, G. (1989). “Response of reinforced concrete columns to simulate seismic loading.” ACI Struct. J., 86(1), 3–12.
Shing, P. B., Nakashima, M., and Bursi, O. S. (1996). “Application of pseudodynamic test method to structural research.” Earthquake Spectra, 12, 29–56.
Takanashi, K. (1975). “Non-linear earthquake response analysis of structures by a computer actuator on-line system (Part 1 details of the system).” Trans. Architectural Institute of Japan, 229, 77–83 (in Japanese).
Takanashi, K., and Nakashima, M. (1987). “Japanese activities on on-line testing.” J. Struct. Eng., 113(7), 1014–1032.
Takizawa, H., and Aoyama, H. (1976). “Biaxial effect inmodeling response of R/C structures.” Earthquake Eng. Struct. Dyn., 4, 523–552.
Watanabe, E., Sugiura, K., and Oyawa, W. (2000). “Effects of multi-directional displacement paths on the cyclic behaviour of rectangular hollow steel columns.” J. Strut. Mech. Earthquake Engrg, JSCE, 17, 69s–85s.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Sep 10, 2003
Accepted: Jul 31, 2006
Published online: May 1, 2007
Published in print: May 2007
Notes
Note. Associate Editor: Sashi K. Kunnath
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.