Comparison of Tests of a Nonlinear Structure Using a Shake Table and the EFT Method
Publication: Journal of Structural Engineering
Volume 132, Issue 9
Abstract
The viability of effective force testing (EFT), a real-time dynamic testing procedure for large-scale structures, has been validated by comparing results of tests on idealized structural models to analytical results. In this paper, the results of tests on a shake table are compared to those conducted using the EFT method. The test structure was a one-story steel structure consisting of typical structural components. The paper also presents an overview of critical issues required for conducting the EFT test, and highlights several problems and solutions that may affect the performance of EFT tests. The comparison of the test results indicates that with proper velocity feedback compensation, the EFT method can be used to apply real-time seismic simulation to structures undergoing nonlinear deformation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Funding for this research was provided by the National Science Foundation (NSF) under Grant No. NSFCMS-9821076. The Doctor Dissertation Fellowship provided by the 3M Corporation through the Graduate School at the University of Minnesota is also acknowledged. Information contained herein does not necessarily represent the views of the sponsors.
References
Chopra, A. K. (1995). Dynamics of structures: Theory and applications to earthquake engineering, Prentice–Hall, Englewood Cliffs, N.J.
Dimig, J., Shield, C., French, C., Bailey, F., and Clark, A. (1999). “Effective force testing: A method of seismic simulation for structural testing.” J. Struct. Eng., 125(9), 1028–1037.
Dyke, S. J., Spencer, B. F., Quast, P., and Sain, M. K. (1995). “Role of control-structure interaction in protective system design.” J. Eng. Mech., 121(2), 322–338.
Franklin, G. F., Powell, J. D., and Emami-Naeini, A. (1994). Feedback control of dynamic systems, 3rd Ed., Addison-Wesley, Boston.
Mahin, S. A., and Shing, P. B. (1985). “Pseudodynamic method for seismic testing.” J. Struct. Eng., 111(7), 1482–1503.
Mahin, S. A., Shing, P. B., Thewalt, C. R., and Hanson, R. D. (1989). “Pseudodynamic test method—Current status and future directions.” J. Struct. Eng., 115(8), 2113–2128.
Shield, C., French, C., and Timm, J. (2001). “Development and implementation of the effective force testing method for seismic simulation of large-scale structures.” Philos. Trans. R. Soc. London, Ser. A, 359, 1911–1929.
Thewalt, C. R., and Mahin, S. A. (1987). “Hybrid solution techniques for generalized pseudodynamic testing.” Rep. UBC/EERC-87/09, EERC, Univ. of California, Berkeley, Calif.
Timm, J. (1999). “Natural velocity feedback correction for effective force testing.” Master’s thesis, Civil Engineering, Univ. of Minnesota, Minneapolis.
Zhao, J. (2003). “Development of EFT for nonlinear SDOF systems.” Ph.D. thesis, Civil Engineering, Univ. of Minnesota, Minneapolis.
Zhao, J., French, C., Shield, C., and Posbergh, T. (2002). “Development of EFT for nonlinear SDOF systems.” Proc., 7th National Conf. on Earthquake Engineering, Boston.
Zhao, J., French, C., Shield, C., and Posbergh, T. (2003a). “Considerations for the development of real-time dynamic testing using servo-hydraulic actuation.” Earthquake Eng. Struct. Dyn., 32(11), 1773–1794.
Zhao, J., French, C.,Shield, C., and Posbergh, T. (2003b). “Nonlinear velocity compensation for Effective Force Testing.” Proc., 2003 Structural Congress and Exhibition, Seattle.
Zhao, J., Shield, C., French, C., and Posbergh, T. (2005). “Nonlinear system modeling and velocity feedback compensation for EFT.” J. Eng. Mech., 131(3), 244–253.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Mar 25, 2005
Accepted: Dec 16, 2005
Published online: Sep 1, 2006
Published in print: Sep 2006
Notes
Note. Associate Editor: Vinay Kumar Gupta
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.