Analytical Stress–Strain Relationship for Concrete Confined by Steel Stirrups and/or FRP Jackets
Publication: Journal of Structural Engineering
Volume 132, Issue 9
Abstract
This paper presents a plain strain analytical model, based on the elasticity theory, to determine the confining pressures of transverse reinforcements on the concrete core of a reinforced concrete member. The analytical evaluation of the confining pressures was first carried out on reinforced sections with square and circular stirrups, and subsequently on reinforcement configurations of greater complexity with square and rectangular stirrups and supplementary cross ties. Finally, the model has been used to evaluate the confining pressures applied by external wrapping in any material [fiber-reinforced polymer (FRP), S-glass, steel, etc.] and to design better combinations of techniques and confinement materials. In order to obtain the stress–strain curves due to passive confinement, an analogy between square and circular sections has been introduced. In this way, any active confinement model derived by triaxial tests on cylindrical specimens can be used. The model has been validated by comparing its predictions with results from existing models and experimental tests.
Get full access to this article
View all available purchase options and get full access to this article.
References
Attard, M. M., and Setunge, S. (1996). “Stress–strain relationship of confined and unconfined concrete.” ACI Mater. J., 93(5), 432–442.
Braga, F., and Laterza, M. (1998). “A new approach to the confinement of RC columns.” Proc., 11th European Conf. on Earthquake Engineering, A. A. Balkema, Rotterdam, The Netherlands.
Cusson, D., and Paultre, P. (1994). “High-strength concrete columns confined by rectangular ties.” J. Struct. Eng., 120(3), 783–804.
Franciosi, V. (1988). “Toeria dell’elasticità.” Fondamenti di scienza delle costruzioni, Liguori, ed., Vol. 1, S.r.l., Napoli, Italy (in Italian).
Gigliotti, R. (1998). “Concrete confinement and ductility of the RC members.” Thesis, Structural Engineering, Univ. della Basilicata, Potenza, Italy (in Italian).
Hoshikuma, J., Kawashima, K., Nagaya, K., and Taylor, A. W. (1997). “Stress–strain model for confined reinforced concrete in bridge piers.” J. Struct. Eng., 123(5), 624–633.
Karabinis, A. I., and Rousakis, T. C. (2002). “Concrete confined by FRP material: A plasticity approach.” Eng. Struct., 24, 923–932.
Kupfer, H., Hilsdorf, H. K., and Rüsch, H. (1969). “Behavior of concrete under biaxial stresses.” ACI J., 66(52), 656–666.
Laterza, M. (1996). “Strength of concrete confined by steel stirrups.” Ph.D. thesis, Structural and Earthquake Engineering, Univ. di Salerno e Univ. della Basilicata, Potenza, Italy (in Italian).
Mander, J. B., Priestley, M. J. N., and Park, R. (1988a). “Observed stress–strain behavior of confined concrete.” J. Struct. Eng., 114(8), 1827–1849.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988b). “Theoretical stress–strain model for confined concrete.” J. Struct. Eng., 114(8), 1804–1826.
Moehle, J. P., and Cavanagh, T. (1985). “Confinement effectiveness of crossties in RC.” J. Struct. Eng., 111(10), 2105–2120.
Nagashima, T., Sugano, S., Kimura, H., and Ichikawa, A. (1992). “Monotonic axial compression test on ultra-high-strength concrete tied columns.” Proc., 10th World Conf. on Earthquake Engineering, A. A. Balkema, Rotterdam, The Netherlands, 2983–2988.
Park, R., Priestley, M. J. N., and Gill, W. D. (1982). “Ductility of square-confined concrete columns.” J. Struct. Div. ASCE, 108(4), 929–950.
Saafi, M., Toutanji, H. A., and Li, Z. (1999). “Behavior of concrete columns confined with fiber reinforced polymer tubes.” ACI Mater. J., 96(4), 500–509.
Saatcioglu, M., and Razvi, S. R. (1998). “High-strength concrete columns with square sections under concentric compression.” J. Struct. Eng., 124(12), 1438–1447.
Samaan, M., Mirmiram, A., and Shahawy, M. (1998). “Model of concrete confined by fiber composites.” J. Struct. Eng., 124(9), 1025–1031.
Scott, B. D., Park, R., and Priestley, M. J. N. (1982). “Stress–strain behavior of concrete confined by overlapping hoops at low and high strain rates.” ACI J., 79(2), 13–27.
Sheikh, S. A., and Uzumeri, S. M. (1980). “Strength and ductility of tied concrete columns.” J. Struct. Div. ASCE, 106(5), 1079–1102.
Sheikh, S., and Uzumeri, S. M. (1982). “Analytical model for concrete confinement in tied columns.” J. Struct. Div. ASCE, 108(12), 2703–2722.
Spoelstra, M. R., and Monti, G. (1999). “FRP-confined concrete model.” J. Compos. Constr., 3(3), 143–150.
Vallenas, J., Bertero, V. V., and Popov, E. P. (1977). “Concrete confined by rectangular hoops and subjected to axial load.” Rep. UCB/EERC 77/13, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Aug 10, 2004
Accepted: Nov 28, 2005
Published online: Sep 1, 2006
Published in print: Sep 2006
Notes
Note. Associate Editor: Jin-Guang Teng
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.