Application of Internally Damped Shearbeam Model to Analysis of Buildings under Earthquakes: Robust Procedure for Quick Evaluation of Seismic Performance
Publication: Journal of Structural Engineering
Volume 132, Issue 7
Abstract
A step-by-step procedure for linear analysis of building structures with rigid floor beams is developed and presented. The method outputs the maximum story drift envelope, and consists of a series of explicit formulas that do not require iteration. The basis of the method is an internally damped shearbeam model. Drift demand spectra are used to provide information on the ground motion hazard of the site. In addition to the drift demand spectra, two additional spectra are incorporated, which describe the higher mode behavior. To test accuracy, three sample buildings structures (3-, 9-, and 20-story buildings at Los Angeles) are analyzed for five sample earthquake records using the proposed procedure, and conventional time history analysis. A comparison of the results shows that the proposed procedure is accurate enough for quick evaluation of seismic performance.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abrate, S. (1986). “Vibration of nonuniform rods and beams.” J. Sound Vib., 185, 703–716.
Bapat, C. N. (1995). “Vibration of rods with uniformly tapered sections.” J. Sound Vib., 185, 185–189.
Chajes, M. J., Finch, W. W., Jr., and Kirby, J. T. (1996). “Dynamic analysis of a ten-story reinforced concrete building using continuum model.” Comput. Struct., 58, 487–498.
Chopra, A. K. (1995). Dynamics of structures, Prentice–Hall, Upper Saddle River, N.J.
Clough, R. W., and Penzien, J. (1975). Dynamics of structures, 1st Ed., McGraw–Hill, New York.
Gülkan, P., and Akkar, S. (2002). “A simple replacement for the drift spectrum.” Eng. Struct., 24(11), 1477–1484.
Gupta, A. (1998). “Seismic demands for performance evaluation of steel moment resting frame structures.” Ph.D. thesis, Stanford Univ., Stanford, Calif.
Iwan, W. D. (1994). “Near-field consideration in specification of seismic design motions.” Proc., 10th European Conf. on Earthquake Engineering, Vol. 1, A. A. Balkema, Rotterdam, The Netherlands, 257–267.
Iwan, W. D. (1995). “Drift demand spectra for selected Northridge sites.” SAC Final Rep. 95-07, Earthquake Engineering Research Laboratory, California Institute of Technology, Pasadena, Calif.
Iwan, W. D. (1997). “Drift demand spectrum: Measure of demand for earthquake ground motions.” J. Struct. Eng., 123(4), 397–404.
Jacobsen, L. S., and Ayre, R. S. (1958). Engineering vibrations, McGraw–Hill, New York.
Kim, J. (2003). “Performance-based building design using wave propagation concepts.” Ph.D. thesis, Univ. of Michigan at Ann Arbor, Ann Arbor, Mich.
Kim, J., and Collins, K. R. (1999). “Uniform hazard drift demand spectra.” Proc., 1st Int. Conf. on Advances in Structural Engineering and Mechanics (ASEM’99), Techno-Press, Seoul, Korea.
Kim, J., and Collins, K. R. (2002). “Closer look at the drift demand spectrum.” J. Struct. Eng., 128(7), 942–945.
Kumar, B. M., and Sujith, R. I. (1997). “Exact solutions for the longitudinal vibration of non-uniform rods.” J. Sound Vib., 207, 721–729.
Li, Q. S., Wu, J. R., and Xu, J. (2002). “Longitudinal vibration of multi-step non-uniform structures with lumped masses and spring support.” Appl. Acoust., 63, 333–350.
Miranda, E., and Reyes, C. J. (2002). “Approximate lateral drift demands in multistory buildings with nonuniform stiffness.” J. Struct. Eng., 128(7), 840–849.
Nollet, M.-J., and Smith, B. S. (1998). “Stiffened-story wall-frame tall building structure.” Comput. Struct., 66, 225–240.
Powell, G. (1993). DRAIN-2DX element description and user guide for element Type01, Type02, Type04, Type06, Type09, and Type15, Version 1.10, UCB/SEMM-93/18 Ed., Dept. of Civil Engineering, Univ. of California, Berkeley, Calif.
Prakash, V. G. P., and Campbell, S. (1993). DRAIN-2DX: Base program description and user guide, version 1.10, UCB/SEMM-93/17 Ed., Dept. of Civil Engineering, Univ. of California, Berkeley, Calif.
Press, W. H., Teukolsky, S. A., Vettering, W. T., and Flannery, B. P. (1992). Numerical recipes in C: The art of scientific computing, 2nd Ed., Cambridge University Press, Cambridge, U.K.
Roberts, M. W., and Lutes, L. (2001). “Seismic structural analysis with a wave propagation model.” Structural Safety and Reliability, Proc., 8th Int. Conf., ICOSSAR 2001, ICOSSAR, Newport Beach, Calif.
Safak, E. (1998). “Propagation of seismic waves in tall buildings.” Int. J. Struct. Des. Tall Buildings, 7, 295–306.
Safak, E. (1999). “Wave propagation formulation of seismic response of multistory buildings.” J. Struct. Eng., 125(4), 426–437.
Structural Engineers Association of California. (1994). Uniform building code, International Code Council, Whittier, Calif.
Toda, M. (1988). Theory of nonlinear lattices, 2nd Ed., Springer, Tokyo.
Toda, M. (1989). Nonlinear waves and solitons, Kluwer Academic, Tokyo.
Westergaard, H. M. (1933). “Earthquake-shock transmission in tall buildings.” Eng. News-Rec., 111(22), 654–656.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jun 7, 2004
Accepted: Aug 3, 2005
Published online: Jul 1, 2006
Published in print: Jul 2006
Notes
Note. Associate Editor: Gregory A. MacRae
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.