Improved Strength Model for Interior Flat Plate–Column Connections Subject to Unbalanced Moment
Publication: Journal of Structural Engineering
Volume 132, Issue 5
Abstract
A numerical study of interior flat plate–column connections subjected to unbalanced moments was performed by using nonlinear finite element analysis. The distribution and strength of the eccentric shear and flexural moment that develop at the connections were studied. The results showed that the distribution of the eccentric shear stress was different from those specified in current design codes, and the eccentric shear strength was significantly affected by the flexural moment acting at the same critical section. Based on the findings, an improved design method for the interior flat plate–column connections was developed and was verified by the comparisons with existing test results. These comparisons showed that the proposed design method predicted the punching shear strength of the connections subject to unbalanced moments better than the current design methods.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented herein has been carried out by the financial assistance of the Ministry of Construction and Transportation (Grant No. UNSPECIFIED03R&D C04-01) and the Korea Earthquake Engineering Research Center, and the writers are grateful to the authorities for their support.
References
American Concrete Institute (ACI). (2002). “Building code requirements for structural concrete and commentary.” ACI 318-02/318R-02, Detroit.
CEB-FIP. (1993). “Structural concrete textbook on behavior.” Design and performance updated knowledge of the CEB-FIP model code 1990, Lausanne, Switzerland.
Cervenka, V., and Gerstle, K. H. (1971). “Inelastic analysis of reinforced concrete panels: Theory.” Publications of the IABSE, 31(11), 31–45.
Desayi, P., and Krishman, S. (1964). “Equation for the stress-strain curve of concrete.” ACI J., 61(9), 1227–1239.
Elstner, R. C., and Hognestad, E. (1953). “An investigation of reinforced concrete slabs failing in shear.” Mineographed Rep., Prepared for Univ. of Illinois, Dept. of Theoretical and Applied Mechanics, Univ. of Illinois, Champaigne, Ill.
Farhey, D. N., Adin, M. A., and Yankelevsky, D. Z. (1993). “RC flat slab-column subassemblages under lateral loading.” J. Struct. Eng., 119(6), 1903–1916.
Farhey, D. N., Yankelevsky, D. Z., and Adin, M. A. (1997). “Resistance mechanism model for reinforced concrete flat slab-column frame connections.” ACI Struct. J., 94(6), 653–662.
Feenstra, P. H., and de Borst, R. (1993). “Aspects of robust computational modeling for plain and reinforced concrete.” Heron, 4, 5–26.
Fraser, D. J. (1983). “Elastic analysis of laterally loaded frames.” J. Struct. Eng., 109(6), 1479–1489.
Ghali, A., Elmasri, M. Z., and Diler, W. (1976). “Punching of flat plates under static and dynamic horizontal force.” ACI J., 73(10), 566–572.
Hwang, S. J., and Moehle, J. P. (1993). “An experimental study of flat-plate structures under vertical and lateral load.” Rep. No. UCB/EERC-93/03, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Karsan, I. D., and Jirsa, J. O. (1969). “Behavior of concrete under compressive loadings.” J. Struct. Eng., 95(12), 2543–2563.
Kotsovos, M. D. (1987). “Shear failure of reinforced concrete beams: A reappraisal of current concepts.” Bulletin d’Information, No. 178/179, Comité Euro-International du Bétou, 103–112.
Kupfer, H. B., Hildorf, H. K., and Rusch, H. (1969). “Behavior of concrete under biaxial stresses.” ACI J., 66(8), 656–666.
Luo, Y. H., and Durrani, A. J. (1995). “Equivalent beam model for flat-slab buildings-Part1: Interior connections.” ACI Struct. J., 92(1), 115–124.
Luo, Y. H., Durrani, A. J., and Conte, J. P. (1994). “Equivalent frame analysis of flat plate buildings for seismic loading.” J. Struct. Eng., 120(7), 2137–2155.
Okamura, H., and Maekawa, K. (1991). Nonlinear analysis and constitutive models of reinforced concrete, Gihodo-Shuppan Co., Tokyo.
Pan, A. D., and Moehle, J. P. (1992). “An experimental study of slab-column connections.” ACI Struct. J., 89(6), 626–638.
Park, H., and Choi, K. (2004). “Strength model for punching shear of flat plate-column connections.” J. Korea Concrete Institute, 16(2), 163–174.
Park, H., and Klingner, R. E. (1997). “Nonlinear analysis of RC members using plasticity with multiple failure criteria.” J. Struct. Eng., 123(5), 643–651.
Ramm, E. (1981). “Strategies for tracing the nonlinear response near limit points.” Nonlinear finite element analysis in structural mechanics, W. Wundelich, E. Stein, and K. J. Bathe, eds., Springer, Berlin, 63–89.
Rankin, G. I. B., and Long, A. E. (1987). “Predicting the enhanced punching strength of interior slab-column connections.” Proc. Institution Civil Eng., 82(1), 1165–1186.
Reinhardt, H. W., and Walraven, J. C. (1982). “Crack in concrete subject to shear.” J. Struct. Div. ASCE, 108(1), 207–224.
Theodorakopoulos, D. D., and Swamy, R. N. (2002). “Ultimate punching shear strength analysis of slab-column connections.” Cem. Concr. Compos., 24, 509–521.
Vanderbilt, M. D. (1972). “Shear strength of continuous plates.” J. Struct. Div. ASCE, 98(5), 961–973.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression-field theory for reinforced concrete elements subjected to shear.” J. Struct. Eng., 83(2), 219–231.
Weaver, W., Jr., and Johnston, P. R. (1984). Finite elements for structural analysis, Prentice-Hall, Englewood Cliffs, N.J.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Oct 23, 2002
Accepted: Jul 15, 2005
Published online: May 1, 2006
Published in print: May 2006
Notes
Note. Associate Editor: Yan Xiao
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.