Partial Interaction Shear Flow Forces in Continuous Composite Steel–Concrete Beams
Publication: Journal of Structural Engineering
Volume 132, Issue 2
Abstract
Most research since the introduction of mechanical forms of shear connection to provide interaction in steel–concrete beams in the 1940s has focused on simply supported beams. With the use of advanced computer techniques current research on continuous beams is increasing and tends to focus on design issues. However, the fatigue assessment of existing composite bridges worldwide is growing rapidly due to increasing allowable load limits and because many of the bridges are reaching the end of their originally anticipated design life. Based on linear elastic partial interaction theory, this paper develops simplified equations and practical assessment charts that are used to more accurately assess the remaining strength or endurance of the shear connection in continuous composite beams. This research extends the tiered assessment approach previously published for simply supported beams so that it is now applicable to composite beams with any number of spans, varying span lengths and varying shear connection distribution, and/or cross-sectional geometry. The technique is validated using a finite element program developed to model the behavior of composite structures and an example application in a fatigue assessment is given.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ansourian, P. (1981). “Experiments on continuous composite beams.” Proc. Inst. Civ. Eng., 71(2), 25–51.
Barnard, P. R., and Johnson, R. P. (1965). “Plastic behavior of continuous composite beams.” Proc. Inst. Civ. Eng., 32, 180–197.
Fabbrocino, G., Manfredi, G., and Cosenza, E. (2000). “Analysis of continuous composite beams including partial interaction and bond.” J. Struct. Eng., 126(11), 1288–1294.
Faella, C., Martinelli, E., and Nigro, E. (2002). “Steel and concrete composite beams with flexible shear connection: “Exact” analytical expression of the stiffness matrix and applications.” Comput. Struct., 80, 1001–1009.
Faella, C., Martinelli, E., and Nigro, E. (2003). “Shear connection non-linearity and deflections of steel-concrete composite beams: A simplified method.” J. Struct. Eng., 129(1), 12–20.
Hamada, S., and Longworth, J. (1976). “Ultimate strength of continuous composite beams.” J. Struct. Div. ASCE, 102(7), 1463–1478.
Hope-Gill, M. C., and Johnson, R. P. (1976). “Tests on three three-span continuous composite beams.” Proc. Inst. Civ. Eng., 61(2), 367–381.
Jasim, N. A., and Atalla, A. (1999). “Deflections of partially composite continuous beams: A simple approach.” J. Constr. Steel Res., 49, 291–301.
Johnson, R. P. (1994). Composite structures of steel and concrete: Beams, slabs, columns, and frames for buildings, Vol. 1, Blackwell Scientific, Oxford, U.K.
Johnson, R. P., and Hope-Gill, M. C. (1976). “Applicability of simple plastic theory to continuous composite beams.” Proc. Inst. Civ. Eng., 61(2), 127–143.
Newmark, N. M., Siess, C. P., and Viest, I. M. (1951). “Tests and analysis of composite beams with incomplete interaction.” Proc. Soc. Exp. Stress Anal., 9(1), 75–92.
Nie, J., and Cai, C. S. (2003). “Steel–concrete composite beams considering shear slip effects.” J. Struct. Eng., 129(4), 495–506.
Oehlers, D. J. (1990). “Methods of estimating the fatigue endurances of stud shear connectors.” Proc., P-145/90, Periodica 3/1990, IABSE, Zurich, Switzerland, 65–84.
Oehlers, D. J., and Bradford, M. A. (1999). Elementary behavior of composite steel and concrete structural members, Butterworth-Heinemann, Oxford, U.K.
Oehlers, D. J., and Seracino, R. (2002). “A tiered approach to the fatigue assessment of composite steel and concrete bridge beams.” Proc. Inst. Civ. Eng., Struct. Build., 152(3), 249–257.
Oehlers, D. J., Seracino, R., and Yeo, M. F. (2000). “Effect of friction on shear connection in composite bridge beams.” J. Bridge Eng., 5(2), 91–98.
Oven, V. A., Burgess, I. W., Plank, R. J., and Abdul Wali, A. A. (1997). “An analytical model for the analysis of composite beams with partial interaction.” Comput. Struct., 62(3), 493–504.
Plum, D. R., and Horne, M. R. (1975). “The analysis of continuous composite beams with partial interaction.” Proc. Inst. Civ. Eng., 59(2), 625–643.
Seracino, R., Oehlers, D. J., and Yeo, M. F. (2001). “Partial-interaction flexural stresses in composite steel and concrete bridge beams.” Eng. Struct., 23, 1186–1193.
Seracino, R., Oehlers, D. J., and Yeo, M. F. (2002). “Partial-interaction fatigue assessment of stud shear connectors in composite bridge beams.” Struct. Eng. Mech., 13(4), 455–464.
Singleton, W. M. (1985). “The transfer of shear in simply supported composite beams subject to fatigue loads.” MEngSc thesis, National Univ. of Ireland, Cork, Ireland.
Slutter, R. G., and Driscoll, G. C. (1965). “Flexural strength of steel-concrete composite beams.” J. Struct. Div. ASCE, 91(2), 71–99.
Yam, L. C. P., and Chapman, J. C. (1972). “The inelastic behavior of continuous composite beams of steel and concrete.” Proc. Inst. Civ. Eng., 53(2), 487–501.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Apr 8, 2003
Accepted: Dec 20, 2004
Published online: Feb 1, 2006
Published in print: Feb 2006
Notes
Note. Associate Editor: Christopher J. Earls
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.