Finite-Element Simulation and Design of Cold-Formed Steel Channels Subjected to Web Crippling
Publication: Journal of Structural Engineering
Volume 132, Issue 12
Abstract
Web crippling may occur at the highly concentrated loading or reactions when there is no end stiffener or load stiffener in cold-formed, thin-walled steel members. A nonlinear finite-element analysis is carried out based on a series of laboratory tests on cold-formed steel channels subjected to web crippling under end-one-flange and interior-one-flange loading conditions as specified in the North American and Australian/New Zealand specifications for cold-formed steel structures. Geometric and material nonlinearities were included in the finite-element analysis. The finite-element results demonstrate that the ultimate load-carrying capacity (web crippling strength), web crippling failure modes, and web deformation curves agree well with the tests. The verified finite-element models are then used for an extensive parametric study of different channel dimensions. It is found that the design strengths calculated from the North American Specification are generally unconservative for channel sections with unstiffened flanges having web slenderness ranging from 7.8 to 108.5 subjected to web crippling under the end-one-flange and interior-one-flange loading conditions. Therefore, the updated coefficients of the design formula in the North American Specification and new design formulas are subsequently proposed in this paper. It is demonstrated that the verified finite-element models provide an effective and time efficient means to predict web crippling strengths of cold-formed steel members.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Iron and Steel Institute (AISI). (1996). Specification for the design of cold-formed steel structural members, AISI, Washington, D.C.
ANSYS. (2002). User’s manual, revision 7.0, Swanson Analysis System.
Australian Standard (AS). (1991). “Methods for tensile testing of metals.” AS 1391, Standards Association of Australia, Sydney, Australia.
Australian/New Zealand Standard (AS/NZS). (1996). “Cold-formed steel structures.” AS/NZS 4600:1996, Standards Association of Australia, Sydney, Australia.
Davies, J. M. (2000). “Recent research advances in cold-formed steel structure.” J. Constr. Steel Res., 55(1-3), 267–288.
Hancock, G. J. (1998). Design of cold-formed steel structures, 3rd Ed., Australian Institute of Steel Construction, Sydney, Australia.
North American Specification (NAS). (2001). North American Specification for the design of cold-formed steel structural members, North American Cold-Formed Steel Specification, American Iron and Steel Institute, Washington, D.C.
Popovic, D., Hancock, G. J., and Rasmussen, K. J. R. (1999). “Axial compression tests of cold-formed angles.” J. Struct. Eng., 125(5), 515–523.
Tsai, M. (1992). “Reliability models of load testing.” Ph.D. thesis, Dept. of Aeronautical and Astronautical Engineering, Univ. of Illinois at Urbana-Champaign, Urbana, Ill.
Xiao, R. Y., Chin, G. P. W., and Chung, K. F. (2002). “Testing and numerical analysis of cold-formed C-sections subject to patch load.” Proc., 3rd Int. Conf. on Advances in Steel Structures, Hong Kong, 351–356.
Young, B., and Hancock, G. J. (1999). “Design of cold-formed unlipped channels subjected to web crippling.” Research Rep. No. R794, Dept. of Civil Engineering, Univ. of Sydney, Sydney, Australia.
Young, B., and Hancock, G. J. (2001). “Design of cold-formed channels subjected to web crippling.” J. Struct. Eng., 127(10), 1137–1144.
Young, B., and Yan, J. (2002). “Finite element analysis and design of fixed-ended plain channel columns.” Finite Elem. Anal. Design, 38(6), 549–566.
Yu, W. W. (2000). Cold-formed steel design, 3rd Ed., Wiley, New York.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Nov 15, 2004
Accepted: Aug 8, 2005
Published online: Dec 1, 2006
Published in print: Dec 2006
Notes
Note. Associate Editor: Donald W. White
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.