Analytical Model for Ductility Assessment of Fixed-Head Concrete Piles
Publication: Journal of Structural Engineering
Volume 131, Issue 7
Abstract
Under seismic loading, restraint provided by the anchorage of the pile reinforcement in the pile-cap of a foundation may induce a large curvature demand in the pile. For performance-based design of the foundation, the severity of local damage in the pile may be controlled by limiting the curvature ductility demand in the potential plastic hinge region of the pile. The curvature ductility demand depends on the strength and stiffness of the soil-pile system, as well as the equivalent plastic hinge length of the pile. In this paper, a kinematic model relating the displacement ductility factor to the local curvature ductility demand is proposed. The analytical model, which is amenable for a wide range of pile and soil properties, is useful for the design of fixed-head piles. The versatility of the model is illustrated using a numerical example of a reinforced concrete pile embedded in two soil types currently classified in building codes.
Get full access to this article
View all available purchase options and get full access to this article.
References
Applied Technology Council (ATC). (1996a). “Improved seismic design criteria for California bridges: Provisional recommendations.” ATC-32, Redwood City, Calif.
Applied Technology Council (ATC). (1996b). “Seismic evaluation and retrofit of concrete buildings.” ATC-40, Redwood City, Calif.
Broms, B. B. (1964). “Lateral resistance of piles in cohesionless soils.” J. Soil Mech. Found. Div., 90(3), 123–156.
Budek, A. M., Priestley, M. J. N., and Benzoni, G. (2000). “Inelastic seismic response of bridge drilled-shaft RC pile/columns.” J. Struct. Eng., 126(4), 510–517.
Chai, Y. H. (2002). “Flexural strength and ductility of extended pile shafts. I: Analytical model.” J. Struct. Eng., 128(5), 586–594.
Davisson, M. T. (1970). “Lateral load capacity of piles.” Highway Research Record, Highway Research Board, National Academy of Science, Washington, D.C., No. 333, 104–112.
Kowalsky, M. J. (2000). “Deformation limit states for circular reinforced concrete bridge columns.” J. Struct. Eng., 126(8), 869–878.
Matlock, H., and Reese, L. C. (1960). “Generalized solutions for laterally loaded piles.” J. Soil Mech. Found. Div., 86(5), 63–94.
National Earthquake Hazards Reduction Program (NEHRP). (2001). “NEHRP recommended provisions for seismic regulations for new buildings and other structures.” FEMA 368, Washington, D.C.
Prakash, S., and Sharma, H. D. (1990). Pile foundations in engineering practice, Wiley-Interscience, New York
Priestley, M. J. N., Seible, F., and Calvi, G. M. (1996). Seismic design and retrofit of bridges, Wiley-Interscience, New York
Reese, L. C., and Wang, S. T. (1997). Technical manual of documentation of computer program LPile 3.0, Ensoft, Inc., Austin, Tex.
Reese, L. C., and Van Impe, W. F. (2001). Single piles and pile groups under lateral loading, Balkema, Rotterdam, The Netherlands.
SDC. (2001). Caltrans seismic design criteria, version 1.2, California Dept. of Transportation, Sacramento, Calif.
Yang, Z. H., and Jeremic, B. (2002). “Numerical analysis of pile behaviour under lateral loads in layered elastic-plastic soils.” Int. J. Numer. Analyt. Meth. Geomech., 26(14), 1385–1406.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Dec 8, 2003
Accepted: Nov 1, 2004
Published online: Jul 1, 2005
Published in print: Jul 2005
Notes
Note. Associate Editor: Dat Duthinh
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.