Assessment of Shear Deformations on the Seismic Response of Asymmetric Shear Wall Buildings
Publication: Journal of Structural Engineering
Volume 131, Issue 11
Abstract
It is well known that shear deformations are of paramount importance in the planar two dimensional (2D) analysis of shear wall systems, both for strains and stresses, so they should be included in the analyses of such systems. Shear deformations are also included in 3D analyses of shear wall systems; however, to the writers knowledge, other writers have not previously assessed the specific impact of shear deformations on the 3D behavior of structures. This technical note presents a study where the impact of shear deformations of wall systems in the location of centers of rigidity or torsion (CTs), static eccentricities , and spatial distribution of shear forces for shear wall buildings are assessed, comparing them to the results when shear deformations are not included. It is shown that shear deformations associated with the rotational degrees of freedom of walls impact the location of CTs, , and the relative distribution of shear forces; therefore, the aspect ratio of the walls is an important variable to consider for these systems. For these systems one cannot define a geometrical locus of the elastic centers of rigidity of the floors, even for systems with the same distribution of walls in all floors.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support of Secretaría General de Obras del Gobierno del Distrito Federal, Mexico City, Mexico, is gratefully acknowledged. The critical review of Professor Juan Casillas is also acknowledged.
References
Alcocer, S. M. (1986). “Centro de torsión de edificios obtenido matricialmente.” BS thesis, Facultad de Ingeniería, UNAM, Mexico (in Spanish).
Chopra, A. K. (1995). Dynamics of structures: Theory and applications to earthquake engineering, 1st Ed., Prentice–Hall, Upper Saddle River, N.J.
Damy, J. E., and Alcocer, S. M. (1987). “Obtención del centro de torsión de edificios.” Proc., 6th Congreso Nacional de Ingeniería Estructural, Querétaro, México, C-60–C-67 (in Spanish).
Goel, R. K., and Chopra, A. K. (1993). “Seismic code analysis of buildings without locating centers of rigidity.” J. Struct. Eng., 119(10), 3039–3055.
Harasimowicz, A. P., and Goel, R. K. (1998). “Seismic code analysis of multi-story asymmetric buildings.” Earthquake Eng. Struct. Dyn., 127, 173–185.
Kan, C. L., and Chopra, A. K. (1977). “Elastic earthquake analysis of torsionally coupled multistory buildings.” Earthquake Eng. Struct. Dyn., 5, 395–412.
Makarios, T., and Anastassiadis, K. (1998). “Real and fictitious elastic axes of multi-story buildings: Theory.” Struct. Des. Tall Build., 7, 33–55.
Nadjai, A., and Johnson, D. (1998). “Torsion in tall buildings by a discrete force method.” Struct. Des. Tall Build., 7, 217–231.
Newmark, N. M., and Rosenblueth, E. (1971). Fundamentals of earthquake engineering, 1st Ed., Prentice Hall, Englewood Cliffs, N.J.
Normas Técnicas Complementarias para Diseño por Sismo (NCTS). (2004). Gaceta del Gobierno del Distrito Federal. NCTS-2004, Mexico (in Spanish).
Paulay, T. (1998). “Torsional mechanisms in ductile building systems.” Earthquake Eng. Struct. Dyn., 27, 1101–1121.
Schwaighofer, J., and Microys, H. F. (1969). “Analysis of shear walls using standard computer programs.” ACI J., 66(12), 1005–1007.
Tena-Colunga, A., and Pérez-Osornio, M. A. (2000). “Importancia de las deformaciones por cortante en la ubicación de los centros de torsión de entrepiso en edificios estructurados con base en muros.” Proc., 12th Congreso Nacional de Ingeniería Estructural (CD Rom), León, México, 15–15 (in Spanish).
Tena-Colunga, A., and Pérez-Osornio, M. A. (2002). “Impact of shear deformations on the location of the centers of torsion of shear wall buildings.” Proc., 7th US National Conf. on Earthquake Engineering (7NCEE) (CD Rom), Boston, No. 193.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jul 10, 2003
Accepted: Jan 11, 2005
Published online: Nov 1, 2005
Published in print: Nov 2005
Notes
Note. Associate Editor: Vinay Kumar Gupta
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.