Bond-Slip in Reinforced Concrete Elements
Publication: Journal of Structural Engineering
Volume 131, Issue 11
Abstract
A model for fiber reinforced composites that takes into account the fiber slipping is presented in this paper and applied to the analysis of reinforced concrete elements. The model is formulated within the framework of the plasticity theory and the mixtures theory, considering two phases corresponding to the matrix (concrete) and the fibers (reinforcing bars) and modifying the behavior of the last to take into account the relative displacement between the two phases. An elasto-plastic interface model developed by other writers is used to describe the bond–slip mechanism. The resulting model is attractive for the analysis of reinforced concrete problems at the macrostructural level since the explicit discretization of reinforcing bars and interface is not required, with the consequent computational cost reduction. The paper concludes with application examples and comparisons with experimental results of reinforced concrete elements that show the capacity of the model developed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support of CONICET and National University of Tucumán is gratefully acknowledged. Special acknowledgement is extended to Ms. Amelia Campos for the English revision.
References
Ayoub, A., and Fillippou, F. (1999). “Mixed formulation of bond-slip problems under cyclic loads.” J. Struct. Eng., 125(6), 661–671.
Bresler, B., and Bertero, V. (1968). “Behavior of reinforced concrete under repeated load.” J. Struct. Div. ASCE, 94(6), 1567–1590.
Ciampi, V., Eligehausen, R., Bertero, V., and Popov, E. (1982). “Analytical model for concrete anchorages of reinforcing bars under generalized excitations.” Rep. No. UCB/EERC-82/23, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Car, E. (2000). “Modelo constitutivo continuo para el estudio del comportamiento mecánico de los materiales compuestos.” PhD thesis, Univ. Politécnica de Cataluña, Barcelona, Spain.
Chaboche, J. L., Girard, R., and Schaff, A. (1997). “Numerical analysis of composite systems by using interphase/interphace models.” Comput. Mech., 20, 3–11.
Cox, J. V., and Herrmann, L. (1998). “Development of a plasticity bond model for steel reinforcement.” Mech. Cohesive-Frict. Mater., 3, 155–180.
Cox, J. V., and Yu, H. (1999). “A micromechanical analysis of the radial clastic response associated with slender reinforcing elements within a matrix.” J. Compos. Mater., 33(23), 16–26.
Eligehausen, R., Bertero, V., and Popov, E. P. (1983). “Local bond-slip relationships of deformed bars under generalized excitations.” Rep. No UCB/EERC 83-19, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Gambarova, P. G., Rosati, G. P., and Zasso, B. (1989). “Steel-to-concrete bond after concrete splitting test results.” Mater. Struct., 22(127), 35–47.
Ghandehari, M., Krishnaswamy, S., and Shah, S. (1999). “Technique for evaluating kinematics between rebar and concrete.” J. Eng. Mech., 125(2), 234–241.
Guo, J., and Cox, J. V. (2000). “An interfacial model for the mechanical interaction between frp bars and concrete.” J. Reinf. Plast. Compos., 19(1), 15–34.
Kent, D. C., and Park, R. (1971). “Flexural members with confined concrete.” J. Struct. Div. ASCE, 97(7), 1969–1990.
Low, S. S., and Moehle, J. P. (1987). “Experimental study of reinforced concrete columns subjected to multi-axial cyclic loading.” EERC Rep. No. 87/14, Earthquake Engineering Research Center, Univ. of California, Berkely, Calif.
Luccioni, B., and López, D. (2002). “Modelo para materiales compuestos con deslizamiento de fibras.” Análisis y cálculo de estructuras de materiales compuestos, S. Oller, ed., CIME, Barcelona, Spain, 411–431.
Ma, S. Y., Bertero V., and Popov, E. P. (1976). ”Experimental and analytical studies on the hysteretic behavior of reinforced concrete rectangular and t-beams.” Rep. No. EERC 79-22, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Malvar, L. J. (1992). “Bond of reinforcement under controlled confinement.” ACI Mater. J., 89(6), 593–601.
Maugin, G. A. (1992). The thermomechanics of plasticity and fracture, Cambridge University Press, Cambridge, U.K.
Menegotto, M., and Pinto, P. E. (1973). “Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and inelastic behavior of elements under combined normal force and bending.” Final Rep., Proc., IABSE Symp. on Resistance and Ultimate Deformability of Structures Acted on Well Defined Repeated Loads, Lisboa, Portugal.
Monti, G., and Spacone, E. (2000). “Reinforced concrete fiber beam with bond-slip.” J. Struct. Eng., 126(6), 654–661.
Pijaudier-Cabot, G., Mazars, J., and Pulikowski, J. (1991). “Steel-concrete bond analysis with nonlocal continuous damage.” J. Struct. Eng., 117(3), 862–882.
Salari, M., and Spacone, E. (2001). “Finite element formulation of one-dimensional elements with bond-slip.” Eng. Struct., 23, 815–826.
Soh, C., Chiew, S. P., and Dong, Y. X. (1999). “Damage model for concrete-steel interface.” J. Eng. Mech., 125(8), 979–983.
Spacone, E., and Limkatanyu, S. (2000). “Response of reinforced concrete members including bond-slip effects.” ACI Struct. J., 97(6), 831–839.
Takeda, T., Sozen, M. and Nielsen, N. N. (1970). “Reinforced concrete response to simulated earthquake.” J. Struct. Div. ASCE, 96(12), 2557–2573.
Truesdell, C., and Toupin, R. (1960). The classical field theories, Handbuch der Physik II/I, S. Flugge, ed., Springer, Berlin.
Zienkiewicz, O. C., and Taylor, R. L. (2000). Finite element method: Volume 1, The basis, 5th Ed., Butterworth Heinemann—CIMNE (International Center for Numerical Methods in Engineering), Barcelona, Spain.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Oct 18, 2002
Accepted: May 16, 2005
Published online: Nov 1, 2005
Published in print: Nov 2005
Notes
Note. Associate Editor: Enrico Spacone
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.