Interaction Model for Unprotected Concrete Filled Steel Columns Under Standard Fire Conditions
Publication: Journal of Structural Engineering
Volume 130, Issue 9
Abstract
This paper extends the Rankine method to the analyses of reinforced concrete filled steel (RCFS) columns and plain concrete filled steel (PCFS) columns at elevated temperature. The advantage of this approach is that it gives structural engineers a physical feel of the adequacy of a column in terms of its plastic squashing capacity and elastic buckling capacity. The method hinges on the concept of modified buckling coefficient, which is equally applicable for both axially and eccentrically loaded columns. A novel feature is that the fire resistance of a column is expressed in terms of its plastic squashing capacity and elastic buckling capacity at ambient temperature. The mean of agreement between the Rankine predictions and test results for both RCFS (61 columns) and PCFS (95 columns) is satisfactory. The paper includes a worked example to illustrate the flexibility of the approach, and also comments on the accuracy when the Rankine method is applied to other types of columns such as steel or reinforced concrete columns.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Society for Testing and Materials (ASTM). (1995). “Standard methods of fire tests of building construction and materials.” ASTM-E119, Philadelphia.
Chabot, M., and Lie, T. T. (1992). “Experimental studies on the fire resistance of hollow steel columns filled with bar-reinforced concrete.” Internal Rep. No. 628, National Research Council Canada, Canada.
Dotreppe, J. C., Franssen, J. M., and Vanderzeypen, Y.(1999). “Calculation method for design of reinforced concrete columns under fire conditions.” ACI Struct. J., 96(1), 9–18.
ECCS-TC3. (1988). Calculation of the fire resistance of centrally loaded composite steel-concrete columns exposed to the standard fire, Elsevier, New York.
Franssen, J. M., Schleich, J. C., Cajot, L. G., and Azpiazu, W.(1996). “A simple model for the fire resistance of axially loaded members—comparison with experimental results.” J. Constr. Steel Res., 37, 175–204.
Grandjean, G., Grimault, J. P., and Petit, L. (1981). “Determination de la durée au feu des profils creux remplis de béton.” Rapport Final. Commission des Communautés Européennes, Recherche Technique acier, Luxembourg (in French).
Guyaux, P., and Janss, J. (1979). “Comportement au flambement des tubes en acier remplis de Béton.” C.R.I.F., MT 65.
Hass, R. (1986). “Practical rules for the design of reinforced concrete and composite columns submitted to fire.” Technical Rep. No. 69, Institute für Baustoffe, Massivbau und Brandschutz der Technischen Univ. Braunschweig, Braunschweig, Germany (in German).
Kordina, K., and Klingsch, W. (1983). “Fire resistance of composite columns of concrete filled hollow sections.” Research Rep. No. CIDECT 15 C1/C2-83/27 (part of C.E.C. 7210-SA/108, Studiengesellschaft P. 35).
Lie, T. T., and Chabot, M. (1992). “Experimental studies on the fire resistance of hollow steel columns filled with plain concrete.” Internal Rep. No. 611, National Research Council Canada, Canada.
Lie, T. T., and Stringer, D. C.(1994). “Calculation of the fire resistance of steel hollow structural section columns filled with plain concrete.” Can. J. Civ. Eng., 21, 382–385.
Nilson, A. H., and Winter, G. (1991). Design of concrete structures, 11th Ed., McGraw-Hill, New York.
Tan, K. H., and Tang, C. Y. (2002). “Interaction formula for reinforced concrete columns under fire conditions.” ACI Struct. J., in press.
Tang, C. Y. (2002). “An interactive formula for fire resistance of columns.” MEng thesis, School of Civil & Environmental Engineering, Nanyang Technological Univ., Singapore.
Tang, C. Y., and Tan, K. H.(2001). “Basis and application of simple interaction formula for steel frames under fire conditions.” J. Struct. Eng., 127(10), 1214–1220.
Tang, C. Y., Tan, K. H., and Ting, S. K.(2001). “Basis and application of a simple interaction formula for steel columns under fire conditions.” J. Struct. Eng., 127(10), 1206–1213.
Toh, W. S., Tan, K. H., and Fung, T. C.(2000). “Compressive resistance of steel columns in fire: Rankine approach.” J. Struct. Eng., 126(3), 398–405.
Toh, W. S., Tan, K. H., and Fung, T. C.(2001). “Strength and stability of steel frames in fire: Rankine approach.” J. Struct. Eng., 127(4), 461–469.
Wang, Y. C.(1999). “Tests on slender composite columns.” J. Constr. Steel Res., 49, 25–41.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Aug 13, 2002
Accepted: Oct 28, 2003
Published online: Aug 16, 2004
Published in print: Sep 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.