Analysis of the Influence of Tensile Strength on the Stability of Eccentrically Compressed Slender Unreinforced Masonry Walls Under Lateral Loads
Publication: Journal of Structural Engineering
Volume 130, Issue 6
Abstract
A comprehensive finite element model is presented for the combined material and geometric nonlinear analysis of slender unreinforced masonry walls, with the capability of capturing postcracking and postbuckling behavior. Material tensile strength is taken into consideration; an exponential stress-strain relationship is adopted for the compressive region and its smooth linear extension is used for the tensile region. This model is applicable under different load combinations (concentrated and distributed lateral loads, vertical load with eccentricity, as well as self-weight) and different restraint conditions. Numerical results of the model show good agreement with experimental results, as well as with analytical results in published technical papers.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bonet, J., and Wood, R. D. (1999). Nonlinear continuum mechanics for finite element analysis, Cambridge University Press, Cambridge, England.
Frisch-Fay, R.(1975). “Stability of masonry piers.” Int. J. Solids Struct., 11(2), 187–198.
Ganduscio, S., and Romano, F.(1997). “FEM and analytical solutions for buckling of nonlinear masonry members.” J. Struct. Eng., 123(1), 104–111.
Kim, Y. S., and Bennett, R. M.(2002). “Flexural tension in unreinforced masonry: Evaluation of current specifications.” TMS J.,20(1), 23–30.
La Mendola, L.(1997). “Influence of nonlinear constitutive law on masonry pier stability.” J. Struct. Eng., 123(10), 1303–1311.
La Mendola, L., and Papia, M.(1993). “Stability of masonry piers under their own weight and eccentric load.” J. Struct. Eng., 119(6), 1678–1693.
La Mendola, L., Papia, M., and Zingone, G.(1995). “Stability of masonry walls subjected to seismic transverse forces.” J. Struct. Eng., 121(11), 1581–1587.
Masonry Standards Joint Committee (2002). “Building code requirements for masonry structures.” ACI 530-02, ASCE 5-02, TMS 402-02.
Naraine, K., and Sinha, S.(1989). “Behavior of brick masonry under cyclic compressive loading.” J. Struct. Eng., 115(6), 1432–1445.
Payne, D. C., Brooks, D. S., and Sved, G.(1990). “The analysis and design of slender brick walls.” Masonry Int.,4(2), 55–65.
Romano, F., Ganduscio, S., and Zingone, G.(1992). “Stability of masonry with nonlinear stress-strain relationship.” Masonry Int.,6(2), 69–74.
Romano, F., Ganduscio, S., and Zingone, G.(1993). “Cracked nonlinear masonry stability under vertical and lateral loads.” J. Struct. Eng., 119(1), 69–87.
Sahlin, S. (1971). Structural masonry, Prentice-Hall, Englewood Cliffs, N.J.
Schultz, A., Bean, J., Lu, M., Stolarski, H., and Ojard, N. (2002). “Interaction of slenderness and lateral loading in URM walls.” Proc., 6th Int. Masonry Conf., London, England.
Schultz, A. E., Mueffelman, J. G., and Ojard, N. J. (2000). “Critical axial loads for transversely loaded masonry walls.” Department of Civil Engineering, University of Minnesota, Minneapolis.
Stolarski, H., Belytschko, T., and Carpenter, N.(1983). “Bending and shear mode decomposition in structural elements.” J. Struct. Mech., 11(2), 153–176.
Tesfaye, E., and Broome, T. H.(1977). “Effect of weight on stability of masonry walls.” J. Struct. Div. ASCE, 103(5), 961–970.
Wolde-Tinsae, A., Atkinson, R. H., and Hamid, A. A. (1993). “State-of-the-art modulus of elasticity of masonry.” Proc., 6th North American Masonry Conf., TMS, 1209–1220.
Yokel, F. Y.(1971). “Stability and load capacity of members with no tensile strength.” J. Struct. Div. ASCE, 97(7), 1913–1926.
Zhugh, Y., Thombiratnam, D., and Corderoy, J.(1998). “Nonlinear dynamic analysis of unreinforced masonry.” J. Struct. Eng., 124(3), 270–277.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Dec 27, 2001
Accepted: Jul 30, 2003
Published online: May 14, 2004
Published in print: Jun 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.