Postbuckling Behavior of Axially Restrained and Axially Loaded Steel Columns under Fire Conditions
Publication: Journal of Structural Engineering
Volume 130, Issue 3
Abstract
This paper presents the results of a theoretical study of the postbuckling behavior of an axially loaded steel column at elevated temperatures whose thermal expansion is restrained by the adjacent structural members. This study investigates the effects on the column failure temperature by various factors, including the restraint stiffness during the column loading (expansion) and unloading (contraction) phases, column slenderness, and the initially applied column load ratio. The column failure temperature is defined as the temperature at which the load in the column during the postbuckling phase returns to its initial load. Results of this study indicate that the column failure temperature can be much higher than that of the column at first buckling and the higher the column slenderness, the larger the difference between temperatures of column failure and first buckling. Consequently, the column postbuckling behavior should be considered. Nevertheless, for columns with light restraints (restraint stiffness to column stiffness less than 5%) or high load ratios (load ratio higher than 0.5), the failure temperature of the column with realistic unloading stiffness of the restraint is only slightly affected by the postbuckling behavior.
Get full access to this article
View all available purchase options and get full access to this article.
References
British Standards Institution (BSI). (1990). “Part 1: Code of practice for design in simple and continuous construction: Hot rolled sections.” British Standard BS 5950: Structural use of steelwork in buildings.
Building Research Establishment (BRE). (1996). Proc., 2nd Cardington Conf., Bedford, England.
Centre Technique Industrial de la Construction Metallique (CTICM). (1982). Methode de prevision par le calcul du comportement au feu des structures en acier, Document Technique Unifie, Construction Metallique, No. 3.
Correia Rodrigues, J. P., Cabrita Neves, I., and Valente, J. C.(2000). “Experimental research on the critical temperature of compressed steel elements with restrained thermal elongation.” Fire Saf. J., 35, 77–98.
European Committee for Standardization (CEN). (2000). Eurocode 3: Design of steel structures, Part 1.2: General rules, structural fire design.
Franssen, J. M.(2000). “Failure temperature of a system comprising a restrained column submitted to fire.” Fire Saf. J., 34, 191–207.
Simms, W. I., O’Conner, D. J., Ali, F., and Randall, M.(1995–96). “An experimental investigation on the structural performance of steel columns subjected to elevated temperatures.” J. Appl. Fire Sci., 5(4), 269–284.
Talamona, D., Franssen, J. M., Schleich, J. B., and Kruppa, J.(1997). “Stability of steel columns in case of fire: numerical modelling.” J. Struct. Eng., 123(6), 713–720.
Wang, Y. C.(1997). “The effects of frame continuity on the behaviour of steel columns under fire conditions and fire resistant design proposals.” J. Constr. Steel Res., 41(1), 93–111.
Wang, Y. C., and Moore, D. B. (1994a). “The effect of frame continuity on the critical temperature of steel columns.” Proc., 3rd Kenrensky Conf. on Global Trends in Structural Engineering, Singapore, 681–686.
Wang, Y. C., and Moore, D. B. (1994b). “Effect of thermal restraint on column behaviour in a frame.” Proc., 4th Int. Symp. on Fire Safety Science, T. Kashiwagi, ed., Ottawa, 1055–1066.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Oct 16, 2001
Accepted: Mar 24, 2003
Published online: Feb 19, 2004
Published in print: Mar 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.