Tests of Unstiffened Plate Elements Under Combined Compression and Bending
Publication: Journal of Structural Engineering
Volume 130, Issue 10
Abstract
Details of a dual-actuator rig developed for testing rectangular plates simply supported on three sides, with the remaining (longitudinal) edge free, under combined uniaxial compression and in-plane bending are presented. Particular attention is given to ensuring a constant strain eccentricity to the loaded ends, as opposed to a constant load eccentricity, in order to determine the postbuckling behavior and ultimate load and moment capacities of unstiffened thin-walled elements. Strain gradients varying from pure compression to pure bending are facilitated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Iron and Steel Institute. (AISI). ( 2001). Specification for the design of cold-formed steel structural members, Washington, D.C.
2.
Australian/New Zealand Standard. ( 1996). “Cold-formed steel structures.” AS/NZS 4600, Sydney, Australia.
3.
Bambach, M.R., and Rasmussen, K.J. R. ( 2001). “Effects of anchoring tensile stresses in axially loaded plates and sections.” Third Int. Conf. on Thin-Walled Structures, Cracow, Poland, Elsevier, New York, 729–739.
4.
Bambach, M.R., and Rasmussen, K.J. R. ( 2002). “Tests of unstiffened plate elements under combined compression and bending.” Research Rep. R818, Dept. of Civil Engineering, Univ. of Sydney, Sydney, Australia, available at 〈http://www.civil.usyd.edu.au/publications〉.
5.
Bambach, M.R., and Rasmussen, K.J. R. ( 2004a). “Design provisions for sections containing unstiffened elements with stress gradient.” J. Struct. Eng., 130(10), 1620–1628.
6.
Bambach, M.R., and Rasmussen, K.J. R. ( 2004b). “Effective widths of unstiffened elements with stress gradient.” J. Struct. Eng., 130(10), 1611–1619.
7.
Beale, R. G., Godley, M. H. R., and Enjily, V. (2001). “A theoretical and experimental investigation into cold-formed channel sections in bending with the unstiffened flanges in compression.” Comput. Struct., 79, 2403–2411.
8.
Bulson, P.S. ( 1970). The stability of flat plates, Chatto and Windus, London.
9.
Chick, C. G., and Rasmussen, K. J. R. (1999). “Thin-walled beam-columns. 2: Proportional loading tests.” J. Struct. Eng., 125(11), 1267–1276.
10.
Moxham, K.E. ( 1971). “Buckling tests on individual welded steel plates in compression.” Rep. CUED/C-Struct/TR.3, Univ. of Cambridge.
11.
Rasmussen, K. J. R. (1994). “Design of thin-walled columns with unstiffened flanges.” Eng. Struct., 16(5), 307–316
12.
Rhodes, J. ( 2000). “Buckling of thin plates and thin-plate members.” Structural failure and plasticity, IMPLAST 2000, Elselvier, New York.
13.
Rhodes, J., Harvey, J. M., and Fok, W. C. (1975). “The load-carrying capacity of initially imperfect eccentrically loaded plates.” Int. J. Mech. Sci., 17, 161–175.
14.
Rusch, A., and Lindner, J. (2001). “Remarks to the direct strength method.” Thin-Walled Struct., 39, 807–820.
15.
Yiu, F., and Pekoz, T. ( 2001). “Design of cold-formed steel plain channels.” Final Rep., Cornell Univ., Ithaca, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 ASCE.
History
Published online: Oct 1, 2004
Published in print: Oct 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.