Cracked Membrane Model: Finite Element Implementation
Publication: Journal of Structural Engineering
Volume 129, Issue 9
Abstract
In this paper, the cracked membrane model is developed into a finite element formulation for the analysis of orthogonally reinforced structural elements in plane stress (such as deep beams and walls). The cracked membrane model falls into the category of “compression field models” combining elemental components from the modified compression field approach with those of the tension chord model. The tension stiffening effect is modeled using a stepped, rigid-plastic steel–concrete bond relationship. The tension stiffening and tension softening components of the concrete tension resistance mechanism are decoupled. As equilibrium is fully satisfied at the cracks and not expressed in terms of average stresses across the element, the link to limit analysis is maintained. The model has been incorporated into a finite element program for the analysis of reinforced concrete structures with verification against experimental data presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
Attard, M. M., Nguyen, D. M., and Foster, S. J.(1996). “Finite element analysis of out of plane buckling of reinforced concrete walls.” Int. J. Comput. Struct., 61(6), 1037–1042.
Belarbi, A., and Hsu, T. T. C. (1991). “Constitutive laws of reinforced concrete in biaxial tension compression.” Research Rep. No. UHCEE 91-2, Dept. of Civil Engineering, Univ. of Houston, Houston.
Belarbi, A., and Hsu, T. T. C.(1995). “Constitutive laws of softened concrete in biaxial tension compression.” ACI Struct. J., 92(5), 562–573.
Collins, M. P., and Porasz, A. (1989). “Shear strength for high strength concrete.” Bull. No. 193, Design Aspects of High Strength Concrete, Comité Euro-International du Béton, 75–83.
Darwin, D., and Pecknold, D. A.(1977). “Nonlinear biaxial stress-strain law for concrete.” J. Eng. Mech. Div., Am. Soc. Civ. Eng., 103(2), 229–241.
Filippou, F. C., Popov, E. P., and Bertero, V. V. (1983). “Effects of bond deterioration on hysteretic behaviour of reinforced concrete joints.” Rep. No. UCB/EERC.83/19, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Foster, S. J.(1992). “An application of the arc length method involving concrete cracking.” Int. J. Numer. Methods Eng., 33(2), 269–285.
Foster, S. J., and Gilbert, R. I. (1990). “Non-linear finite element model for reinforced concrete deep beams and panels.” UNICIV Rep. No. R-275, School of Civil Engineering, Univ. of New South Wales, Kensington, U.K.
Foster, S. J., and Marti, P. (2002). “FE modelling of RC membranes using the CMM formulation.” Proc., 5th World Congress on Computational Mechanics (WCCM V), Vienna, Austria, H. A. Mang, F. G. Rammerstorfer, and J. Eberhardsteiner, eds., Vienna Univ. of Technology, Austria 〈http://wccm.tuwien.ac.at〉
Hillerborg, A., Modeer, M., and Petersson, P. E.(1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cem. Concr. Res., 6, 773–782.
Kaufmann, W. (1998). “Strength and deformations of structural concrete subjected to in-plane shear and normal forces.” Rep. No. 234, Institute of Structural Engineering, ETH, Zürich, Switzerland.
Kaufmann, W., and Marti, P.(1998). “Structural concrete: Cracked membrane model.” J. Struct. Eng., 124(12), 1467–1475.
Kupfer, H., Hilsdorf, H. K., and Rüsch, H.(1969). “Behaviour of concrete under biaxial stresses.” ACI J., 66(8), 656–666.
Leonhardt, F., and Walther, R. (1966). “Wandartige Träger.” Bull No. 178, Wilhelm Ernst and Sohn, Berlin.
Marti, P., Alvarez, M., Kaufmann, W., and Sigrist, V.(1998). “Tension chord model for structural concrete.” Struct. Eng. Int. (IABSE, Zurich, Switzerland), 4(98), 287–298.
Marti, P., Sigrist, V., and Alvarez, M. (1997). “Mindestbewehrung von Betonbauten.” Schlussbericht, Forschungsauftrag Nr. 82/95, des Bundesamts für Strassenbau.
Meyboom, J. (1987). “An experimental investigation of partially prestressed, orthogonally reinforced concrete elements subjected to membrane shear.” Dept. of Civil Engineering, Univ. of Toronto, Toronto.
Miyakawa, T., Kawakami, T., and Maekawa, K.(1987). “Nonlinear behavior of cracked reinforced concrete plate element under uniaxial compression.” Proc., JSCE, 378, 249–258.
Pang, X. B., and Hsu, T. T. C. (1992). “Constitutive laws of reinforced concrete in shear.” Research Rep. No. UHCEE92-1, Dept. of Civil Engineering, Univ. of Houston, Houston.
Paulay, T.(1971). “Coupling beams of reinforced concrete shear walls.” J. Struct. Div. ASCE, 97(3), 843–862.
Petersson, P. E. (1981). “Crack growth and development of fracture zone in plain concrete and similar materials.” Rep. No. TVBM-1006, Lund Institute of Technology, Lund, Sweden.
Robinson, J. R., and Demorieux, J.-M. (1977). “Essais de modèles d’a⁁me de poutre en double té.” Annales de l’Institut Technique du Ba⁁timent et des Traveaux Publics, No. 354, October, Serie: Beton No. 172, 77–95.
Thorenfeldt, E., Tomaszewicz, A., and Jensen, J. J. (1987). “Mechanical properties of high strength concrete and application in design.” Proc., International Symposium on Utilization of High Strength Concrete, Stavanger, Norway, 149–159.
Vecchio, F. J.(2000a). “Disturbed stress field model for reinforced concrete: formulation.” J. Struct. Eng., 126(9), 1070–1077.
Vecchio, F. J.(2000b). “Analysis of shear critical reinforced concrete beams.” ACI Struct. J., 97(1), 102–110.
Vecchio, F. J., and Collins, M. P. (1982). “The response of reinforced concrete to in-plane shear and normal stresses.” Dept. of Civil Engineering, Univ. of Toronto, Toronto.
Vecchio, F. J., and Collins, M. P.(1986). “The modified compression field theory for reinforced concrete elements subjected to shear.” ACI J., 83(2), 219–231.
Vecchio, F. J., and Collins, M. P.(1993). “Compression response of cracked reinforced concrete.” J. Struct. Eng., 119(12), 3590–3610.
Zhang, L. X. (1992). “Constitutive laws of reinforced elements with medium-high strength concrete.” PhD thesis, Univ. of Houston, Houston.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Jan 31, 2002
Accepted: Dec 6, 2002
Published online: Aug 15, 2003
Published in print: Sep 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.