Seismic Retrofit of Shear Walls with Headed Bars and Carbon Fiber Wrap
Publication: Journal of Structural Engineering
Volume 129, Issue 5
Abstract
A series of four shear wall specimens was tested in order to evaluate the seismic retrofit that had been proposed for the core wall of an existing building. The core wall had nonductile reinforcing details, including lap splices in the longitudinal reinforcement in potential plastic hinging regions, inadequate confinement of boundary regions, and inadequate anchorage of the transverse reinforcement. The seismic retrofit involved the use of headed reinforcement, carbon fiber wrap, and reinforced concrete collars at the base of the wall. The four shear wall specimens were tested under reversed cyclic loading. Two of these walls had a lap splice in the longitudinal steel at the base of the wall, and the other two had a lap splice 600 mm from the base of the wall. One of each of these specimens was tested in the as-built condition and the other two were retrofit prior to testing. The test results show that the retrofit strategies were successful in improving the ductility and energy dissipation of the shear walls.
Get full access to this article
View all available purchase options and get full access to this article.
References
Berner, D., Dahlgren, T., and Dahl, K. (1999). “Design and detailing with headed reinforcement for seismically resistant concrete bridge structures.” ACI SP-184, Development of Seismic Steel Products and Systems, ACI, Detroit, 23–43.
Griezic, A., Cook, W. D., and Mitchell, D. (1996). “Seismic retrofit of bridge column-footing connections.” Proc., 11th World Conf. on Earthquake Engineering (CD-ROM), Paper No. 508, 1–8, International Association for Earthquake Engineering, Acapulco.
Mar, D., et al. (2000). “Performance-based seismic upgrade of a 14-story suspended slab building using state-of-the-art analysis and construction techniques.” Proc., 69th Annual Structural Engineers Assoc. of California Convention, SEAOC, Oakland, Calif., 1–12.
Pantelides, C. P., Gergely, J., Reaveley, L. D., and Volnyy, V. A.(1999). “Retrofit of RC bridge pier with CFRP advanced composites.” J. Struct. Eng., 125(10), 1094–1099.
Park, R.(1989). “Evaluation of ductility of structures and structural assemblages from laboratory testing.” Bull. New Zealand Nat. Soc. for Earthquake Eng., 22(3), 155–166.
Priestley, M. J. N., Seible, F., and Calvi, G. M. (1996). Seismic design and retrofit of bridges, Wiley, New York.
Seible, F., Priestley, M. J. N., Hegemier, G. A., and Innamorato, D.(1997). “Seismic retrofit of RC columns with continuous carbon fiber jackets.” J. Compos. Constr., 1(2), 52–62.
“Tyfo® SCH-35 Composite.” (2000). 〈http://www.fyfeco.com/SCH-35%20comp.pdf〉 (Aug. 13, 2001).
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Oct 16, 2001
Accepted: Aug 16, 2002
Published online: Apr 15, 2003
Published in print: May 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.