Longitudinal Plate and Through Plate-to-Hollow Structural Section Welded Connections
Publication: Journal of Structural Engineering
Volume 129, Issue 4
Abstract
A longitudinal branch plate-to-rectangular hollow structural section (HSS) member connection tends to cause excessive distortion of the HSS connecting face. Such a connection therefore results in a relatively low, deformation limit state, design resistance. A “through” branch plate connection that extends through both walls of the rectangular HSS member can be used to increase the design resistance of a standard longitudinal branch plate connection. The results of an experimental test program and a corresponding numerical study, using the finite-element method on longitudinal and corresponding through branch plate-to-HSS connections are presented in this paper. The strength and behavior of longitudinal versus through branch plate-to-HSS connections is henceforth determined and a unified limit states design (LRFD) procedure for these cognate connections is proposed.
Get full access to this article
View all available purchase options and get full access to this article.
References
AISC. (1997). “Hollow structural sections connections manual.” American Institute of Steel Construction, Chicago.
Canadian Standards Association (CAN/CSA)-G40.20/G40.21-98. (1998a). “General requirements for rolled or welded structural quality steel.” Canadian Standards Association, Toronto.
CAN/CSA-G312.3-98 (1998b). “Metric dimensions of structural steel shapes and hollow structural sections.” Canadian Standards Association, Toronto.
Cao, J. J., Packer, J. A., and Kosteski, N.(1998a). “Design guidelines for longitudinal plate to HSS connections.” J. Struct. Eng., 124(7), 784–791.
Cao, J. J., Packer, J. A., and Yang, G. J.(1998b). “Yield line analysis of RHS connections with axial loads.” J. Constr. Steel Res., 48, 1–25.
International Institute of Welding (IIW). (1989). “Design recommendations for hollow section joints—predominantly statically loaded.” IIWDoc. XV-701-89, 2nd Ed., IIW Subcommission XV-E, Helsinki, Finland.
Jubb, J. E. M., and Redwood, R. G. (1966). “Design of joints to box sections.” Conf. on Industrial Building and the Structural Engineer, Institution of Structural Engineers, U.K.
Lu, L. H., de Winkel, G. D., Yu, Y., and Wardenier, J. (1994). “Deforma-tion limit for the ultimate strength of hollow section joints.” Proc., 6th Int. Symposium on Tubular Structures, Melbourne, Australia, 341–347.
Packer, J. A., and Henderson, J. E. (1997). Hollow structural section connections and trusses—A design guide, 2nd Ed., Canadian Institute of Steel Construction, Toronto.
Sherman, D. R.(1996). “Designing with structural tubing.” Eng. J., 33(3), 101–109.
Swanson Analysis Systems. (1998a). ANSYS release 5.5, Houston.
Swanson Analysis Systems. (1998b). Structural analysis guide, 4th Ed., Houston.
Zhao, X. L. (1996). “Verification of the deformation limit for T-joints in cold-formed RHS sections.” Proc., 7th Int. Symposium on Tubular Structures, Miskolc, Hungary, 213–220.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Dec 12, 2001
Accepted: Jun 4, 2002
Published online: Mar 14, 2003
Published in print: Apr 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.