Local Buckling Tests on Cold-Formed Steel Beams
Publication: Journal of Structural Engineering
Volume 129, Issue 12
Abstract
C and Z sections are two of the most common cold-formed steel shapes in use today. Accurate prediction of the bending performance of these sections is important for reliable and efficient cold-formed steel structures. Recent analytical work has highlighted discontinuities and inconsistencies in the American Iron and Steel Institute (AISI) and Canadian Standards Association (S136) design provisions for stiffened elements under a stress gradient (i.e., the web of C or Z sections). New methods have been proposed for design, and an interim method has been adopted in the North American Specification (NAS). However, existing tests on C and Z sections do not provide a definitive evaluation of the design expressions, due primarily to incomplete restriction of the distortional buckling mode. Described in this paper is a series of flexural tests with details selected specifically to insure that local buckling is free to form, but distortional buckling and lateral-torsional buckling are restricted. The members selected for the tests provide systematic variation in the web slenderness while varying other relevant nondimensional parameters (i.e., Initial analysis of the completed testing indicates that overall test-to-predicted ratios for AISI, S136, NAS, and the direct strength method are all adequate, but systematic differences are observed.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Iron Steel Institute (AISI). (1996). “Specification for the design of cold-formed steel structural members.” American Iron and Steel Institute. Washington, D.C.
American Society for Testing and Materials (ASTM). (2000). “E8-00, Standard test methods for tension testing of metallic material.” E8-00, American Society for Testing and Materials, Philadelphia, Pa.
Canadian Standards Association (1994). “Cold-formed steel structural members.” S136-94, Canadian Standards Association, Rexdale, Ont.
Elhouar, S., and Murray, T. M. (1985). “Adequacy of proposed AISI effective width specification provisions for Z- and C-purlin design.” Fears Structural Engineering Laboratory, FSEL/MBMA 85-04, University of Oklahoma, Norman, Okla.
HKS. (2001). ABAQUS Version 5.2., Hibbitt, Karlsson, and Sorensen, Inc., Pawtucket, R.I. 〈www.hks.com〉 (March 2002).
North American Specification (NAS). (2001). “North American specification for the design of cold-formed steel structural members.” American Iron and Steel Institute, Washington, D.C.
Schafer, B. W. (2001). “CUFSM 2.5—Elastic buckling analysis of thin-walled members using the classical finite strip method: Users manual and tutorials.” 〈www.ce.jhu.edu/bschafer/cufsm〉 (March 2002).
Schafer, B. W.(2002a). “Local, distortional, and euler buckling in thin-walled columns.” J. Struct. Eng., 128(3), 289–299.
Schafer, B. W. (2002b). “Design manual for direct strength method of cold-formed steel design.” Rep. to the American Iron and Steel Institute, Washington, D.C.; available online at 〈www.ce.jhu.edu/bschafer/direct_strength〉 (March 2002).
Schafer, B. W., and Peköz, T. (1998). “Direct strength prediction of cold-formed steel members using numerical elastic buckling solutions.” Proc., 14th Int. Spec. Conf. on Cold-Formed Steel Structures, St. Louis., University of Missouri-Rolla, Rolla, Mo.
Schafer, B. W., and Peköz, T.(1999). “Laterally braced cold-formed steel flexural members with edge stiffened flanges.” J. Struct. Eng., 125(2), 118–127.
Schafer, B. W., and Trestain, T. (2002). “Interim design rules for flexure in cold-formed steel webs.” Proc., 16th Int. Spec. Conf. on Cold-Formed Steel Structures, Orlando, Fla., University of MissouriRolla, Rolla, Mo.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Mar 29, 2002
Accepted: Mar 6, 2003
Published online: Nov 14, 2003
Published in print: Dec 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.