Fire Resistance of Walls and Floors Using Light-Gauge Steel Shapes
Publication: Journal of Structural Engineering
Volume 129, Issue 11
Abstract
This paper reports on the results of experimental studies on the fire resistance of walls (partition walls and exterior walls) and floor–ceiling systems manufactured using galvanized light-gauge steel shapes. Galvanized light-gauge steel shapes with thickness up to 1.6 mm are used in place of the wooden structural frames of wood-frame type construction. The fire resistance of walls and floor–ceiling systems made by attaching plywood, gypsum boards, and other materials to these steel shapes, depends mainly on the thermal shielding performance of the attached gypsum boards. Loaded heat tests were conducted and it has been clarified that the prevention of gypsum boards from falling off is important for improving their fire resistance, that the increase in the number and thickness of gypsum board to be applied and the use of reinforced gypsum board are effective and that the practical fire rating (up to 60 min) can be obtained without direct fire protection for shapes.
Get full access to this article
View all available purchase options and get full access to this article.
References
Burstrand, H. (1998). Light gauge steel framing for housing, Swedish Institute of Steel Construction, Stockholm, Sweden, 1–100.
Elhajj, N. (1998). “Fire rated assemblies of cold-formed steel construction.” Tech., Note, Vol. 420, Light Gauge Steel Engineers Association, Nashville, Tenn., 1–8.
Fukushima, T., Ohta, K., Karatsu, T., and Nakamura, K. (1999). “Fire resistance of steel-framed houses No. 1, Study on the properties of steel-framed houses No. 22.” Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Tokyo, 11–12.
Hirakawa, T., Sakumoto, Y., Kubota, S., Shimizu, K., and Masuda, H. (1999). “Fire resistance of steel-framed houses No. 2, Test results and consideration, Study on the properties of steel-framed houses No. 22.” Summaries of Technical Papers of Annual Meeting, Architectural In-stitute of Japan, Tokyo, 13–14.
International Standard Organization. (1975). “Fire-resistance tests—elements of building construction.” ISO 834, 1–16.
Japanese Standards Association. (1997). Japanese industrial standards handbook JIS A 6901, Tokyo, 540–546.
Kubota, S., Sakumoto, Y., Hirakawa, T., Ohta, K., Shimizu, H., Karatsu, T., Ohmori, T., Masuda, H., and Nakamura, K. (1998). “Experimental studies of quasifireproof construction (walls and floors) of steel-framed houses, Study on the properties of steel-framed houses No. 20.” Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Tokyo, 15–16.
Ministry of Construction. (1993). “Method of certification of quasi-fireproof construction.” Notification No. 1454, The Building Center of Japan, Tokyo, 1–8.
UL fire resistance directory, Vol. 1. (2002). Underwriter’s Laboratory, Ill.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: May 1, 2002
Accepted: Oct 29, 2002
Published online: Oct 15, 2003
Published in print: Nov 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.