Cap Model for Limit Analysis and Strengthening of Masonry Structures
Publication: Journal of Structural Engineering
Volume 129, Issue 10
Abstract
This paper presents a general method for the limit analysis of structures made of rigid blocks, which can be used in the assessment of ancient masonry structures. This method takes into account nonassociated flow rules and limited compressive stresses for masonry. The mathematical programming problem resulting from the formulation is a nonlinear optimization problem. The feasible initial solution is obtained by solving a mixed complementarity problem while, in a second step, the complementarity constraint is temporarily relaxed to allow for optimizing the load factor. A tie element added to the rigid block formulation permits the analysis and design of strengthening. Several results, obtained by a computer implementation of the method, are presented and discussed. The results show the validity of the method by comparison with experimental data, and also show the benefit of the approach in providing a better insight into the behavior of ancient masonry structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
ActiveX and VBA developer’s guide. (1999). Autodesk. San Rafael, Cal.
Baggio, C., and Trovalusci, P.(1998). “Limit analysis for no-tension and frictional three-dimensional discrete systems.” Mech. Struct. Mach., 26(3), 287–304.
Begg, D. W., and Fishwick, R. J. (1995). “Numerical analysis of rigid block structures including sliding.” Proc., 3rd Int. Symp. on Computater Methods in Structural Masonry, J. Middleton and G. N. Pande, eds., Lisbon Portugal, 177–183.
Bono, F., Tirelli, D., Verzelletti, G., Molina, J., and Renda, V. (1998). “Shape memory alloy crossbracing of masonry walls: cyclic test of a large scale model and numerical analyses.” Proc., Workshop on Seismic Performance of Monuments, Lisbon, Portugal, 239–248.
Brooke, A., Kendrick, D., Meeraus, A., Raman, R., and Rosenthal, R. E. (1998). “GAMS a user’s guide.” 〈http://www.gams.com/docs/gams/GAMSUsersGuide.pdf〉 Washington, D.C. (Nov. 21, 2001)
Ferris, M. C., and Tin-Loi, F.(2001). “Limit analysis of frictional block assemblies as a mathematical program with complementarity constraints.” Int. J. Mech. Sci., 43, 209–224.
Gilbert, M. (1998). “On the analysis of multi-ring brickwork bridges.” Arch Bridges, A. Sinopoli, ed., Balkema, Rotterdam, 109–118.
Gilbert, M., and Melbourne, C.(1994). “Rigid-block analysis of masonry structures.” Struct. Eng.,72(21), 356–361.
Hendry, A. W. (1998). Structural masonry, 2nd Ed., Macmillan, London.
Heyman, J.(1969). “The safety of masonry arches.” Int. J. Mech. Sci., 11, 363–385.
Livesley, R. K.(1978). “Limit analysis of structures formed from rigid blocks.” Int. J. Numer. Methods Eng., 12, 1853–1871.
Lourenço, P. B., and Rots, J. G.(1997). “Multisurface interface model for analysis of masonry structures.” J. Eng. Mech., 123(7), 660–668.
Lourenço, P. B., Rots, J. G., and Blaauwendraad, J.(1998). “Continuum model for masonry: Parameter estimation and validation.” J. Struct. Engl, 124(6), 642–652.
Nielsen, M. P. (1999). Limit analysis and concrete plasticity, 2nd Ed., CRC, Boca Raton, Fla.
Oliveira, D. V. (2000). “Mechanical characterization of stone and brick masonry.” Rep. No. 00-DEC/E-4, Univ. do Minho, Guimarães, Portugal.
Orduña, A., and Lourenço, P. B. (2001). “Limit analysis as a tool for the simplified assessment of ancient masonry structures.” Proc., 3rd Int. Seminar on Historical Constructions, Guimarães, Portugal, 511–520.
Ramos, L. F. (2002). “Experimental and numerical analysis of historical masonry structures (in Portuguese).” MSc thesis, Univ. do Minho, Guimarães, Portugal.
Royles, R., and Hendry, A. W.(1991). “Model tests on masonry arches.” Proc., Inst. Civ. Eng., Struct. Build., 91, 299–321.
Sincraian, G. E. (2001). “Seismic behavior of blocky masonry structures.” PhD thesis, Instituto Superior Técnico, Lisbon, Portugal.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Apr 24, 2002
Accepted: Sep 23, 2002
Published online: Sep 15, 2003
Published in print: Oct 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.