Plastic Limit Temperatures of Flexibly Connected Steel Frames: A Linear Programming Problem
Publication: Journal of Structural Engineering
Volume 129, Issue 1
Abstract
A linear programming (LP) formulation is proposed for the evaluation of the plastic limit temperature of flexibly connected steel frames exposed to fire. Within a framework of discrete models and piecewise linearized yield surfaces, the formulation is derived based on the lower-bound theorem in plastic theory, which leads to a compact matrix form of an LP problem. The plastic limit temperature is determined when the equilibrium and yield conditions are satisfied. The plastic mechanism can be checked from the dual solutions in the final simplex tableau of the primal LP solutions. Three examples are presented to investigate the effects of the partial-strength beam-to-column joints. Eigenvalue analysis of the assembled structural stiffness matrix at the predicted limit temperature is performed to check for structural instability. The advantage of the proposed method is that it is simple, computationally efficient, and its solutions provide the necessary information at the limit temperature. The method can be used as an efficient tool to a more refined but computationally expensive step-by-step historical deformation analysis.
Get full access to this article
View all available purchase options and get full access to this article.
References
Arora, J. S. (1989). Introduction to optimum design, McGraw-Hill, Singapore, 625.
Bjorhovde, R., Colson, A., and Brozzetti, J.(1990). “Classification system for beam-to-column connections.” J. Struct. Eng., 116(11), 3059–3076.
British Standards Institution. (1990). “Structural use of steelwork in building part 8: Code of practice for fire resistance design.” BS5950: Part 8, London.
Brozzetti, J., (1979). “Code-based structural plasticity.” NATO advances study institute, Univ. of Waterloo, Canada, M. Z. Cohn, G. Maier, and D. E. Grierson, eds., Chap. 21, Pergamon, New York, 551–576.
Commission of European Communities. (1995). Design of steel structures: Part 1.2. General rules. Structural fire design. (EC3-1.2) Eurocode 3, Draft ENV 1993-1-2, Brussels, Belgium.
Contro, R., Poggi, C., and Cazzani, A.(1988). “Numerical analysis of fire effects on beam structures.” Eng. Comput., 5, 53–58.
El-Rimawi, J. A., Burgess, I. W., and Plank, R. J.(1995). “The analysis of semi-rigid frames in fire—A secant approach.” J. Constr. Steel Res., 33, 125–146.
Lawson, R. M.(1990). “Behaviour of steel beam-to-column connections in fire.” Struct. Eng., 68(14), 263–271.
Liu, T. C. H.(1996). “Finite-element modeling of behaviors of steel beams and connections in fire.” J. Constr. Steel Res., 36, 181–199.
Liu, T. C. H.(1999). “Fire resistance of unprotected steel beams with moment connections.” J. Constr. Steel Res., 51, 61–77.
Maier, G.(1970). “A matrix theory of piecewise linear elastoplasticity with interacting yield planes.” Meccanica, 5, 54–66.
Maier, G. (1979). “Future directions in engineering plasticity.” NATO advances study institute, Univ. of Waterloo, Canada, M. Z. Cohn, G. Maier, and D. E. Grierson, eds., Chap. 24, Pergamon, New York, 631–648.
Milke, J. A.(1999). “Analytical methods to evaluate fire resistance of structural members.” J. Struct. Eng., 125(10), 1179–1187.
Najjar, S. R., and Burgess, I. W.(1996). “A nonlinear analysis for three-dimensional steel frames in fire conditions.” Eng. Struct., 18(1), 77–89.
Saab, H. A., and Nethercot, D. A.(1991). “Modelling of steel frame behaviour under fire conditions.” Eng. Struct., 13, 371–382.
Tin-Loi, F.(1993). “Plastic limit analysis, mathematical programming and GAMS.” Eng. Optimiz., 20, 273–286.
Tin-Loi, F., and Vimonsatit, V.(1993). “Shakedown of frames with semirigid connections.” J. Struct. Eng., 119(6), 1694–1711.
Toh, W. S., Fung, T. C., and Tan, K. H.(2001a). “Compressive resistance of steel columns in fire: Rankine approach.” J. Struct. Eng., 126(3), 398–405.
Toh, W. S., Fung, T. C., and Tan, K. H.(2001b). “Strength and stability of steel frames in fire: Rankine approach.” J. Struct. Eng., 127(4), 461–469.
Toh, W. S., Fung, T. C., and Tan, K. H.(2001c). “Fire resistance of steel frames using classical and numerical methods.” J. Struct. Eng., 127(7), 829–838.
Wong, M. B.(2001). “Plastic frame analysis under fire conditions.” J. Struct. Eng., 127(3), 290–295.
Wong, M. B., Ghojel, J. I., and Crozier, D. A.(1998). “Temperature-time analysis for steel structures under fire conditions.” Struct. Eng. Mech., 6(3), 275–289.
Wong, M. B., and Patterson, N. L.(1996). “Unit load factor method for limiting temperature analysis of steel frames with elastic buckling failure mode.” Fire Saf. J., Amsterdam, 27, 113–122.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Oct 2, 2001
Accepted: Feb 22, 2002
Published online: Dec 13, 2002
Published in print: Jan 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.