Strengthening of Steel-Concrete Composite Girders Using Carbon Fiber Reinforced Polymers Sheets
Publication: Journal of Structural Engineering
Volume 129, Issue 1
Abstract
The use of advanced composite materials for rehabilitation of deteriorating infrastructure has been embraced worldwide. The conventional techniques for strengthening of substandard bridges are costly, time consuming, and labor intensive. Many new techniques have used the lightweight, high strength, and the corrosion resistance of fiber reinforced polymers (FRP) laminates for repair and retrofit applications. The load-carrying capacity of a steel-concrete composite girder can be improved significantly by epoxy bonding carbon fiber reinforced polymers (CFRP) laminates to its tension flange. This paper presents the results of a study on the behavior of steel-concrete composite girders strengthened with CFRP sheets under static loading. A total of three large-scale composite girders made of W355×13.6 A36 steel beam and 75-mm thick by 910-mm wide concrete slab were prepared and tested. The thickness of the CFRP sheet was constant and a different number of layers of 1, 3, and 5 were used in the specimens. The test results showed that epoxy-bonded CFRP sheet increased the ultimate load-carrying capacity of steel-concrete composite girders and the behavior can be conservatively predicted by traditional methods.
Get full access to this article
View all available purchase options and get full access to this article.
References
Albrecht, P., Sahli, A., Crute, D., Albrecht, Ph., and Evans, B. (1984). “Application of adhesive to steel bridges.” FHWA-RD-84-037, The Federal Highway Administration, Washington, D.C., 106–147.
Dussek, I. (1980). “Strengthening of the bridge beams and similar structures by means of epoxy-resin-bonded external reinforcement.” TRB Record 785, Transportation Research Board, Washington, D.C., 21–24.
FHWA Bridge Program Group. (2001). “Count of deficient highway bridges.” 〈http://www.fhwa.dot.gov/bridge〉 (March 20, 2002), The Office of Bridge Technology, The Federal Highway Administration, Washington, D.C.
Fisher, J. W. (1997). “Evaluation of fatigue resistant steel bridges.” TRB Record 1594, Transportation Research Board, National Academy Press, Washington, D.C.
Klaiber, F. W., Dunker, K. F., Wipf, T. J., and Sanders, W. W. (1987). “Methods of strengthening existing highway bridges.” NCHRP 293, Transportation Research Board, Washington, D.C.
Mertz, D., and Gillespie, J. (1996). “Rehabilitation of steel bridge girders through the application of advanced composite material.” NCHRP 93-ID11, Transportation Research Board, Washington, D.C., 1–20.
Park, P., and Paulay, T. (1975). Reinforced concrete structures, 1st Ed., Wiley, New York.
Raithby, K. (1980). “External strengthening of concrete bridges with bonded steel plates.” Supplementary Rep. 612, Transport and Road Research Laboratory, Dept. of Environment, Crowthorn,England, 16–18.
Schwartz, M. (1992). Composite material handbook, 2nd Ed., McGraw-Hill, New York.
Sen, R., and Liby, L. (1994). “Repair of steel composite bridge sections using carbon fiber reinforced plastic laminates.” FDOT-510616, Florida Dept. of Transportation, Tallahassee, Fla.
Tavakkolizadeh, M., and Saadatmanesh, H.(2001). “Galvanic corrosion of carbon and steel in aggressive environments.” J. Compos. Constr., 5(3), 200–210.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Mar 27, 2001
Accepted: May 21, 2002
Published online: Dec 13, 2002
Published in print: Jan 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.