Seismic Design of Rib-Reinforced Steel Moment Connections based on Equivalent Strut Model
Publication: Journal of Structural Engineering
Volume 128, Issue 9
Abstract
This paper describes a seismic design procedure for rib-reinforced steel moment connections based on an equivalent strut model. It is shown from the results of finite-element analysis that the force transfer mechanism in the rib connections is completely different from that predicted by the classical beam theory and that a diagonal strip in the rib acts as a strut. By treating the rib as a strut, an equivalent strut model that could be used as the basis of a practical design procedure is proposed first. A step-by-step design procedure is then recommended based on the proposed model.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bruneau, M., Uang, C.-M., and Whittaker, A. (1998). “Ductile design of steel structures.” Design of ductile moment-resisting frames, MaGraw-Hill, New York, 273–380.
Iwankiw, N.(1997). “Ultimate strength consideration for seismic design of the reduced beam section (internal plastic hinge).” Eng. J. 34(1), 3–16.
Lee, C.-H., and Uang, C.-M.(1997). “Analytical modeling of dual panel zone in haunch repaired steel MRFs.” J. Struct. Eng., 123(1), 20–29.
Lee, C.-H., and Uang, C.-M. (2000). “Analytical modeling of seismic steel moment connections with welded straight haunch.” Proc., SEEBUS 2000, Kyoto, Japan, 31–140.
Lee, C.-H., and Uang, C.-M.(2001). “Analytical modeling and seismic design of steel moment connections with welded straight haunch.” J. Struct. Eng., 127(9), 1028–1035.
Load and resistance factor design specification. (1993). 2nd ed., AISC, Chicago.
Ricles, J. M., Mao, L., Kaufmann, E. J., Lu, L., and Fisher, J. W. (2000). “Development and evaluation of improved details for ductile welded unreinforced flange connections.” Rep. No. SAC BD 00-24, SAC Joint Venture, Sacramento, Calif.
SAC (2000). “Seismic design criteria for new moment-resisting steel frame construction.” Rep. No. FEMA 350, SAC Joint Venture, Sacramento, Calif.
Seismic provisions for structural steel buildings. (1997). 2nd Ed., AISC, Chicago.
Yu, Q.-S., Uang, C.-M., and Gross, J.(2000). “Seismic rehabilitation design of steel moment connection with welded haunch.” J. Struct. Eng., 126(1), 69–78.
Zekioglu, A., Mozaffarian, H., Chang, K. L., and Uang, C.-M.(1997). “Designing after Northridge.” Modern Steel Constr., 37(3), 36–42.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Accepted: Jan 3, 2002
Published online: Aug 15, 2002
Published in print: Sep 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.