Distortional Loads and Brace Forces in Steel Box Girders
Publication: Journal of Structural Engineering
Volume 128, Issue 6
Abstract
Trapezoidal steel box girders are often used in curved bridges due to the large torsional stiffness that results from the closed cross section. However, the torsional loading on the box girders can cause the cross section to distort from its original shape, which results in distortional stresses in the plates of the box section. The distortional stresses are controlled by internal cross frames that restrain the cross section from distortion. Current design specifications do not account for forces in the bracing members due to box girder distortion. This paper presents an analytical study on the distortional behavior of box girders with a trapezoidal cross-sectional shape. Typical torsional loads on curved box girders are discussed, and the distortional components of these applied torsional loads are studied. The distortional components from different torsional loads on trapezoidal box girders are identified and used to derive expressions for the brace forces in the internal cross frames for quasi-closed box girders. The results from the approximate equations for brace forces due to cross-sectional distortion are verified by three-dimensional finite-element analyses.
Get full access to this article
View all available purchase options and get full access to this article.
References
ANSYS users manual: version 5.3 (1996). ANSYS, Houston, Pa.
Dabrowski, R. (1968). Curved thin-walled girders, theory, and analysis, Cement and Concrete Association, London.
Fan, Z. (1999). “Field and computational studies of steel trapezoidal box girder Bridges.” PhD dissertation, Univ. of Houston, Houston.
Fan, Z., and Helwig, T. A.(1999). “Behavior of steel box girders with top flange bracing.” J. Struct. Eng., 125(8), 829–837.
Guide specifications of horizontally curved highway bridges. (1993). American Association of State Highway Officials, Washington, D.C.
Helwig, T. A., and Fan, Z. (2000). “Field and computational studies of steel trapezoidal box girder bridges.” TxDOT Rep. No. 0-1395-3F.
Highway Structural Design Handbook. (1982). AISC Marketing, Pittsburgh, Pa., 2.
Kollbrunner, C. F., and Basler, K. (1969). Torsion in structures—An engineering approach, Springer, New York.
Tung, D. H. H., and Fountain, R. S.(1970). “Approximate torsional analysis of curved box girders by the method.” AISC Eng. J.,7(3), 65–74.
Vlasov, V. Z. (1961). Thin-walled elastic beams, 2nd Ed., National Science Foundation, Washington, D.C.
Wright, R. N., Abdel-Samad, S. R., and Robinson, A. R.(1968). “BEF analogy for analysis of box girders.” J. Struct. Eng., 94(ST7), 1719–1046.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Aug 10, 2001
Accepted: Nov 14, 2001
Published online: May 15, 2002
Published in print: Jun 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.