Failure Analysis of Reinforced Concrete Shell Structures using Layered Shell Element with Pressure Node
Publication: Journal of Structural Engineering
Volume 128, Issue 5
Abstract
In this paper, a finite element analysis technique is presented for the path-dependent nonlinear failure analysis of reinforced concrete shell structures. A so-called pressure node is added into a layered shell element utilizing in-plane constitutive models of reinforced concrete and layered formulation in the failure analysis. By controlling the volume of the shell structures using the pressure node, postpeak softening behavior after the ultimate load of the shell structures is obtained. Since the constitutive models cover loading, unloading, and reloading paths, the element is capable of predicting the behaviors of reinforced concrete shells under cyclic loading. For verification of the techniques in this paper, failure analyses of reinforced concrete slabs subjected to in-plane and out-of-plane loads and cyclic transverse loads are performed and numerical results are compared with experimental data. In addition, reinforced concrete dome structures designed with different reinforcement ratios are also analyzed to check the applicability of the technique in this paper. Results show that the techniques can be applied effectively to the failure analysis of various types of reinforced concrete shell structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aghayere, A. O., and MacGregor, J. G.(1990). “Tests of reinforced concrete plates under combined in-plane and transverse loads.” ACI Struct. J., 87(6), 615–622.
Crisfield, M. A.(1981). “A fast incremental/iterative solution procedure that handles ‘snap-through’.” Comput. Struct., 13, 55–62.
de Borst, R., and Nauta, P.(1985). “Non-orthogonal cracks in a smeared finite element model.” Eng. Comput., 2, 35–46.
Hughes, T. J. R., and Brezzi, F.(1989). “On drilling degrees-of-freedom.” Comput. Methods Appl. Mech. Eng., 72, 105–121.
Irawan, P. (1995). “Three dimensional analysis of reinforced concrete structures.” PhD dissertation, Univ. of Tokyo, Tokyo.
Kato, B.(1979). “Mechanical properties of steel under load cycles idealizing seismic action.” CEB Bull. Inf., 131, 7–27.
Li, B., Maekawa, K., and Okamura, H.(1989). “Contact density model for stress transfer across cracks in concrete.” J. Fac. Eng., Univ. Tokyo (B) XL(1), 9–52.
Maekawa, K., Irawan, P., and Okamura, H.(1997). “Path-dependent three-dimensional constitutive laws of reinforced concrete-formulation and experimental verifications.” Struct. Eng. Mech., 5(6), 743–743.
Maekawa, K., and Okamura, H.(1983). “The deformational behavior and constitutive equation of concrete using elasto–plastic and fracture model.” J. Fac. Eng., Univ. Tokyo (B) 37(2), 253–328.
Okamura, H., and Maekawa, K. (1991). Nonlinear analysis and constitutive model in reinforced concrete, Gihodo-Shuppan, Tokyo.
Polak, M. A. (1992). “Reinforced concrete shell elements subjected to bending and membrane loads.” PhD dissertation, Univ. of Toronto, Toronto.
Shima, H., Chou, L., and Okamura, H.(1987). “Micro and macro models for bond behaviour in reinforced concrete.” J. Fac. Eng., Univ. Tokyo (B), 39(2), 133–194.
Song, H. W., and Tassoulas, J. L.(1993). “Finite element analysis of propagating buckles.” Int. J. Numer. Methods Eng., 36, 3529–3552.
Worsak, K. N.(1979). “A simple and efficient finite element for general shell analysis.” Int. J. Numer. Methods Eng., 14, 179–200.
Zienkiewicz, O. C., and Taylor, R. L. (1991). The finite element method, Vol. 2, 4th Ed., McGraw-Hill, New York.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Jan 23, 2001
Accepted: Aug 20, 2001
Published online: Apr 15, 2002
Published in print: May 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.