Strength Prediction for Discontinuity Regions by Softened Strut-and-Tie Model
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 128, Issue 12
Abstract
Discontinuities caused by abrupt changes in cross-sectional dimensions or by concentrated loads result in discontinuity regions due to disturbance in the flow of internal forces. A simplified method, based on the softened strut-and-tie model, for determining the shear strength of discontinuity regions failing in diagonal compressions is proposed in this paper. Strength predictions of the resulting expressions correlate well with the 449 test results of deep beams, corbels, squat walls, and beam-column joints available from the literature. The proposed method incorporates the shear resisting mechanisms as postulated by the softened strut-and-tie model, and it is a function of the concrete strength, horizontal shear reinforcement, vertical shear reinforcement, and geometrical configuration of the discontinuity regions. A numerical example is included for illustration.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (1999). “Building code requirements for structural concrete.” ACI 318-99 and Commentary (ACI 318R-99), Farmington Hills, Mich.
American Concrete Institute (ACI). (2002). “Building code requirements for structural concrete.” ACI 318-02 and Commentary (ACI 318R-02), Farmington Hills, Mich.
ASCE-ACI Committee 445. (1998). “Recent approaches to shear design of structural concrete.” J. Struct. Eng., 124(12), 1375–1417.
Comité Euro-International du Beton (CEB)-Fédération International de la Precontrainte (FIP). (1993). Model Code 1990, 1993, (MC90), Thomas Telford, London.
Hsu, T. T. C.(1996). “Toward a unified nomenclature for reinforced-concrete theory.” J. Struct. Eng., 122(3), 275–283.
[Also, see discussion by Mo, Y. L., and Hsu, T. T. C.(1997). J. Struct. Eng., 123(12), 1691–1693.]
Hwang, S. J., Fang, W. H., Lee, H. J., and Yu, H. W.(2001). “Analytical model for predicting shear strength of squat walls.” J. Struct. Eng., 127(1), 43–50.
Hwang, S. J., and Lee, H. J.(1999). “Analytical model for predicting shear strengths of exterior reinforced concrete beam-column joints for seismic resistance.” ACI Struct. J.,96(5), 846–857.
Hwang, S. J., and Lee, H. J.(2000). “Analytical model for predicting shear strengths of interior reinforced concrete beam-column joints for seismic resistance.” ACI Struct. J.,97(1), 35–44.
Hwang, S. J., Lu, W. Y., and Lee, H. J.(2000a). “Shear strength prediction for deep beams.” ACI Struct. J.,97(3), 367–376.
Hwang, S. J., Lu, W. Y., and Lee, H. J.(2000b). “Shear strength prediction for reinforced concrete corbels.” ACI Struct. J.,97(4), 543–552.
Jennewein, M., and Schäfer, K. (1992). “Standardisierte nachweise von häufigen D-Bereichen.” DAfStb H. 430, Beuth, Berlin (in German).
Mörsch, E. (1909). Concrete-steel construction, E. P. Goodrich, translator, McGraw-Hill, New York.
Ritter, W.(1899). “Die bauweise hennebique.” Schweizerische Bauzeitung,33(7), 59–61.
Rogowsky, D. M., and MacGregor, J. G.(1986). “Design of reinforced concrete deep beams.” Concr. Int.: Des. Constr. 8(8), 49–58.
Schäfer, K. (1996). “Strut-and-tie models for the design of structural concrete.” Notes of Workshop, Dept. of Civil Engineering, National Cheng Kung Univ., Tainan, Taiwan.
Vecchio, F. J., and Collins, M. P.(1993). “Compression response of cracked reinforced concrete.” J. Struct. Eng., 119(12), 3590–3610.
Zhang, L. X. B., and Hsu, T. T. C.(1998). “Behavior and analysis of 100 MPa concrete membrane elements.” J. Struct. Eng., 124(1), 24–34.
Zhang, L., and Jirsa, J. O. (1982). “A study of shear behavior of reinforced concrete beam-column joints.” PMFSEL Rep. No. 82-1, Dept. of Civil Engineering, Univ. of Texas, Austin, Tex.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Mar 23, 2001
Accepted: Mar 15, 2002
Published online: Nov 15, 2002
Published in print: Dec 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.