Seismic Analysis of RC Bridge Columns with Flexure-Shear Interaction
Publication: Journal of Structural Engineering
Volume 127, Issue 5
Abstract
In this paper, modeling approaches describing the hysteretic behavior of reinforced-concrete columns subjected to cyclic deformation reversals are investigated. The inelastic flexure and shear response of a reinforced-concrete column subjected to cyclic deformation is evaluated utilizing lumped hysteretic representations that exhibit efficiency and ease of modeling. The analytical predictions obtained with the new formulations are compared with experimental results from the literature. Comparisons between results with and without shear interaction reveal the importance of the flexure-shear interrelationship and the adequacy of the proposed approach in terms of strength and stiffness predictions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Concrete Institute (ACI). ( 1971). “Building code requirements for reinforced concrete.” ACI 318-89, Detroit.
2.
American Concrete Institute (ACI). ( 1983). “Building code requirements for reinforced concrete.” ACI 318-83, Detroit.
3.
Ang, B. G., Priestley, M. J. N., and Paulay, T. ( 1985). “Seismic shear strength of circular bridge piers.” Rep. No. 85-5, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
4.
Ang, B. G., Priestley, M. J. N., and Paulay, T. ( 1989). “Seismic shear strength of circular reinforced concrete columns.” ACI Struct. J., 86(1), 45–59.
5.
ASCE–ACI Joint Task Committee 426. (1973). “The shear strength of reinforced concrete members.”J. Struct. Div., ASCE, 99(6), 1091–1187.
6.
Bhide, S. B., and Collins, M. P. ( 1989). “Influence of axial tension on the shear capacity of reinforced concrete members.” ACI Struct. J., 86(5), 570–581.
7.
Clough, R. W. ( 1966). “Effect of stiffness degradation on earthquake ductility requirements.” Rep. No. 66-16, Earthquake Engineering Research Center, University of California, Berkeley.
8.
Collins, M. P. (1978). “Towards a rational theory for RC members in shear.”J. Struct. Div., ASCE, 104(4), 649–666.
9.
Elnashai, A. S., and Izzuddin, B. A. ( 1993). “Modelling of material non-linearities in steel structures subjected to transient dynamic loading.” Earthquake Engrg. and Struct. Dyn., 22, 509–532.
10.
Elnashai, A. S., Mwafy, A. M., and Lee, D. ( 1999). “Collapse analysis of reinforced concrete structures including shear.” Proc., '99 Struct. Congr., ASCE, Reston, Va., 195–198.
11.
Elnashai, A. S., Takanashi, K., Elghazouli, A. Y., and Dowling, P. J. ( 1991). “Experimental behaviour of partially encased composite beam-columns under cyclic and dynamic loads.” Proc., Instn. of Civ. Engrs., 91(Part 2), London, 259–272.
12.
Hsu, T. T. C. ( 1988). “Softened truss model theory for shear and torsion.” ACI Struct. J., 85(6), 624–635.
13.
Hsu, T. T. C., Mau, S. T., and Chen, B. ( 1987). “Theory of shear transfer strength of reinforced concrete.” ACI Struct. J., 84(2), 149–160.
14.
Hsu, T. T. C., and Mo, Y. L. ( 1985). “Softening of concrete in low-rise shearwalls.” ACI Struct. J., 82(6), 883–889.
15.
Izzuddin, B. A., and Elnashai, A. S. ( 1989). “ADAPTIC: A program for adaptive large displacement inelastic dynamic analysis of frames.” Engrg. Seismology and Earthquake Engrg. Rep. No. ESEE 7/89, Imperial College, London.
16.
Lee, D. ( 1999). “Inelastic seismic analysis and behaviour of RC bridges.” PhD thesis, Imperial College, London.
17.
Ma, S. H., Bertero, V. V., and Popov, E. P. ( 1976). “Experimental and analytical studies on the hysteretic behavior of reinforced concrete rectangular and T-beams.” Rep. No. EERC 76-2, Earthquake Engineering Research Center, University of California, Berkeley.
18.
Madas, P. J., and Elnashai, A. S. ( 1992). “A new passive confinement model for the analysis of concrete structures subjected to cyclic and transient dynamic loading.” Earthquake Engrg. and Struct. Dyn., 21, 409–431.
19.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.”J. Struct. Engrg., ASCE, 114(8), 1804–1826.
20.
Martinez-Rueda, J. E., and Elnashai, A. S. ( 1997). “Confined concrete model under cyclic loading.” Mat. and Struct., Paris, 30, 139–147.
21.
Maruyama, K., and Jirsa, J. O. ( 1979). “Shear behavior of reinforced concrete members under bidirectional reversed lateral loading.” CESRL Rep. No. 79-1, University of Texas at Austin.
22.
Maruyama, K., Ramirez, H., and Jirsa, J. O. (1984). “Short RC columns under bilateral load histories.”J. Struct. Engrg., ASCE, 110(1), 120–137.
23.
Otani, S., and Sozen, M. A. (1974). “Simulated earthquake tests of R/C frames.”J. Struct. Div., ASCE, 100(3), 687–701.
24.
Ozcebe, G., and Saatcioglu, M. (1989). “Hysteretic shear model for reinforced concrete members.”J. Struct. Engrg., ASCE, 115(1), 132–148.
25.
Pang, X. B. D., and Hsu, T. T. C. ( 1996). “Fixed angle softened truss model for reinforced concrete.” ACI Struct. J., 93(2), 197–207.
26.
Park, R., Priestley, M. J. N., and Gill, W. D. (1982). “Ductility of square-confined concrete columns.”J. Struct. Div., ASCE, 108(4), 929–950.
27.
Priestley, M. J. N., and Benzoni, G. ( 1996). “Seismic performance of circular columns with low longitudinal reinforced ratios.” ACI Struct. J., 93(4), 474–485.
28.
Priestley, M. J. N., Verma, R., and Xiao, Y. (1994). “Seismic shear strength of reinforced concrete columns.”J. Struct. Engrg., ASCE, 120(8), 2310–2329.
29.
Riddell, R., and Newmark, N. M. (1978). “Force-deformation models for nonlinear analyses.”J. Struct. Div., ASCE, 105(12), 2773–2778.
30.
Saatcioglu, M., Derecho, A. T., and Corley, W. G. ( 1983). “Modelling hysteretic behaviour of coupled walls for dynamic analysis.” Earthquake Engrg. and Struct. Dyn., 11, 711–726.
31.
Saiidi, M., and Sozen, M. A. ( 1979). “Simple and complex models for nonlinear seismic response of reinforced concrete structures.” Structural research series no. 415: Civil engineering studies, University of Illinois, Urbana.
32.
Takayanagi, T., and Schnobrich, W. C. ( 1979). “Non-linear analysis of coupled wall systems.” Earthquake Engrg. and Struct. Dyn., 7, 1–22.
33.
Takeda, T., Sozen, M. A., and Nielsen, N. N. (1970). “Reinforced concrete response to simulated earthquakes.”J. Struct. Div., ASCE, 96(12), 2557–2573.
34.
Vecchio, F. J., and Collins, M. P. ( 1986). “The modified compression field theory for reinforced concrete elements subjected to shear.” ACI Struct. J., 83(2), 219–231.
35.
Vecchio, F. J., and Collins, M. P. ( 1988). “Predicting the response of reinforced concrete beams subjected to shear using the modified compression field theory.” ACI Struct. J., 85(3), 258–268.
36.
Vecchio, F. J., and Emara, M. B. ( 1992). “Shear deformations in reinforced concrete frames.” ACI Struct. J., 89(1), 46–56.
37.
Watanabe, F., and Ichinose, T. ( 1991). “Strength and ductility design of RC members subjected to combined bending and shear.” Proc., Workshop on Concrete Shear in Earthquakes, University of Houston, 429–438.
Information & Authors
Information
Published In
History
Received: Mar 3, 2000
Published online: May 1, 2001
Published in print: May 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.