Simple Analysis of Framed-Tube Structures with Multiple Internal Tubes
Publication: Journal of Structural Engineering
Volume 127, Issue 4
Abstract
A framed-tube system with multiple internal tubes is analyzed using an orthotropic box beam analogy approach in which each tube is individually modeled by a box beam that accounts for the flexural and shear deformations as well as the shear-lag effects. The method idealizes the tubes-in-tube structure as a system of equivalent multiple tubes, each composed of four equivalent orthotropic plate panels capable of carrying axial loads and shear forces. By simplifying the assumptions in relation to the patterns of strain distributions in external and internal tubes, the structural analysis is reduced to the mere solution of a single second-order linear differential equation. The proposed method, which is intended to be used as a tool for preliminary design purposes, can be applied for the analysis of framed-tube structures with single and multiple internal tubes as well as those without internal tubes. The simplicity and accuracy of the proposed method is demonstrated through the analysis of three framed-tube structures (of different heights) without internal tubes. A 3D frame analysis program and two existing approximate methods are also included in the comparative study. Furthermore, three other framed-tube structures with one, two, and three internal tubes are analyzed to verify the applicability and reliability of the proposed method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chang, P. C. (1985). “Analytical modeling of tube-in-tube structure.”J. Struct. Engrg., ASCE, 111(6), 1326–1337.
2.
Chang, S. T., and Zheng, F. Z. (1987). “Negative shear lag in cantilever box girder with constant depth.”J. Struct. Engrg., ASCE, 113(1), 20–35.
3.
Computers and Structures Inc. ( 1989). Three dimensional analysis of building system—ETABS, Berkeley, Calif.
4.
Coull, A., and Ahmed, A. A. (1978). “Deflections of framed-tube structures.”J. Struct. Div., ASCE, 104(5), 857–862.
5.
Coull, A., and Bose, B. (1975). “Simplified analysis of framed-tube structures.”J. Struct. Div., ASCE, 101(11), 2223–2240.
6.
Foutch, D. A., and Chang, P. C. (1982). “A shear lag anomaly.”J. Struct. Div., ASCE, 108(7), 1653–1658.
7.
Ketter, R. L., Lee, G. C., and Prawel, S. P. ( 1979). Structural analysis and design, McGraw-Hill, New York.
8.
Khan, A. H., and Smith, B. S. ( 1976). “A simple method of analysis for deflection and stresses in wall-frame structures.” Build. and Environment, 11, 69–78.
9.
Kristek, V., and Bauer, K. (1993). “Stress distribution in front columns of high rise buildings.”J. Struct. Engrg., ASCE, 119(5), 1464–1483.
10.
Kwan, A. K. H. (1994). “Simple method for approximate analysis of framed tube structures.”J. Struct. Engrg., ASCE, 120(4), 1221–1239.
11.
Lee, K. K. ( 1999). “Orthotropic box beam analogy for analysis of framed tube structures with multiple internal tubes.” PhD thesis, Griffith University, Gold Coast, Australia.
12.
Reissner, E. ( 1945). “Analysis of shear lag in box beam by the principle of minimum potential energy.” Quarterly Appl. Mathematics, 4(3), 268–278.
13.
Schueller, W. ( 1992). Highrise building structures, Robert E. Krieger Publishing Co., New York.
14.
Singh, Y., and Nagpal, A. K. (1994). “Negative shear lag in framed-tube buildings.”J. Struct. Engrg., ASCE, 120(1), 3105–3121.
15.
Smith, B. S., and Coull, A. ( 1991). Tall building structures: Analysis and design, Wiley, Toronto.
Information & Authors
Information
Published In
History
Received: Sep 24, 1999
Published online: Apr 1, 2001
Published in print: Apr 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.