Posttensioned Seismic-Resistant Connections for Steel Frames
Publication: Journal of Structural Engineering
Volume 127, Issue 2
Abstract
Steel moment-resisting frames (MRFs) with posttensioned connections are constructed by posttensioning beams to columns using high strength strands. Top and seat angles are added to provide energy dissipation and redundancy under seismic loading. This new type of connection has several advantages, including the following: (1) field welding is not required; (2) the connection stiffness is similar to that of a welded connection; (3) the connection is self-centering; and (4) significant damage to the MRF is confined to the angles of the connection. An analytical model based on fiber elements was developed for these connections. Experimental test results were used to calibrate the model. The model was used for inelastic static analyses of interior connection subassembages as well as dynamic time history analyses of a six-story steel MRF. A self-centering capability and adequate stiffness, strength, and ductility were observed in the results of these analyses. Time history analysis results show that the seismic performance of a posttensioned steel MRF subject to the earthquake records studied here exceeds the performance of an MRF with typical welded connections subject to the same earthquake records.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ang, K. M., and Morris, G. A. ( 1984). “Analysis of three-dimensional frames with flexible beam-column connections.” Can. J. Civ. Engrg., Ottawa, 11, 245–254.
2.
Seismic performance of bolted and riveted connections, Rep. No. FGMA-288, Federal Emergency Management Agency, Washington, D.C.
3.
Cheok, G., and Lew, H. ( 1993). “Model precast concrete beam-to-column connections subject to cyclic loading.” PCI J., 38(4), 80–92.
4.
Cheok, G., and Stone, W. ( 1994). “Performance of 1/3-scale model precast concrete beam-column connections subjected to cyclic inelastic loads—report no. 4.” NISTIR 5436, National Institute of Standards and Technology, Gaithersburg, Md.
5.
Gerstle, K. H. ( 1985). “Flexibly connected steel frames.” Steel-frames structures: stability and strength, R. Narayanan, ed., Elsevier, London.
6.
Interim guidelines: Evaluation, repair, modification and design of welded steel moment frame structures. (1995). Rep. No. FEMA-267, Federal Emergency Management Agency, Washington, D.C.
7.
Kasai, K. ( 1998). “Seismic performance of steel buildings with semi-rigid connections.” Proc., SAC Progress Mtg., SAC, Los Angeles.
8.
Leon, R. T., and Shin, K. J. ( 1994). “Seismic performance of semi-rigid composite frames.” Proc., 5th U.S. National Conf. on Earthquake Engrg., Chicago, 243–251.
9.
Lorenz, R. T., Kato, B., and Chen, W. F., eds. ( 1993). Semi-rigid connections in steel frames, Council for Tall Build. and Urban Habitat, Lehigh University, Bethlehem, Pa.
10.
NEHRP recommended provisions for seismic regulation for new buildings. (1994). Rep. No. FEMA-223, Building Seismic Safety Council, Washington, D.C.
11.
Peng, S. W. ( 2001). “Large scale testing of seismically resistant moment connections for concrete filled tube column-to-WF beam hybrid systems.” PhD dissertation, Lehigh University, Bethlehem, Pa.
12.
Popov, E. P., and Stephen, R. M. ( 1972). “Cyclic loading of full size steel connections.” Bulletin No. 21, American Iron and Steel Institute, Washington, D.C.
13.
Prakash, V., Powell, G., and Campbell, S. ( 1993). “DRAIN-2DX base program description and user guide, version 1.10.” Rep. No. UCB/SEMM-93/17&18, Struct. Engrg. Mech. and Mat., Dept. of Civ. Engrg., University of California, Berkeley, Calif.
14.
Priestley, M., and MacRae, G. ( 1994). “Seismic tests of precast beam-to-column joint subassemblages with unbonded tendons.” PCI J., 41(1), 64–81.
15.
Roeder, C. W. ( 2000). “State of the art report on connection performance.” Rep. No. FEMA-355D, Federal Emergency Management Agency, Washington, D.C.
16.
Roeder, C. W., and Foutch, D. A. (1996). “Experimental results for seismic resistant steel moment frame connections.”J. Struct. Engrg., ASCE, 122(6), 581–588.
17.
El-Sheikh, M., Sause, R., Pessiki, S., Lu, L. W., and Kurama, Y. ( 1997). “Seismic analysis, behavior, and design of unbonded post-tensioned precast concrete frames.” Rep. No. EQ-97-02, Dept. of Civ. and Envir. Engrg., Lehigh University, Bethlehem, Pa.
18.
Youssef, N., Bonowitz, D., and Gross, J. ( 1995). “A survey of steel moment resisting frame buildings affected by the 1994 Northridge Earthquake.” Rep. No. NISTIR 5625, National Institute of Standards and Technology, Gaithersburg, Md.
Information & Authors
Information
Published In
History
Received: Jun 17, 1999
Published online: Feb 1, 2001
Published in print: Feb 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.