Fatigue Reliability Analysis of Microwave Antenna Towers due to Wind
Publication: Journal of Structural Engineering
Volume 127, Issue 10
Abstract
A reliability analysis of antenna towers against cumulative fatigue damage failure is presented for the gustiness of wind. Fatigue damage is evaluated by the S-N curve approach using Palmgren-Miner's rule. Application of Palmgren-Miner's rule to continuous random process is adopted for computing annual damage assuming the distribution of response to follow several types of distribution processes. The reliability against fatigue damage failure is obtained using two approaches. In the first approach, the total number of cycles of stress ranges over the design life period of the structure is assumed to follow a Weibull distribution. In the second approach, the first-order second-moment (FOSM) procedure is used. A 75 m tall antenna tower is considered as an illustrative example. The fatigue reliabilities obtained by the two different approaches are compared for a set of important parametric variations. Also, fatigue reliabilities determined by assuming different types of the distribution of responses are compared. Results of the study show that a Gaussian distribution provides the lowest estimate of the probability of fatigue failure. The probability of failure computed by the FOSM method is greater than that computed by the full distribution method. Parameters governing the wind characteristics at the site have significant influence on the probability of fatigue failure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ASCE Committee on Fatigue and Fracture Reliability. (1982a). “Fatigue reliability: development of criteria for design.”J. Struct. Div., ASCE, 108(1), 71–88.
2.
ASCE Committee on Fatigue and Fracture Reliability. (1982b). “Fatigue reliability: introduction.”J. Struct. Div., ASCE, 108(1), 3–23.
3.
ASCE Committee on Fatigue and Fracture Reliability. (1982c). “Fatigue reliability: variable amplitude load.”J. Struct. Div., ASCE, 108(1), 47–69.
4.
Byers, W. G., Marley, M. J., Mohammadi, J., Nielsen, R. J., and Sarkani, S. (1997a). “Fatigue reliability reassessment procedures: a state-of-the-art paper.”J. Struct. Engrg., ASCE, 123(3), 271–276.
5.
Byers, W. G., Marley, M. J., Mohammadi, J., Nielsen, R. J., and Sarkani, S. (1997b). “Fatigue reliability reassessment applications: a state-of-the-art paper.”J. Struct. Engrg., ASCE, 123(3), 277–285.
6.
Canadian Standards Association (CSA). ( 1986). “Antennas, towers, and antenna-supporting structures.” CAN/CSA-S37-M86, Ontario.
7.
Deoliya, R., and Datta, T. K. ( 1998). “Reliability of microwave towers against extreme winds.” Struct. Engrg. and Mech., Korea, 6(5), 555–570.
8.
Ditlevsen, O. ( 1986). “Random fatigue crack growth—a first-passage problem.” Engrg. Fracture Mech., 23, 467–477.
9.
Do, K. Q. ( 1986). “Fatigue life assessment for offshore structure in the Sea of Vietnam.” M. Eng. thesis, Asian Institute of Technology, Bangkok.
10.
Dowling, N. E. ( 1972). “Fatigue failure predictions for complicated stress-strain histories.” J. Mat., 7(1), 241–252.
11.
Hahin, C., South, J. M., Mohammadi, J., and Polepeddi, R. K. (1993). “Accurate and rapid determination of fatigue damage in steel bridges.”J. Struct. Engrg., ASCE, 119(1), 150–168.
12.
Jahren, C. T., and Rooker, J. A. ( 1992). “Fatigue life study for a railroad bridge.” Transp. Res. Rec. 1371, Transportation Research Board, Washington, D.C., 65–74.
13.
Lin, Y. K. ( 1967). Probabilistic methods in structural dynamics, McGraw-Hill, New York.
14.
Lin, Y. K., and Yang, J. N. ( 1983). “On statistical moments of fatigue crack propagation.” Engrg. Fracture Mech., 18(2), 243–256.
15.
Miner, M. A. ( 1945). “Cumulative damage in fatigue.” J. Appl. Mech., 67, 159–164.
16.
Moses, F., Schilling, C. G., and Raju, K. S. ( 1987). “Fatigue evaluation procedures for steel bridges.” NCHRP Rep. No. 299, Transp. Res. Board, National Research Council, Washington, D.C.
17.
Oritz, K. ( 1985). “On the stochastic modelling of fatigue crack growth.” PhD thesis, Stanford University, Stanford, Calif.
18.
Rao, S. S. ( 1992). Reliability based design, McGraw-Hill, New York.
19.
Rice, S. O. ( 1954). “Mathematical analysis of random noise.” Selected papers on noise and stochastic processes, N. Wax, ed., Dover, New York, 58–71.
20.
Rojiani, K., and Wen, Y. K. (1981). “Reliability of steel buildings under winds.”J. Struct. Div., ASCE, 107(1), 203–221.
21.
Shinozuka, M. ( 1990). “Stochastic methods in wind engineering.” J. Wind Engrg. and Indus. Aerodyn., 36(2), 829–843.
22.
Simiu, E., and Scanlan, R. H. ( 1986). “Wind effects on structures: an introduction to wind engineering.” Wiley, New York.
23.
Sweeney, A. P. ( 1979). “Importance of bridge redundancy in bridge fracture control.” Transp. Res. Rec. 711, Transportation Research Board, Washington, D.C., 23–30.
24.
Thom, H. C. S. (1968). “New distributions of extreme winds in the U.S.”J. Struct. Div., ASCE, 94(7), 1787–1801.
25.
Walker, W. H. ( 1980). “Stress history studies and the fatigue life expectancy of highway bridges.” Struct. Res. Series No. 476, Rep. No. UIUC-Eng-80-2005, University of Illinois, Urbana, Ill.
26.
Wen, Y. K. (1983). “Wind direction and structural reliability.”J. Struct. Engrg., ASCE, 109(4), 1028–1041.
27.
Wen, Y. K. (1984). “Wind direction and structural reliability: II.”J. Struct. Engrg., ASCE, 110(6), 1253–1264.
28.
Wirsching, P. H. ( 1995). “Probabilistic fatigue analysis.” Probabilistic structural mechanics handbook, C. Sundarajan, ed., Chapman & Hall, New York, 146–166.
29.
Wirsching, P. H., and Light, M. C. (1980). “Fatigue under wide band random stresses.”J. Struct. Div., ASCE, 106(7), 1593–1607.
30.
Yamada, K., and Hirt, M. A. ( 1982). “Fatigue life estimation using fracture mechanics.” Proc., IABSE Colloquium Lausanne 1982, Fatigue of Steel and Concrete Struct., International Association for Bridge and Structural Engineering, Zurich.
Information & Authors
Information
Published In
History
Received: Dec 9, 1999
Published online: Oct 1, 2001
Published in print: Oct 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.