Out-of-Plane Performance of Reinforced Masonry Walls with Openings
Publication: Journal of Structural Engineering
Volume 127, Issue 1
Abstract
The out-of-plane performance of partially grouted, reinforced concrete masonry walls subjected to simulated seismic loading is investigated. The three full-scale walls, with and without openings, were constructed from 190-mm-thick concrete blocks and were 9.0-m long and 2.4-m high with two 2.5-m-long return walls. A minimum quantity of reinforcement permitted by New Zealand Standard 4229 was used, and additional diagonal bars were added to the corners of the bond beam at the top of the wall. The test results show that the specimens exhibited a ductile behavior with a “pinched” shape of hysteresis response and that the ultimate out-of-plane capacities of the walls were considerably greater than the demands calculated using the current New Zealand masonry and concrete codes. The location and size of the openings influenced the load capacities significantly. Yield line theory gives a safe, conservative prediction of the out-of-plane capacity of partially grouted, reinforced masonry walls. Lateral deflection criteria are more important than force criteria in the out-of-plane design of walls.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abboud, B. E., and Hamid, A. A. ( 1990). “Behavior of model concrete masonry slender walls under out-of-plane lateral loads.” Proc., 5th North Am. Masonry Conf., 441–454.
2.
Abboud, B. E., Hamid, A. A., and Harris, H. G. ( 1996). “Flexural behavior of reinforced concrete masonry walls under out-of-plane monotonic loads.” ACI Struct. J., 93(May–June), 327–335.
3.
Abboud, B. E., Lu, X., and Schmitt, F. C. ( 1993). “An evaluation of three current deflection methods for predicting the lateral deflection of masonry walls.” Proc., 6th North Am. Masonry Conf., 73–86.
4.
Adham, et al. ( 1990). “Out-of-plane dynamic testing of concrete masonry walls.” Proc., 5th North Am. Masonry Conf., 385–396.
5.
Drysdale, R. G., Hamid, A. A., and Baker, L. R. ( 1994). Masonry structures behavior and design, Prentice-Hall, Englewood Cliffs, N.J.
6.
Essawy, A. S., and Drysdale, R. G. ( 1988). “Evaluation of available design methods for masonry walls subjected to out-of-plane loading.” Proc., 4th North Am. Masonry Conf., 32-1–32-12.
7.
Hamid, A. A., et al. ( 1990). “Hysteretic response and ductility of reinforced concrete masonry walls under out-of-plane loading.” Proc., 5th North Am. Masonry Conf., 397–409.
8.
Priestley, M. J. N., et al. ( 1994). “The US-TCCMAR full-scale five-story masonry research building test.” University of California, San Diego.
9.
Park, R., and Gamble, W. L. ( 1980). Reinforced concrete slabs, Wiley, New York, 274–464.
10.
Park, R., and Paulay, T. ( 1975). Reinforced concrete structures, Wiley, New York.
11.
Paulay, T., and Priestley, M. J. N. ( 1992). Seismic design of reinforced concrete and masonry buildings, Wiley, New York, 532–636.
12.
Seah, C. K., Dawe, J. L., and Dukuze, A. ( 1993). “A yield line analysis of concrete masonry panels for use on microcomputers.” Proc., 6th North Am. Masonry Conf., Vol. 2, 971–982.
13.
Singh, S. S. ( 1998). “The performance of a partially grouted reinforced concrete masonry wall and ribraft floor under simulated seismic loading.” ME Rep., Dept. of Civ. Engrg., University of Canterbury, Christchurch, New Zealand.
14.
Sveinsson, B. I., Kelly, T. E., Mayes, R. L., and Jones, L. R. ( 1988). “Out of plane response of masonry walls to seismic loads.” Proc., 4th North Am. Masonry Conf., 46-1–46-10.
15.
Standards Association of New Zealand (SANZ). ( 1986). “Code of practice for masonry structures not requiring specific design.” NZS4229, Wellington, New Zealand.
16.
Standards Association of New Zealand (SANZ). ( 1990). “Code of practice for the design of masonry structures.” NZS4230, Wellington, New Zealand.
17.
Standards Association of New Zealand (SANZ). ( 1992). “Code of practice for general structural design and design loadings for buildings.” NZS4203, Wellington, New Zealand.
18.
Standards Association of New Zealand (SANZ). ( 1995). “Concrete structures standard.” NZS3101, Wellington, New Zealand.
19.
Szilard, R. ( 1974). Theory and analysis of plates, Prentice-Hall, Englewood Cliffs, N.J.
20.
Zhang, X. ( 1998). “Out-of-plane performance of partially grouted reinforced concrete masonry walls under simulated seismic loading.” ME thesis, Dept. of Civ. Engrg., University of Canterbury, Christchurch, New Zealand.
Information & Authors
Information
Published In
History
Published online: Jan 1, 2001
Published in print: Jan 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.