Stress-Strain Characteristics of Brick Masonry under Cyclic Biaxial Compression
Publication: Journal of Structural Engineering
Volume 126, Issue 9
Abstract
Tests on half-scale and plast brick masonry specimens subjected to cyclic biaxial compression were conducted for five principal stress ratios. An interaction curve for the principal stresses at failure was obtained experimentally and expressed mathematically in terms of stress invariants. The failure under biaxial compression was characterized by midthickness splitting of the bearing area. The failure was quantified by the critical orthogonal strain that governed the failure, which in turn defines the critical stress-strain envelope curves. The critical envelope curve and the corresponding common point and stability point curves were expressed in mathematical form by general exponential formulas. The stability point curves can be used to establish the permissible stress level under in-plane cyclic loading.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AlShebani, M. M., and Sinha, S. N. (1999). “Stress-strain characteristics of brick masonry under uniaxial cyclic loading.”J. Struct. Engrg., ASCE, 125(6), 600–604.
2.
Dhanasekar, M., Kleeman, P. W., and Page, A. W. (1985a). “Biaxial stress-strain relations for brick masonry.”J. Struct. Engrg., ASCE, 111(5), 1085–1100.
3.
Dhanasekar, M., Kleeman, P. W., and Page, A. W. (1985b). “The failure of brick masonry under biaxial stresses.” Proc. Instn. of Civ. Engrs., Part 2, London, 79, 295–313.
4.
Dialer, C. (1991). “Some remarks on the strength and deformation behaviour of shear stressed masonry panels under static monotonic loading.” Proc., 9th Int. Brick Masonry Conf., Vol. 1, 276–283.
5.
Ganz, H. R. (1989). “Failure criteria for masonry.” Proc., 5th Can. Masonry Symp., Vol. 1, Masonry Institute of British Columbia, Vancouver, 65–77.
6.
Ganz, H. R., and Thurlimann, B. (1983). “Strength of brick walls under normal force and shear.” Proc., 8th Int. Symp. on Load Bearing Brickwork, No. 1, British Masonry Society, Stoke-on-Trend, U.K., 27–29.
7.
Mann, W., and Miller, H. (1982). “Failure of shear stressed masonry—an enlarged theory, tests and application to shear wall.” Proc., British Ceramic Soc., Load-Bearing Brickwork, Stoke-on-Trend, U.K., 7(30), 233–235.
8.
Naraine, K., and Sinha, S. N. (1992). “Stress-strain curves for brick masonry in biaxial compression.”J. Struct. Engrg., ASCE, 118(6), 1451–1461.
9.
Page, A. W. (1980). “A biaxial failure criterion for brick masonry in the tension-tension range.” Int. J. Masonry Constr., 1(1), 26–29.
10.
Page, A. W. (1981). “The biaxial compressive strength of brick masonry.” Proc., Instn. of Civ. Engrs., Part 2, London, 71, 893–906.
11.
Page, A. W. (1983). “The strength of brick masonry under biaxial compression-tension.” Int. J. Masonry Constr., 3(1), 26–31.
12.
Samarasinghe, W., and Hendry, A. W. (1980). “Strength of brickwork under biaxial stresses.” Proc., 7th Int. Symp. on Load Bearing Brickwork, British Ceramic Society, Stoke-on-Trend, U.K.
Information & Authors
Information
Published In
History
Received: Jul 23, 1999
Published online: Sep 1, 2000
Published in print: Sep 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.