Behavior and Modeling of Reinforced Composite Slab in Tension
Publication: Journal of Structural Engineering
Volume 126, Issue 7
Abstract
The load-deformation behavior of a reinforced composite slab is required to determine the moment-rotation behavior of a composite partially restrained connection. A component model that can be used to predict this load-deformation behavior is developed in this paper. The model is validated by comparing it to the results of four full-scale experimental tests that were designed to isolate the load-deformation behavior of the composite slab. Behavior models for reinforcing steel, concrete tension stiffening, and shear studs are presented or developed to provide the necessary tools to predict the composite slab load-deformation behavior.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AISC. (1993). Load and resistance factor design specification for structural steel buildings, American Institute of Steel Construction, Chicago, Ill.
2.
AISC. (1994). Metric load and resistance factor design specification for structural steel buildings, American Institute of Steel Construction, Chicago, Ill.
3.
AISI. (1991). LRFD cold-formed steel design manual, American Iron and Steel Institute, Washington, D.C.
4.
Buttry, K. E. ( 1965). “Behavior of stud shear connectors in lightweight and normal-weight concrete.” MS thesis, University of Missouri, Columbia, Mo.
5.
Collins, M. P., and Mitchell, D. (1991). Prestressed concrete structures, Prentice-Hall, Englewood Cliffs, N.J., 142–154.
6.
Easterling, W. S., Gibbings, D. R., and Murray, T. M. (1993). “Strength of shear studs in steel deck on composite beams and joists.” AISC Engrg. J., 30(2), 44–55.
7.
Johnson, R. P., Greenwood, R. D., and VanDalen, K. (1969). “Stud shear connectors in hogging moment regions of composite beams.” The Structural Engineer, 47(9), 345–350.
8.
Lyons, J. C., Easterling, W. S., and Murray, T. M. (1994). “Strength of headed shear studs.” Rep. CE/VPI-ST 94/07, Vols. I and II, Virginia Polytechnic Institute and State University, Blacksburg, Va.
9.
Oehlers and Coughlan. (1986). “Shear stiffness of stud shear connections in composite beams.” J. Construct. Steel Res., 6(4), 273–284.
10.
Ollgaard, J. G., Slutter, R. G., and Fisher, J. W. (1971). “Shear strength of stud connectors in lightweight and normal weight concrete.” AISC Engrg. J., 8(2), 55–64.
11.
Rex, C. O., and Easterling, W. S. (1996a). “Behavior and modeling of mild and reinforcing steel.” Re. CE/VPI-ST 96/12, Virginia Polytechnic Institute and State University, Blacksburg, Va.
12.
Rex, C. O., and Easterling, W. S. (1996b). “Behavior and modeling of a reinforced composite slab as part of a partially restrained composite beam-girder connection.” Rep. CE/VPI-ST 96/13, Virginia Polytechnic Institute and State University, Blacksburg, Va.
13.
Rex, C. O., and Easterling, W. S. (1996c). “Behavior and modeling of partially restrained composite beam-girder connections.” Rep. CE/VPI-ST 96/17, Virginia Polytechnic Institute and State University, Blacksburg, Va.
14.
Richard, R. M., and Elsalti, M. K. ( 1991). “PRCONN, moment-rotation curves for partially restrained connections.” Users manual. Dept. of Civil Engineering and Engineering Mechanics, University of Arizona, Tucson, Ariz.
15.
Sublett, C. N., Easterling, W. S., and Murray, T. M. (1992). “Strength of welded headed studs in ribbed metal deck on composite joists.” Rep. CE/VPI-ST 92/03, Virginia Polytechnic Institute and State University, Blacksburg, Va.
Information & Authors
Information
Published In
History
Published online: Jul 1, 2000
Published in print: Jul 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.