Elastic Stiffness Properties and Behavior of Truss-Core Sandwich Panel
Publication: Journal of Structural Engineering
Volume 126, Issue 5
Abstract
In this paper, a truss-core sandwich panel is introduced and its elastic properties are presented. Two thin flat sheets, separated by two inclined plates acting as the core and rigidly jointed at their ends, characterize the sandwich section. This construction form eliminates most of the attendant problems of conventional spot-welded or rivet-fastened sandwich panel construction. Advantages of the truss-core panel are discussed. The 3D sandwich panel is idealized as an equivalent 2D orthotropic thick plate continuum. Equivalent bending, twisting, and transverse shear stiffness are derived, and the influence of the relatively weak shear stiffness on the behavior is discussed. By integrating these elastic stiffness constants into closed-form solution, panel response is calculated. The calculated results, which require significantly less computational effort, agree well with 3D finite-element analysis. Comparisons of stiffnesses and deflections with the corresponding responses of conventional sandwich construction are provided. This study indicates that the truss-core sandwich panel performs better due to its inherently higher flexural resistance per unit weight.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, H. G. (1969). Analysis and design of structural sandwich panels. Pergamon, Oxford, U.K.
2.
Fung, T. C., Tan, K. H., and Lok, T. S. (1993). “Analysis of C-core sandwich plate decking.” Proc., 3rd Int. Offshore and Polar Engrg. Conf., Vol. 4, 244–249.
3.
Fung, T.-C., Tan, K.-H., and Lok, T.-S. (1994). “Elastic constants for Z-core sandwich panels.”J. Struct. Engrg., ASCE, 120(10), 3046–3055.
4.
Fung, T. C., Tan, K. H., and Lok, T. S. (1996). “Shear stiffness DQy for C-core sandwich panels.”J. Struct. Engrg., ASCE, 122(8), 958–966.
5.
Libove, C., and Hubka, R. E. ( 1951). “Elastic constants for corrugated core sandwich plates.” NASA Tech. Note 2289.
6.
Lok, T. S., Cheng, Q. H., and Heng, L. (1999). “Equivalent stiffness parameters of truss-core sandwich panel.” Proc., 9th Int. Offshore and Polar Engrg. Conf., Vol. 4, 282–288.
7.
MARC K6.0 documents. (1994). Vol. B, Element Library, MARC Analysis Research Corp., Calif.
8.
Plantema, F. J. (1966). Sandwich construction: The bending and buckling of sandwich beams, plates and shells. Wiley, New York.
9.
Tan, K. H., Fung, T. C., and Lok, T. S. (1993). “A simplified thick plate analysis of all-steel sandwich panels.” The Struct. Engrg., London, 71(14), 253–258.
10.
Tan, K. H., Montague, P., and Norris, C. (1989). “Steel sandwich panels: Finite element, closed solution and experimental comparisons on a 6m × 2.1m panel.” The Struct. Engrg., London, 67(9), 159–166.
11.
Timoshenko, S. (1958). Strength of Materials—Part I: Elementary theory and problems. Robert E. Krieger Publishing Co., New York.
Information & Authors
Information
Published In
History
Received: Apr 9, 1999
Published online: May 1, 2000
Published in print: May 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.