Dynamic Assessment of Curved Cable-Stayed Bridge by Model Updating
Publication: Journal of Structural Engineering
Volume 126, Issue 2
Abstract
Bridges are indispensable components of the infrastructure of modern society, and their assessment via techniques of structural dynamics is assuming greater importance. This assessment concerns performance of the as-built structure compared to the design and can also extend to the assessment of structural deterioration or damage. Simple validation of numerical results by dynamic testing has met some success; however, feedback from testing into analysis is usually crude, and only recently have systematic techniques been developed that can be supplied to such structures. This paper investigates the application of sensitivity-based model updating technology to the dynamic assessment of the Safti Link Bridge, a curved cable-stayed bridge in Singapore. Based on the measured modal data from prototype testing, the simulated dynamic properties obtained via finite-element analysis have been significantly improved by modification of uncertain structural parameters such as Young's modulus of concrete and structural geometry.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ANSYS user manual, release 5.4. (1997). Swanson Analysis System, Inc., Houston.
2.
Brownjohn, J. M. W. (1997). “Vibration characteristics of a suspension footbridge.” J. Sound and Vibration, 202(1), 29–46.
3.
Brownjohn, J. M. W., Dumanoglu, A. A., and Severn, R. T. (1992). “Ambient vibration survey of the Faith Sultan Mehmet (Second Bosporus) suspension bridge.” Earthquake Engrg. and Struct. Dyn., 21, 907–924.
4.
Brownjohn, J. M. W., Lee, J., and Cheong, B. (1999). “Dynamic performance of a curved cable-stayed bridge.” Engrg. Struct., 21(11), 1015–1027.
5.
Brownjohn, J. M. W., and Xia, P. Q. (1999). “Finite element model updating of a damaged structure.” Proc., 17th Int. Modal Analysis Conf., Society for Experimental Mehcanics, Inc., Bethel, Vol. 1, 457–462.
6.
Cantieni, R. (1996). “Updating of analytical models of existing large structures based on modal testing.” Proc., Workshop US-Europe on Bridge Engrg.: Evaluation Mgmt. and Repair, ASCE, Reston, Va., 15–17.
7.
Casa, J. R. (1995). “Full scale dynamic testing of the Alamillo Cable-Stayed Bridge in Sevilla (Spain).” Earthquake Engrg. and Struct. Dyn., 24(1), 35–51.
8.
Doebling, S. W., Farrar, C. R., and Prime, M. B. (1998). “A summary review of vibration-based damage identification methods.” The Shock and Vibration Digest, 30(2), 9–105.
9.
Dumanoglu, A. A., Brownjohn, J. M. W., and Severn, R. T. (1991). “Seismic analysis of the Faith Sultan Mehmet (Second Bosporus) suspension bridge.” Earthquake Engrg. and Struct. Dyn., 21, 881–906.
10.
Felber, A. J. (1995). “Seismic assessment of existing bridges: one role for dynamic testing.” Proc., Bridges into the 21st Century, Hong Kong Institution of Engineers, 765–772.
11.
Felber, A., and Cantieni R. (1996). “Advances in ambient vibration testing: Ganter Bridge, Switzerland.” Struct. Engrg. Int., Zurich, Switzerland, 6(3), 187–190.
12.
FEMtools user's manual version 1.4. (1998). Dynamic Design Solutions, Leuven, Belgium.
13.
Hawk, H., and Small, E. P. (1998). “The BRIDGEIT bridge management system.” Struct. Engrg. Int., Zurich, Switzerland, 8(4), 309–314.
14.
Hearn, G. (1998). “Condition data and bridge management system.” Struct. Engrg. Int., Zurich, Switzerland, 8(3), 221–225.
15.
Kominek, M. (1998). “The Marian Bridge, Czech Republic.” Struct. Engrg. Int., Zurich, Switzerland, 8(4), 283–284.
16.
Law, S. S., and Ko, J. M. (1995). “Ambient vibration measurements of the Tsing Ma Bridge towers.” Proc., Bridges into the 21st Century, Hong Kong Institution of Engineers, 585–592.
17.
Lin, R. M., Lim, M. K., and Du, H. (1995). “Improved inverse eigensensitivity method for structural analytical model updating.” J. Vibration and Acoustics, 117, 192–198.
18.
Menn, C. (1996). “The place of aesthetics in bridge design.” Struct. Engrg. Int., Zurich, Switzerland, 6(2), 93–95.
19.
Mottershead, J. E., and Friswell, M. I. (1993). “Model updating in structural dynamics: A survey.” J. Sound and Vibration, 167(2), 347–375.
20.
Neville, A. M. (1982). Properties of concrete, 3rd Ed., Pitman Publishing, Ltd., London.
21.
Pavic, A., Hartley, M. J., and Waldron, P. (1998). “Updating of the analytical models of two footbridges based on modal testing of full scale structures.” Proc., 23rd Int. Seminar on Modal Analysis, Society for Experimental Mechanics, Inc., Bethel, 1111–1118.
22.
Rito, A. (1996). “Aesthetics and bridge design.” Struct. Engrg. Int., Zurich, Switzerland, 6(2), 91–92.
23.
Severn, R. T., Brownjohn, J. M. W., Dumanoglu, A. A., and Taylor, C. A. (1989). “A review of dynamic testing methods for civil engineering structures.” Civ. Engrg. Dyn., London, U.K., 1–24.
24.
Takenouchi, K. (1998). “Single pylons for curved cable-stayed bridges.” Struct. Engrg. Int., Zurich, Switzerland, 8(4), 269–272.
25.
Tan, S. C. ( 1996). “Safti Link Bridge, design and construction.” Defence Technology Group Seminars Series, Ministry of Defense, Singapore, 1–4.
26.
Troyano, L. F., Armisen, J. M., and Suarez, M. A. A. (1998). “The inclined towers of the Ebro and Lerez Bridge.” Struct. Engrg. Int., Zurich, Switzerland, 8(4), 258–260.
27.
Xia, P. Q. (1999). “Condition assessment of bridges by dynamic measurements.” Tech. Rep., School of Civ. and Struct. Engrg., Nanyang Technological University, Singapore.
Information & Authors
Information
Published In
History
Received: Apr 5, 1999
Published online: Feb 1, 2000
Published in print: Feb 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.