Stress Concentrations in Tubular DT-Joints for Fatigue Design
Publication: Journal of Structural Engineering
Volume 126, Issue 11
Abstract
The present paper concerns the calculation of stress concentration factors (SCFs) in steel multiplanar welded tubular double T- (DT-) connections, due to axial loads. SCFs are used for the prediction of the hot-spot stress, in order to assess joint structural integrity against fatigue. In the course of the present study, extensive computational research is conducted, which correlates fairly well with available experimental data, and a large SCF database for multiplanar joints is developed. SCF values are computed in characteristic locations around the welds at the chord and brace sides. Using the SCF database, a simple and efficient methodology is proposed to calculate stress concentrations in DT-joints. The important phenomenon of carryover loading, which refers to the interaction between out-of-plane braces, is examined in detail. The proposed SCF design methodology is in the form of simple equations and diagrams of the joint parameters. The out-of-plane angle ς between the two braces is shown to be a crucial parameter for the SCF value. The SCF values predicted through the parametric equations are in good agreement with the finite-element results. Finally, a methodology for predicting the hot-spot stress and the fatigue life of tubular DT-joints is presented. The design approach presented in this paper is aimed toward a more reliable, yet simple, tubular DT-joint design for structures subjected to repeated loading.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Petroleum Institute (API). ( 1993). “Recommended practice for planning, designing and constructing fixed offshore platforms.” 1st Ed., API RP2A-LRFD.
2.
American Welding Society (AWS). ( 1994). Structural Welding Code—Steel, ANSI/AWS, 14th Ed., Miami.
3.
de Back, J., and Vaessen, G. H. G. ( 1981). “Fatigue behavior and corrosion fatigue behavior of offshore structures.” ECSC Convention Final Rep. 7210-KB/6/602 (J. 7 1 f/76), Foundation for Materials Research in the Sea, Delft/Apeldoorn, The Netherlands.
4.
Efthymiou, M. ( 1988). “Development of SCF formulae and generalized functions for use in fatigue analysis.” OTJ '88.
5.
Efthymiou, M., and Durkin, S. ( 1985). “Stress concentrations in T/Y and gap/overlap K-joints.” Proc., BOSS '85: Behavior of Offshore Struct., 429–440.
6.
European Committee for Standardization (CEN). ( 1992). “Design of steel structures. part 1-1, Chapter 9—Fatigue.” Eurocode 3, Brussels.
7.
International Institute of Welding (IIW). ( 1985). Recommended fatigue design procedure for hollow section joints: part I—Hot spot stress method for nodal joints, Subcommission X-V-E, IIW Document XV-582-85, IIW Annual Assembly, Strasbourg, France.
8.
Karamanos, S. A., Romeijn, A., and Wardenier, J. ( 1997). “Stress concentrations and flexibility effects on the fatigue design of welded tubular connections.” Stevin Lab. Report 6-98-05, Sect. of Steel and Timber Struct., Facu. of Civ. Engrg., Delft University of Technology, Delft, The Netherlands.
9.
Karamanos, S. A., Romeijn, A., and Wardenier, J. ( 1999). “Stress concentrations in multi-planar welded tubular XX-connections.” J. Constr. Steel Res., 50(3), 259–282.
10.
Karamanos, S. A., Romeijn, A., and Wardenier, J. ( 2000). “Stress concentrations in tubular gap K-joints: Mechanics and fatigue design.” J. Engrg. Struct., 22(1), 4–14.
11.
Kellogg, M. W. ( 1956). Design of piping systems, 2nd Ed., Wiley, New York.
12.
Lieurade, H. P., and Gerald, J. ( 1981). “Results of static tests on ten full scale X-joints.” Int. Conf. Steel in Marine Struct.
13.
Ma, S. Y., and Tebbet, I. E. ( 1986). “Estimations of stress concentration factor for fatigue design of welded tubular connections.” Offshore Technol. Conf.
14.
Marshall, P. W., and Graff, W. J. ( 1976). “Limit state design of tubular connections.” Proc., BOSS '76: Behavior of Offshore Struct.
15.
Marshall, P. W., and Luyties, W. H. ( 1982). “Allowable stresses for fatigue design.” Proc., BOSS '82: Behavior of Offshore Struct.
16.
Romeijn, A. ( 1994). “Stress and strain concentration factors of welded multiplanar tubular joints.” PhD thesis, Delft University of Technology, Delft, The Netherlands.
17.
Romeijn, A., Puthli, R. S., de Koning, C., and Wardenier, J. ( 1992). “Stress and strain concentration factors for multi-planar joints made of circular hollow sections.” Proc., 2nd Int. Offshore and Polar Engrg. Conf., ISOPE '92.
18.
Romeijn, A., and Wardenier, J. ( 1994). “Stress and strain concentration factors of welded tubular joints caused by chord loads.” Proc., 6th Conf. on Tubular Struct., 643–649.
19.
van der Vegte, G. J., de Koning, C. H. M., Puthli, R. S., and Wardenier, J. ( 1991). “Static behavior of multi-planar welded joints in circular hollow sections.” TNO-IBBC Rep. BI-90-106/63.5.3860.
20.
van Wingerde, A. M., van Delft, D. R. V., Wardenier, J., and Packer, J. A. ( 1997). “Scale effects on the fatigue behavior of tubular structures.” Proc., IIW 5th Annu. Assembly Conf.: Int. Conf. on Perf. of Dynamically Loaded Welded Struct., 123–135.
21.
Wordsworth, A. C., and Smedley, G. P. ( 1978). “Stress concentration at unstiffened tubular joints.” European Offshore Steels Research Preprints, Vol. 2, Paper 31, Department of Energy, Cambridge, U.K.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 126 • Issue 11 • November 2000
Pages: 1320 - 1330
History
Received: May 14, 1999
Published online: Nov 1, 2000
Published in print: Nov 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.