Fracture Toughness Demands in Welded Beam-Column Moment Connections
Publication: Journal of Structural Engineering
Volume 126, Issue 1
Abstract
Detailed 2D and 3D finite-element analyses are used to study fracture toughness requirements in welded beam-column connections. Toughness demands are quantified in terms of the elastic stress intensity factor KI and inelastic crack tip opening displacement. The analyses confirm observations from the Northridge earthquake and full-scale connection tests that standard pre-Northridge connections with built-in weld root flaws and low toughness E70T-4 weld metal are likely to fracture without significant yielding. Subsequent analyses are used to examine modifications to the connection details that reduce loading-induced toughness demands on the welds and thereby improve the fracture resistance. Data describe how fracture demands are affected by the weld matching ratio, joint panel shear strength, weld reinforcing, and residual stresses.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ABAQUS/standard 1, version 5. (1997). Hibbitt, Karlsson and Sorenson, Pawtucket, R.I.
2.
Barsom, J. M., and Rolfe, S. T. (1987). Fracture and fatigue control in structures—Applications of fracture mechanics. Prentice-Hall, Englewood Cliffs, N.J.
3.
Bonowitz, D., and Youssef, N. (1995). “SAC survey of steel moment-resisting frame buildings affected by the 1994 Northridge earthquake.” SAC Tech. Rep. 95-06, SAC Joint Venture, Sacramento, Calif., 2-1–2-169.
4.
Chi, W.-M, Deierlein, G. G., and Ingraffea, A. R. (1997). Finite element fracture mechanics investigation of welded beam-column connections. SAC/BD-97/05, National Information Service for Earthquake Engineering, Berkeley, Calif.
5.
FRacture ANalysis Code 2-D/Layered. (1999). Cornell Fracture Group and Kansas State University, 〈http://www.cfg.cornell.edu〉.
6.
Hill, M. R., and Nelson, D. V. ( 1995). “The inherent strain method for residual stress determination and its application to a long welded joint.” Structural Integrity of Pressure Vessels, Piping, and Components, PVP-Vol. 318, ASME, New York, 343–352.
7.
“Interim guidelines: Evaluation, repair, modification and design of steel moment frames.” (1997). FEMA 267 (Revised 267a), Federal Emergency Management Agency, Washington, D.C.
8.
Kaufmann, E. J., and Fisher, J. W. (1996). “Fracture analysis of failed moment frame weld joints produced in full-scale laboratory tests and buildings damaged in the Northridge earthquake.” SAC Tech. Rep. 95-08, Part 2, SAC Joint Venture, Sacramento, Calif., 1-1–1-21.
9.
Kaufmann, E. J., and Fisher, J. W. (1997). Failure analysis of welded steel moment frames damaged in the Northridge earthquake. NISTIR 5944, National Institute of Standards and Technology, Gaithersburg, Md.
10.
Patterson, S., Vaillancourt, H., and Kuntz, T. (1998). “Variability and statistical bounds of the strength and fracture toughness of common structural steel shapes and weld metals used in welded moment frame building construction.” Proc., Int. Conf. on Welded Constr. in Seismic Areas, American Welding Society.
11.
Popov, E. P., Blondet, M., Stepanov, L., and Stojadinovic, B. (1996). “Full scale steel beam-column connection tests.” SAC Tech. Rep. 96-01, Part 2, SAC Joint Venture, Sacramento, Calif., 4-1–4-129.
12.
Seismic provisions for steel buildings. (1997). American Institute of Steel Construction, Chicago.
13.
Shuey, B. D., Engelhardt, M. D., and Sabol, T. A. (1996). “Testing of repair concepts for damaged steel moment connections.” SAC Tech. Report 96-01, Part 2, SAC Joint Venture, Sacramento, Calif., 5-1–5-332.
14.
“Standard test method for plane-strain fracture toughness of metallic materials.” (1992a). E 399-90, ASTM, West Conshohocken, Pa.
15.
“Standard test method for crack tip opening displacement (CTOD) testing.” (1992b). E 1290-89, ASTM, West Conshohocken, Pa.
16.
Zhang, J., and Dong, P. (1999). “Residual stress in welded moment frames and implications on structural performance.”J. Struct. Engrg., ASCE, in press.
Information & Authors
Information
Published In
History
Received: Apr 5, 1999
Published online: Jan 1, 2000
Published in print: Jan 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.