Design of Cross-Braced Frames for Predictable Buckling Behavior
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Structural Engineering
Volume 125, Issue 2
Abstract
The relationship between axial load and end-rotational stiffness is derived. Reliable postelastic performance of concentrically braced frames requires that braces be designed for predictable buckling behavior. For cross-braced frames, restraint provided by the complementary brace (including both translational and rotational stiffness) can have a significant effect on buckling strength; this effect is complicated by the tension in the complementary brace, which increases its stiffness. Differential equations of stability are employed to determine upper and lower bounds of buckling strength, as well as to formulate the relationship between axial load and rotational stiffness. Given current detailing practices, it is desirable to control the plane of buckling so that the ductility of end-gussets is utilized; values of the effective length factor are provided to allow the design of braces for predictable buckling behavior. Out-of-plane buckling of systems with crossed torsionally stiff braces may place severe torsional demands on the end-gussets of the brace in tension; in-plane buckling is a viable alternative if it can be shown that it occurs at a lower load than out-of-plane buckling.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Astaneh, Asl, A., Goel, S., and Hanson, R. (1985). “Cyclic out-of-plane buckling of double-angle gusset plates.”J. Struct. Engrg., ASCE, 111(5), 1135–1153.
2.
Chajes, A. ( 1974). Principals of structural stability theory . Prentice-Hall, Englewood Cliffs, N.J., 1974.
3.
DeWolf J. T., and Pelliccione, J. F. (1979). “Cross-bracing design.”J. Struct. Div., ASCE, 105(7), 1379–1391.
4.
El-Tayem, A. A., and Goel, S. C. ( 1986). “Effective length factor for design of X-bracing systems.” Engrg. J., 24(4), 41–45.
5.
Kitipornchai, S., and Finch, D. L. (1986). “Stiffness requirements for cross bracing.”J. Struct. Engrg., ASCE, 112(12), 2702–2707.
6.
Picard, A., and Beaulieu, D. ( 1987). “Design of diagonal cross bracings. Part 1: Theoretical study.” Engrg. J., 24(3), 122–126.
7.
Popov, E., and Black, R. G. (1981). “Steel struts under severe cyclic loadings.”J. Struct. Div., ASCE, 107(9), 1857–1881.
8.
Segal, F., Levy, R., and Rutenberg, A. (1994). “Design of imperfect cross-bracings.”J. Engrg. Mech., ASCE, 120(5), 1057–1075.
9.
Stoman, S. H. (1988). “Stability criteria for X-bracing systems.”J. Engrg. Mech., ASCE, 114(8), 1426–1434.
10.
Stoman, S. H. (1989). “Effective length spectra for cross bracings.”J. Struct. Engrg., ASCE, 115(12), 3112–3122.
11.
Thevedran, V., and Wang, C. M. (1993). “Stability of nonsymmetric cross-bracing systems.”J. Struct. Engrg., ASCE, 119(1), 169–180.
12.
Timoshenko, S. P. ( 1936). Theory of elastic stability . McGraw-Hill, New York.
13.
Timoshenko, S. P., and Gere, J. M. ( 1997). Mechanics of materials, 4th Ed., PWS, Boston.
14.
Wang, D. Q., and Boresi, A. P. (1992). “Theoretical study of stability criteria for X-bracing systems.”J. Engrg. Mech., ASCE, 118(7), 1357–1364.
Information & Authors
Information
Published In
History
Received: Jan 22, 1998
Published online: Feb 1, 1999
Published in print: Feb 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.