Experimental Study on Bolted Unstiffened Seat Angle Connections
Publication: Journal of Structural Engineering
Volume 125, Issue 11
Abstract
Seated-beam connections are occasionally used to attach a beam member to a column web or flange, particularly during construction. This paper presents the results of an experimental program that was designed to examine the flexural behavior of bolted, unstiffened seated angle connections. The sensitivity of several critical variables that influence the strength of the connection angle is reviewed. General descriptions of the test procedures and observations are presented, followed by a detailed discussion of the test variables. The test results are compared with corresponding theoretical predictions to asses the accuracy of various analytical models. It was found that seat angle strength is significantly influenced by beam setback, angle thickness, and the bolts that connect the angle to the flange of the supporting beam. Moreover, the strength of the seat angle can be accurately predicted using a plastic hinge based analytical model that reflects the failure mode.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Garrett, J. H., and Brockenbrough, R. L. (1986). “Design load for seated-beam in LRFD.” Engrg. J., 23(2), 84–88.
2.
Manual of steel construction, allowable stress design. (1989). 9th Ed., American Institute of Steel Construction, Chicago.
3.
Manual of steel construction, load and resistance factor design. (1994). 2nd Ed., Vol. II, American Institute of Steel Construction, Chicago.
4.
Roeder, C. W., and Dailey, R. H. (1989). “The results of experiments on seated beam connections.” Engrg. J., 26(3), 90–95.
5.
“Specification for structural joints using ASTM A325 or A490 Bolts—Load and Resistance Factor Design.” (1988). Research Council on Structural Connections, Engineering Foundation.
6.
“Standard test methods and definitions for mechanical testing of steel products.” (1994). A 370-94, ASTM, West Conshohocken, Pa.
7.
Steel construction, a manual for architects, engineers and fabricators of buildings and other steel structures. (1945). 4th Ed., American Institute of Steel Construction, New York.
8.
“Structural steel assembly.” (1994). Section 1926.751, 29 CFR, Chapter XVII, Occupational Safety and Health Administration, Washington, D.C.
9.
Yang, W. H. ( 1997). “The behavior and design of unstiffened seated-beam connections,” PhD thesis, Purdue University, West Lafayette, Ind.
10.
Yang, W. H., Chen, W. F., and Bowman, M. D. (1997). “The behavior and load-carrying capacity of seated-beam connections.” Engrg. J., 34(3), 89–103.
Information & Authors
Information
Published In
History
Received: Jun 29, 1998
Published online: Nov 1, 1999
Published in print: Nov 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.