Classification System for Rigid and Semirigid Connections
Publication: Journal of Structural Engineering
Volume 124, Issue 7
Abstract
A new classification system for beam-to-column connections is proposed in terms of the boundary between rigid and semirigid connections. Some typical subassemblages of multistory frames are chosen to consider the layout and member details of the structural systems in the classification. The connection model used for this classification is the power model proposed by Kishi and Chen. In this connection model, the connection curves for the respective connection types can be determined by their initial stiffness and ultimate moment capacity. The boundary between rigid and semirigid connections is established in terms of these two parameters by taking into account the elastic-plastic behaviors of the structural assemblages at the serviceability limit state along with the ultimate limit state. Furthermore, the required rotational capacity is calculated for the connections classified as rigid. The validity of the proposed classification system is examined by analyzing the overall behavior of semirigid frames. As a result, it is confirmed that the new classification criteria provides a more rational boundary compared with the existing classification systems.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bjorhovde, R., Colson, A., and Brozzeti, J.(1990). “Classification system for beam-to-column connections.”J. Struct. Engrg., ASCE, 116(11), 3059–3076.
2.
Chen, W. F., and Kishi, N.(1989). “Semi-rigid steel beam-to-column connections: Data base and modeling.”J. Struct. Engrg., ASCE, 115(7), 105–119.
3.
Eurocode 3: Design of steel structures. Part I: General rules and rules for buildings, Vol. 1. (1992). European Committee for Standardization, Brussels, Belgium.
4.
European Commission for Constructional Steelwork (ECCS). (1984). “Ultimate limit state calculation of sway frames with rigid joints.”Systems Publication No. 33, Technical Working Group 8.2, Brussels, Belgium.
5.
Goto, Y., and Miyashita, S.(1995). “Validity of classification systems of semirigid connections.”Engrg. Struct., 17(8), 544–553.
6.
Kishi, N., and Chen, W. F.(1993). “Design aid of semi-rigid connections for frame analysis.”Engrg. J., AISC, 30(3), 90–107.
7.
Kishi, N.(1997). “Study of Eurocode 3 steel connection classification.”Engrg. Struct., 19(9), 772–779.
8.
McNamee, B. M., and Lu, L. W.(1972). “Inelastic multistory frame buckling.”J. Struct. Div., ASCE, 98(7), 1613–1631.
9.
Yarimci, E. (1996). “Incremental inelastic analysis of framed structures and some experimental verifications,” PhD dissertation, Dept. of Civ. Engrg., Lehigh University, Bethlehem, Pa.
10.
Ziemian, R. D. (1992). “A verification study for methods of second-order inelastic analysis.” Annu. Tech. Session, Structural Stability Research Council, Pittsburgh, Pa.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Jul 1, 1998
Published in print: Jul 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.