Tests of Welded Beam-Column Subassemblies. I: Global Behavior
Publication: Journal of Structural Engineering
Volume 124, Issue 11
Abstract
This paper describes the results of cyclic loading tests applied to 14 full-scale beam-column subassemblages. First, efforts undertaken in the Japanese steel community in response to damage observed at welded beam-to-column connections in the 1995 Hyogoken-Nanbu (Kobe) Earthquake are introduced. Second, the major test parameters chosen in this study are described: type of steel, type of connection, type of weld access holes, type of weld tabs, and type of loading. Third, the test results are presented in terms of the ductility capacity of the test specimens. Major findings are as follows: (1) All specimens developed plastic rotations and cumulative plastic rotations of 0.03 rad and 0.3 rad, respectively, suggesting that ductility capacity of the specimens was sufficient in light of present Japanese seismic design; (2) dynamic loading had no detrimental effect on ductility capacity; (3) ductility capacity was significantly smaller for specimens with steel weld tabs than for those with flux tabs made of ceramic; and (4) modified details for the weld access hole had an effect of preventing cracks initiating from the toe of the weld access hole.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akiyama, H. (1989). “Prediction for seismic responses of flexible-stiff mixed structures with energy concentration in the first story,”J. Struct. and Constr. Engrg., Tokyo, (400), 77–84 (in Japanese).
2.
Bertero, V. V., Anderson, J. C., and Krawinkler, H. (1994). “Performance of steel building structures during the Northridge Earthquake,”Rep. No.UCB/EERC-94-09, Univ. of California at Berkely, Earthquake Engrg. Res. Ctr.
3.
“English edition of preliminary reconnaissance report of the 1995 Hyogoken-Nanbu Earthquake.” (1995). M. Nakashima and M. Bruneau eds., The Arch. Inst. of Japan (AIJ), Tokyo.
4.
“Full-scale test on plastic rotation capacity of steel wide-flange beams connected with square tube steel columns.” (1997). Kinki Branch of the Arch. Inst. of Japan (AIJ-Kinki), Steel Com., Osaka (in Japanese, with attached abridged English version).
5.
Inoue, K. (1995). “On the assessment of seismic capacity of structural steel members subjected to repeated plastic strain.”J. Struct. Engrg., Tokyo, 41B, 621–629 (in Japanese). Interim guidelines: Evaluation, repair, modification and design of welded steel moment frame structures. (1995). SAC (SEAOC-ATC-CUREe) Joint Venture, FEMA267, Sacramento, Calif. Japanese architectural standard specification JASS 6 steel work, 7th Ed. (1996). The Arch. Inst. of Japan, Tokyo (in Japanese).
6.
Nakashima, M., Inoue, K., and Tada, M.(1997). “Classification of damage to steel buildings observed in the 1995 Hyogoken-Nanbu Earthquake.”J. Engrg. Struct., 20(46), 271–281.
7.
Nakashima, M., Saburi, K., and Tsuji, B.(1996). “Energy input and dissipation behavior of structures with hysteretic dampers,”J. Earthquake Engrg. and Struct. Dyn., 25(5), 483–496.
8.
“Proposal on standard testing procedure for evaluation of seismic capacity of steel structures.” (1994). Rep. of Kozai Club, Tokyo (in Japanese).
9.
“Reconnaissance report on damage to steel building structures observed from the 1995 Hyogoken Nanbu Earthquake.” (1995). Kinki Branch of the Arch. Inst. of Japan, Steel Com., Osaka (in Japanese, with attached abridged English version).
10.
Suita, K., Nakashima, M., and Morisako, K.(1998). “Tests of welded beam-column subassemblies. II: Detailed behavior.”J. Struct. Engrg., ASCE, 124(11), 1245–1252.
11.
Tabuchi, M., et al. (1993). “Improvement on scallop shape in RHS column-to-H beam connections by welding.”J. Constr. Steel, Tokyo, 1, 65–72 (in Japanese).
12.
Technical recommendations for steel construction for buildings (Part 1 guide to steel-rib fabrications), 4th Ed. (1996). The Arch. Inst. of Japan, Tokyo (in Japanese).
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Nov 1, 1998
Published in print: Nov 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.