Torsional Restraint against Elastic Lateral Buckling
Publication: Journal of Structural Engineering
Volume 124, Issue 10
Abstract
It is well known that a central elastic torsional restraint restricts the lateral buckling shape of an elastic I-beam and increases its elastic flexural-torsional buckling resistance. However, available information on the effects of torsional restraints on elastic buckling are either incomplete, or in some cases inaccurate. This paper investigates the effects of moment distribution and load height on the elastic flexural-torsional buckling of beams with central torsional restraints. The effects of off-center and continuous restraints are also studied, and design approximations and procedures are developed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Flint, A. R.(1951). “The influence of restraints on the stability of beams.”The Struct. Engr., London, U.K., 29(9), 235–246.
2.
Galambos, T. V., ed. (1988). Guide to stability design criteria for metal structures, 4th Ed., John Wiley & Sons, Inc., New York.
3.
Hancock, G. J., and Trahair, N. S. (1978). “Finite element analysis of lateral buckling of continuously restrained beam-columns.”Civ. Engrg. Trans., Canberra, Australia, CE20(2), 120–127.
4.
Hancock, G. J., and Trahair, N. S. (1997). “Distortional buckling of single web steel members.”Proc., Theodore V. Galambos Symp., Structural Stability Research Council. Lehigh University, Bethlehem, Pa., 85–96. Handbook of structural stability . (1971). Column Research Committee of Japan, Corona Publishing Co., Ltd., Tokyo, Japan.
5.
Horne, M. R., and Ajmani, J. L. (1969). “Stability of columns supported laterally by side rails.”Int. J. Mech. Sci., 11, 159–174. Hot rolled and structural steel products . (1994). The Broken Hill Proprietary Co. Ltd., Melbourne, Australia.
6.
Kitipornchai, S., and Richter, N. S., (1978). “Elastic lateral buckling of beams with discrete intermediate restraints.”Proc., Inst. of Engrs. Aust. Conf. on Metal Struct., Canberra, Australia, 105–111. Load and resistance factor design specification for structural steel buildings . (1993). American Institute of Steel Construction, Inc., Chicago, Ill.
7.
Medland, I. C.(1980). “Buckling of interbraced beam systems.”Engrg. Struct., 2(2), 90–96.
8.
Milner, H. R. (1975). “The buckling of equal flanged beams under uniform moment restrained torsionally by stiff braces.”Proc., 5th Australasian Conf. on the Mech. of Struct. and Mat., Dept. of Civ. Engrg., University of Melbourne, Australia, 405–420.
9.
Mutton, B. R., and Trahair, N. S.(1973). “Stiffness requirements for lateral bracing.”J. Struct. Div., ASCE, 99(10), 2167–2182.
10.
Nethercot, D. A.(1973). “Buckling of laterally or torsionally restrained beams.”J. Engrg. Mech. Div., ASCE, 99(4), 773–791.
11.
Nethercot, D. A., and Rockey, K. C.(1972). “The lateral buckling of beams having discrete intermediate restraints.”The Struct. Engr., London, U.K., 50(4), 391–402.
12.
Papangelis, J. P., Hancock, G. J., and Trahair, N. S. (1995a). PRFELB%mdasha computer program for elastic flexural-torsional buckling analysis. School of Civ. and Min. Engrg., University of Sydney, Sydney, Australia.
13.
Papangelis, J. P., Trahair, N. S., and Hancock, G. J. (1995b). “Elastic flexural-torsional buckling of structures by computer.”Proc., 6th Int. Conf. on Civ. and Struct. Engrg. Computing, Civil-Comp Press, Edinburgh, U.K., 109–119.
14.
“Steel structures.” (1990). AS4100-1990, Standards Australia, Sydney, Australia.
15.
Taylor, A. C., and Ojalvo, M.(1966). “Torsional restraint of lateral buckling.”J. Struct. Div., ASCE, 92(2), 115–129.
16.
Trahair, N. S. (1993). Flexural-torsional buckling of structures. E & FN Spon, London, U.K.
17.
Trahair, N. S., and Bradford, M. A. (1991). The behavior and design of steel structures, Revised 2nd Ed., E&FN Spon, London, U.K.
18.
Trahair, N. S., and Nethercot, D. A. (1984). “Bracing requirements in thin-walled structures.”Developments in thin-walled structures%mdash2, J. Rhodes and A. C. Walker, eds., Elsevier Applied Science Publishers, New York, 93–130.
19.
Valentino, J., Pi, Y.-L., and Trahair, N. S.(1997). “Inelastic buckling of steel beams with central torsional restraints.”J. Struct. Engrg., ASCE, 123(9), 1180–1186.
20.
Yura, J. A. (1993). “Fundementals of beam bracing.”Proc., Struct. Stability Res. Council Conf., Lehigh University, Bethlehem, Pa., 1–19.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Oct 1, 1998
Published in print: Oct 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.