Service Load Response of Masonry Arch Bridges
Publication: Journal of Structural Engineering
Volume 124, Issue 1
Abstract
The behavior of filled masonry arch bridges under truck loading is examined by service load testing and by developing a finite-element model of a unit width of the structure. The field tests included five structures varying in span from 3 to 12 m. The structures tested included a group of three structures of similar geometry, material, age, and geographic location. The testing program demonstrated the significance of the linearity of the response to different loading levels and the importance of permanent deformations in evaluating a structure. The field tests also gave evidence of the range of responses of similar structures, and showed some evidence of the development of an incipient mechanism. The analytical model included approximation of the load distribution through the fill and the restraint to movements of the arch ring developed by the fill and spandrel walls. Reasonable approximations of the experimentally observed response of the structures were obtained using the analytical model. Guidance in selecting material properties and stiffnesses for the abutments and fill-in modeling masonry arch structures is given.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Boothby, T. E.(1995). “Collapse modes of masonry arch bridges.”J. British Masonry Soc., 9(2), 62–69.
2.
Bridle, R. J., and Hughes, T. G.(1990). “An energy method for arch bridge analysis.”Proc., Inst. of Civ. Engrgs., Part 2, 89(9), 375–385.
3.
Choo, B. S., Coutie, M. G., and Gong, N. G.(1991). “Finite-element analysis of masonry arch bridges using tapered elements.”Proc., Inst. of Civ. Engrgs., Part 2, 91(12), 755–770.
4.
Hendry, A. W., Davies, S. R., and Royles, R. (1985). “Test on a Stone Masonry Arch at Bridgemill-Girvan.”Contractor Rep. 7, Dept. of Transp. TRRL, Crowthorne, U.K.
5.
Heyman, J. (1982). The Masonry Arch. Ellis Horwood, Ltd., Chichester, England, U.K.
6.
Loo, Y.-C., and Yang, Y.(1991). “Cracking and failure analysis of masonry arch bridges.”J. Struct. Engrg., ASCE, 117(6), 1641–1659.
7.
Melbourne, C., and Wagstaff, M. (1992). “The behaviour of multispan masonry arch bridges.”Proc., 3rd Int. Masonry Conf., The British Masonry Society, London, England, U.K.
8.
Melbourne, C., and Walker, P. J. (1988). “Load tests to collapse of model brickwork masonry arches.”Proc., 8th Int. Brick and Block Masonry Conf., Vol. 2, Elsevier Applied Science, New York, N.Y. 991–1002.
9.
Page, J. (1989). “Load Tests to Collapse on Two Arch Bridges at Strathmashie and Barlae.”Res. Rep. 201, Dept. of Transp. TRRL, Crowthorne, U.K.
10.
Royles, R., and Hendry, A. W.(1991). “Model tests on masonry arches.”Proc., Inst. of Civ. Engrgs., Part 2, 91(6), 299–321.
11.
Smith, F. W., Harvey, W. J., and Vardy, A. E.(1990). “Three-hinge analysis of masonry arches.”The Struct. Engr., London, England, U.K., 68(11), 203–207.
12.
Taylor, N., and Mallinder, P. A.(1993). “The brittle hinge in masonry arch mechanisms.”The Struct. Engr., London, England, U.K., 71(20), 359–366.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Jan 1, 1998
Published in print: Jan 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.