Inelastic Buckling of Steel Beams with Central Torsional Restraints
Publication: Journal of Structural Engineering
Volume 123, Issue 9
Abstract
It is well known that a central elastic torsional restraint restricts the lateral buckling shape of an elastic I-beam and increases the elastic flexural-torsional buckling moment. However, the effect of torsional restraints on inelastic buckling has not been studied, and it is not known whether the limiting stiffness for elastic buckling can be applied to beams that buckle inelastically. This paper develops a finite-element model for the inelastic nonlinear flexural-torsional analysis of steel I-beams and uses it to investigate the effects of central elastic torsional restraints on the inelastic flexural-torsional buckling of steel I-beams. It is found that a central elastic torsional restraint increases the inelastic strength of the beam, but that the increase in the inelastic strength decreases as the beam's modified slenderness decreases. The limiting value of the stiffness of a central elastic torsional restraint at which the inelastic strength of the beam is equal to that of the corresponding beam with a rigid restraint is related to the modified slenderness of the beam. For a beam with a low modified slenderness that buckles inelastically the limiting restraint stiffness is much smaller than that for a beam that buckles elastically. For slender beams the moment transferred by a central torsional restraint of the limiting stiffness exceeds the strength design requirement for the restraint implied by Standards Australia's AS4100 as a result of excessive central twist rotation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AS4100-1990. Steel structures. (1990). Standards Australia (SA), Sydney, Australia.
2.
Bridgeman, P. W. (1952). Studies in large plastic flow and fracture. McGraw-Hill Book Co., Inc., New York, N.Y.
3.
Crisfield, M. A.(1981). “A fast incremental/iterative solution procedure that handles snap-through.”Comp. and Struct., 13(1), 55–62.
4.
Guide to stability design criteria for metal structures, 4th Ed. (1988). T. V. Galambos, ed., John Wiley & Sons, Inc., New York, N.Y.
5.
Hancock, G. J., and Trahair, N. S. (1978). “Finite element analysis of lateral buckling of continuously restrained beam-columns.”Civ. Engrg. Trans., Instn. of Engrs., Australia, Canberra, Australia, CE20(2), 120–127.
6.
Handbook of structural stability. (1971). Column Res. Com. of Japan, Corona Publishing Co., Ltd., Tokyo, Japan.
7.
Horne, M. R., and Ajmani, J. L.(1969). “Stability of columns supported laterally by side rails.”Int. J. Mech. Sci., 11(2), 159–174.
8.
Hot rolled carbon steel sections and plates. (1972). The Broken Hill Proprietary Co. Ltd. (BHP), Melbourne, Australia.
9.
Load and resistance factor design specification for structural steel buildings. (1993). Am. Inst. of Steel Constr. (AISC), Chicago, Ill.
10.
Medland, I. C.(1980). “Buckling of interbraced beam systems.”Engrg. Struct., 2(2), 90–96.
11.
Milner, H. R. (1975). “The buckling of equal flanged beams under uniform moment restrained torsionally by stiff braces.”Proc., 5th Australasian Conf. on Mech. of Struct. and Mat., Univ. of Melbourne, Melbourne, Australia, 405–420.
12.
Mutton, B. R., and Trahair, N. S.(1973). “Stiffness requirements for lateral bracing.”J. Struct. Div., ASCE, 99(10), 2167–2182.
13.
Mutton, B. R., and Trahair, N. S. (1975). “Design requirements for column braces.”Civ. Engrg. Trans., Instn. of Engrs., Australia, Canberra, Australia, CE17(1), 30–36.
14.
Nethercot, D. A.(1973). “Buckling of laterally or torsionally restrained beams.”J. Engrg. Mech. Div., ASCE, 99(4), 773–791.
15.
Papangelis, J. P., Hancock, G. J., and Trahair, N. S. (1995). PRFELB—a computer program for elastic flexural-torsional buckling analysis. School of Civ. and Min. Engrg., Univ. of Sydney, Sydney, Australia.
16.
Pi, Y.-L., and Trahair, N. S.(1992). “Prebuckling deflections and lateral buckling. II: applications.”J. Struct. Engrg., ASCE, 118(11), 2967–2987.
17.
Pi, Y.-L., and Trahair, N. S.(1994). “Nonlinear elastic analysis of steel beam-columns. I: theory.”J. Struct. Engrg., ASCE, 120(7), 2041–2061.
18.
Taylor, A. C., and Ojalvo, M.(1966). “Torsional restraint of lateral buckling.”J. Struct. Div., ASCE, 92(2), 115–129.
19.
Trahair, N. S. (1993). Flexural-torsional buckling of structures. E & FN Spon, London, U.K.
20.
Trahair, N. S., and Bradford, M. A. (1991). The behaviour and design of steel structures, 2nd Ed., Chapman & Hall, Ltd., London, U.K.
21.
Trahair, N. S., and Nethercot, D. A. (1984). “Bracing requirements in thin-walled structures.”Developments in thin-walled structures, 2nd Ed., J. Rhodes and A. C. Walker, eds., Elsevier Applied Science, New York, N.Y., 93–130.
22.
Woolcock, S. T., and Trahair, N. S.(1974). “Post-buckling behavior of determinate beams.”J. Engrg. Mech. Div., ASCE, 100(2), 151–171.
23.
Yura, J. A. (1993). “Fundamentals of beam bracing.”Proc., Struct. Stability Res. Council Conf., Struct. Stability Res. Council, Lehigh Univ., Bethlehem, Pa., 1–19.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Sep 1, 1997
Published in print: Sep 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.