Shear Lag in Bolted Angle Tension Members
Publication: Journal of Structural Engineering
Volume 123, Issue 9
Abstract
Steel angles acting in tension can be used singly or in pairs. In either case, it is not usually possible to connect both legs. This means that the effectiveness of the member must reflect the shear lag that is present in such an arrangement. This study reports on the experimental testing of 24 single and double angle tension members that use bolted end connections. This experimental work is supplemented by that of others and by an analytical investigation. Design recommendations are made that differ in some significant ways from design rules currently used.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chesson, E. Jr., and Munse, W. H.(1963). “Riveted and bolted joints: truss type tensile connections.”J. Struct. Div., ASCE, 89(1), 67–106.
2.
Davis, R. P., and Boomsliter, G. P. (1934). “Tensile tests of welded and riveted structural members.”J. Am. Welding Soc., (Apr. 21–27).
3.
DeSalvo, G. J., and Gorman, R. W. (1989). ANSYS engineering analysis system user's manual. Swanson Analysis Systems, Inc., Houston, Tex., Vol. 2.
4.
Gaylord, E. H. Jr., Gaylord, C. N., and Stallmeyer, J. E. (1992). Design of steel structures, 3rd Ed., McGraw-Hill Inc., New York, N.Y.
5.
Handbook of steel construction, 5th Ed. (1991). Canadian Institute of Steel Construction (CISC), Willowdale, Ontario, Canada.
6.
Hebrant, F., and Demol, L.(1955). “Tensile tests on riveted connections of rolled sections made of steel A37.”Acier Stahl Steel, 20, 178–184.
7.
Higgins, T. R. (1976). “Committee correspondence.”Rep. Task Com. 9 of Am. Inst. of Steel Constr., American Institute of Steel Construction (AISC), Chicago, Ill.
8.
Load and resistance factor design specification for structural steel buildings. (1993). American Institute of Steel Construction (AISC), Chicago, Ill.
9.
McKibbon, F. P. (1906). “Tension tests of steel angles.”Proc., ASTM, ASTM, West Conshohocken, Pa., Vol. 6, 267–274.
10.
McKibbon, F. P. (1907). “Tension tests of steel angles with various types of end-connections.”Proc., ASTM, ASTM, West Conshohocken, Pa., Vol. 7, 287–295.
11.
Mueller, W. H., and Wagner, A. L. (1985). “Plastic behavior of steel angle columns.”Res. Rep., Bonneville Power Administration, Portland, Oreg.
12.
Munse, W. H., and Chesson, E. Jr.(1963). “Riveted and bolted joints: net section design.”J. Struct. Div., ASCE, 89(1), 107–126.
13.
Nelson, H. M. (1953). “Angles in tension.”Rep. Publ. No. 7, British Constructional Steelwork Association, United Kingdom, 8–18.
14.
Specification for structural steel buildings—allowable stress design and plastic design. (1989). American Institute of Steel Construction (AISC), Chicago, Ill.
15.
Standard specifications for highway bridges, 4th Draft Ed. (1994). American Association of State Highway and Transportation Officials (AASHTO), Washington, D.C.
16.
“Structural quality steels.” (1992). CAN/CSA G40.21-M92, Canadian Standards Association (CSA), Rexdale, Ontario, Canada.
17.
Wu, Y., and Kulak, G. L. (1993). “Shear lag in bolted single and double angle tension members.”Struct. Engrg. Rep. No. 187, Dept. of Civ. Engrg., Univ. of Alberta, Edmonton, Canada.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Sep 1, 1997
Published in print: Sep 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.