Design of Single and Multiple Angle Columns and Beams
Publication: Journal of Structural Engineering
Volume 123, Issue 7
Abstract
Metal angle sections, singly or in combination, acting as concentric or eccentric columns, beams, or beam-columns, may buckle in flexure or torsion, or combinations thereof. The behavior of such structural elements is discussed, and simplified design formulas using a uniform treatment are suggested. The use of normalized slendernesses for all modes of buckling, with a normalized buckling curve, is described. Local buckling and torsional buckling are differentiated and the special cases in which local buckling can occur are identified. Single and double angles acting as concentrically and eccentrically loaded columns, and as beams with combined moments are treated. Failure modes are overall buckling in columns, beams, and beam-columns, and yielding or local buckling at the extreme fibers of beams and beam-columns.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Canadian Standards Association (CSA). (1994). “Limit states design of steel structures.”CAN/CSA-S16.1-94, CSA, Rexdale, Ontario, Canada.
2.
Canadian Standards Association (CSA). (1994). “Cold formed steel structural members.”CSA-S136-94, CSA, Rexdale, Ontario, Canada.
3.
Elgaaly, H., Dagher, W., and Davids, W.(1991). “Behavior of single angle compression members.”J. Struct. Engrg., ASCE, 117(12), 3720–3741.
4.
European Convention for Constructional Steelwork. (1976). “Manual of the stability of steel structures.” Liege, Belgium.
5.
International Organization for Standardization (ISO). (1995). “Aluminium structures—Material and design—Ultimate limit state under static loading.”Tech. Rep. 11069, ISO, Geneva, Switzerland.
6.
Marsh, C.(1969). “Single angles in tension and compression.”J. Struct. Div., ASCE, 95(5), 1043–1049.
7.
Marsh, C. (1972). “Lateral stability of single angle beam-columns.”Proj. 712, Canadian Steel Industries Construction Council, Toronto, Canada.
8.
Sharp, M. L.(1966). “Longitudinal stiffeners for compression members.”J. Struct. Div., ASCE, 92(5), 187–211.
9.
Temple, M. C., and Tan, J. C.(1988). “Interconnection of widely spaced angles.”Can. J. Civ. Engrg., Ottawa, Canada, 15(4), 732–741.
10.
Timoshenko, S. (1945). “Theory of bending, twisting, and buckling of thin-walled struts.”J. Franklin Inst., 239(3).
11.
Timoshenko, S. (1945). “Theory of bending, twisting, and buckling of thin-walled struts.”J. Franklin Inst., 239(4).
12.
Timoshenko, S. (1945). “Theory of bending, twisting, and buckling of thin-walled struts.”J. Franklin Inst., 239(5).
13.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability, 2nd Ed., Mcgraw-Hill Inc., New York.
14.
Woolcock, S. T., and Kitipornchai, S.(1986). “Design of single angle web struts in trusses.”J. Struct. Engrg., ASCE, 113(6), 1327–1345.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jul 1, 1997
Published in print: Jul 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.