Structural Model Updating Using Experimental Static Measurements
Publication: Journal of Structural Engineering
Volume 123, Issue 6
Abstract
The results of experiments on a small scale steel frame model are presented to support the “displacement equation error function,”“displacement output error function,” and “strain output error function” methods of structural parameter estimation using static nondestructive test data. Both static displacement and static strain measurements are used to successfully evaluate the unknown stiffness parameters of the structural components. Weight factors calculated from the variance of the measured data are applied to reduce error in the parameter estimates.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alcoe, D. J., and Hjelmstad, K. D. (1992). “Identification of parametric finite element models using experimental modal data.”Rep. No. SRS 566, UILU-ENG-92-2003, Univ. of Illinois at Urbana-Champaign, Urbana, Ill.
2.
Babu, S. R. (1992). “Experiment design for static parameter identification,” MS thesis, Tufts Univ., Medford, Mass.
3.
Banan, M. R., Banan, M. R., and Hjelmstad, K. D.(1994a). “Parameter estimation of structures from static response. I: Computational aspects.”J. Struct. Engrg., ASCE, 120(11), 3243–3258.
4.
Banan, M. R., Banan, M. R., and Hjelmstad, K. D.(1994b). “Parameter estimation of structures from static response. II: Numerical simulation studies.”J. Struct. Engrg., ASCE, 120(11), 3259–3283.
5.
Bruno, R. J. (1994). “Identification of nonlinear joints in a truss structure.”Proc., AIAA/ASME Adaptive Struct. Forum, AIAA/ASME, 402–410.
6.
Hajela, P., and Soeiro, F. J.(1990a). “Recent developments in damage detection based on system identification methods.”Struct. Optimization, 2, 1–10.
7.
Hajela, P., and Soeiro, F. J.(1990b). “Structural damage detection based on static and modal analysis.”AIAA J., 28(9), 1110–1115.
8.
Imbaro, G. R. (1993). “Parameter identification using experimental static measurements,” MS thesis, No. 4426, Tufts Univ., Medford, Mass.
9.
Lim, T. W.(1991). “Structural damage detection using modal test data.”AIAA J., 29(12), 2271–2274.
10.
Sanayei, M., and Nelson, R. B. (1986). “Identification of structural element stiffnesses from incomplete static test data.”Rep. Soc. of Automotive Engrs. Tech. Paper Ser., SAE-861793, Society of Automotive Engineers, Long Beach, Calif., 1–6.
11.
Sanayei, M., and Onipede, O.(1991). “Damage assessment of structures using static test data.”AIAA J., 29(7), 1174–1179.
12.
Sanayei, M., Onipede, O., and Babu, S. R.(1992). “Selection of noisy measurement locations for error reduction in static parameter identification.”AIAA J., 30(9), 2299–2309.
13.
Sanayei, M., and Saletnik, M. J.(1996a). “Parameter estimation of structures from static strain measurements. I: Formulation.”J. Struct. Engrg., ASCE, 122(5), 555–562.
14.
Sanayei, M., and Saletnik, M. J.(1996b). “Parameter estimation of structures from static strain measurements. II: Error sensitivity analysis.”J. Struct. Engrg., ASCE, 122(5), 563–572.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jun 1, 1997
Published in print: Jun 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.