Behavior of Concrete Columns Confined by Fiber Composites
Publication: Journal of Structural Engineering
Volume 123, Issue 5
Abstract
External confinement of concrete by means of high-strength fiber composites can significantly enhance its strength and ductility as well as result in large energy absorption capacity. The confinement mechanism may include fiber-wrapping of existing columns as a retrofitting measure or encasement of concrete in a fiber reinforced plastic (FRP) tube for new construction. Proper design of such hybrid columns, however, requires an accurate estimate of the performance enhancement. Current design methods use simple extension of the models developed for conventional reinforced concrete columns. Results from a series of uniaxial compression tests on concrete-filled FRP tubes are compared with the available confinement models in the literature. The present study indicates that these models generally result in overestimating the strength and unsafe design. The study also shows a unique characteristic of confinement with fiber composites in that, unlike steel, FRP curtails the dilation tendency of concrete, as it reverses the direction of volumetric strains. This paper provides a framework for better understanding of the behavior of fiber-wrapped or FRP-encased concrete columns.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ahmad, S. H., Khaloo, A. R., and Irshaid, A. (1991). “Behavior of concrete spirally confined by fiberglass filaments.”Mag. Concrete Res., 43(156), 143–148, Cement and Concrete Assoc., London, U.K.
2.
Ahmad, S. H., and Mallare, M. P. (1994). “A comparative study of models for confinement of concrete by circular spirals.”Mag. Concrete Res., 46(166), 49–56, Cement and Concrete Assoc., London, U.K.
3.
Ahmad, S. H., and Shah, S. P.(1982). “Complete triaxial stress-strain curves for concrete.”J. Struct. Engrg., ASCE, 108(4), 728–742.
4.
Chai, Y. H. (1991). “Steel jacketing of circular reinforced concrete bridge columns for enhanced flexural performance,” PhD thesis, Univ. of California, San Diego, Calif.
5.
Chen, W. F. (1982). Plasticity in reinforced concrete. McGraw-Hill Book Co., New York, N.Y.
6.
Considirè, A. (1903). Experimental researches reinforced concrete. L. F. Moisseiff, translator, McGraw-Hill Book Co., New York, N.Y.
7.
Elwi, A. A., and Murray, D. W.(1979). “A 3D hypoelastic concrete constitutive relationship.”J. Engrg. Mech., ASCE, 105(4), 623–641.
8.
Fardis, M. N., and Khalili, H. (1982). “FRP-encased concrete as a structural material.”Mag. Concrete Res., 34(121), 191–202, Cement and Concrete Assoc., London, U.K.
9.
Ge, H., and Usami, T.(1992). “Strength of concrete-filled thin-walled steel box columns: experiment.”J. Struct. Engrg., ASCE, 118(11), 3036–3054.
10.
Karabinis, A. I., and Kiousis, P. D.(1994). “Effects of confinement on concrete columns: Plasticity approach.”J. Struct. Engrg., ASCE, 120(9), 2747–2767.
11.
Mander, J. B., Priestley, M. J. N., and Park, R. J. T.(1988). “Theoretical stress-strain model for confined concrete.”J. Struct. Engrg., ASCE, 114(8), 1804–1826.
12.
Mirmiran, A. (1996). “Analytical and experimental investigation of reinforced concrete columns encased in fiberglass tubular jackets and use of fiber jacket for pile splicing.”Final Rep., Contract No. B-9135, Florida Dept. of Transp., Tallahassee, Fla.
13.
Mirmiran, A., Kargahi, M., Samaan, M. S., and Shahawy, M. (1996). “Composite FRP-concrete column with bi-directional external reinforcement.”Proc., 1st Int. Conf. Composites in Infrastructure, H. Saadatmanesh and M. R. Ehsani, eds., University of Arizona, Tucson, Ariz., 888–902.
14.
Mirmiran, A., and Shahawy, M. (1995). “A novel FRP-concrete composite construction for the infrastructure.”Proc., 13th Struct. Congress, ASCE, New York, N.Y., 1663–1666.
15.
Mirmiran, A., and Shahawy, M. (1996). “A new concrete-filled hollow FRP composite column.”Composites Part B: Engrg., 27B(3–4), 263–268, Elsevier Science Ltd., London, U.K.
16.
Nanni, A., and Bradford, N. M. (1995). “FRP jacketed concrete under uniaxial compression.”Constr. & Bldg. Mat., 9(2), 115–124, Elsevier Science Ltd., London, U.K.
17.
Newman, K., and Newman, J. B. (1971). “Failure theories and design criteria for plain concrete.”Proc., Int. Civ. Engrg. Mat. Conf. on Struct., Solid Mech. and Engrg. Des., Wiley Interscience, New York, N.Y., 936–995.
18.
Picher, F., Rochette, P., and Labossière, P. (1996). “Confinement of concrete cylinders with CFRP.”Proc., 1st Int. Conf. Composites in Infrastructure, H. Saadatmanesh and M. R. Ehsani, eds., University of Arizona, Tucson, Ariz., 829–841.
19.
Ralston, M., and Korman, R. (1989). “Put that in your pipe and cure it.”Engrg. News Rec., No. 7, Feb. 16.
20.
Richart, F. E., Brandtzaeg, A., and Brown, R. L. (1928). “A study of the failure of concrete under combined compressive stresses.”Engrg. Experimental Station Bull. No. 185, University of Illinois, Urbana, Ill.
21.
Saadatmanesh, H., Ehsani, M. R., and Li, M. W.(1994). “Strength and ductility of concrete columns externally reinforced with fiber composite straps.”ACI Struct. J., 91(4), 434–447.
22.
Saatcioglu, M., and Razvi, S. R.(1992). “Strength and ductility of confined concrete.”J. Struct. Engrg., ASCE, 118(6), 1590–1607.
23.
U.S.-Japan Planning Groups. (1992). “Recommendations for U.S.-Japan cooperative research program—Phase 5 composite and hybrid structures.”Rep. No. UMCEE 92-29, Univ. of Michigan, Ann Arbor, Mich.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: May 1, 1997
Published in print: May 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.